GE 861 EWS-31/2024-25

Amount

Dismantling of CGI/PGI Sheet fixed with screws as in roof covering complete all as specified and directed.

M&L Pre-painted galvalume aluminium zink coating GI based corrugated steel sheet .50 mm lthick of an colour having tensile strength of 550 Mpa as in roof covering/ Clading to wall, fixed with self tapping screws as specified complete all as specified and directed.

M&L Pre-painted galvalume aluminium zink coating GI based Plain steel sheet .50 mm lthick of an colour having tensile strength of 550 Mpa as in roof covering/Clading to wall, Ridge and eaves board, fixed with self tapping screws as in specified complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 Sqm and not exceeding 4.00 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

S & F Second class hard wood plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S&F Mild steel flat iron 25x6mm as in hold fasts including all necessary cutting etc complete all as specified and directed.

M&L PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in bed block for fixing of hold fasts etc complete all as specified and directed.

S&F 30 mm thick 2nd class HW plain, framed, panelled shutters (any number of pannels) with panels of timber flat on both sides (feather edged),or of veneered particle board medium density,wood particle board with commercial face veneers:supplied and fitted to chowkhats complete all as specified and directed.

S & F 35 mm thick Second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc.(with out sash bars),edges of framing plain,chamfered or rounded.fitted with cut and mitred beads for securing glass,etc,sizes of members of shutters as specified in SSR part-I, section 8,clause 8.24 (a); supplied and fitted to chowkats but devided in to squares, with plain, chamfered or rounded ,mitred and rebated sash bars,any numbers complete all as specified and directed.

S&F stainless steel wire cloth 0.36 nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S&F 100 mm long medium weight, cold rolled mild steel butt hinges complete all as specified and directed.

S&F 150mm Mild steel barrel tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and directed.

S&F 150 mm long Cast iron or malleable cast iron handles, cast type, stove enamelled black complete all as specified and directed.

S&F 300 mm MS ordinary rat rail rod pattern spring including roller and plate complete all as specified.

M&L for two coats of synthetic enamelled paint over coat of pink primer on wooden surfaces over 10cm width or girth including preparation on new surfaces complete all as specified and directed. .

Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

S&F 3 mm thick Sheet glass, ordinary quality and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store/credit to contractor and rubbish off the premises complete all as specified and directed.

Demolition of cement concrete (Unreinforced) in ground floor and paving n exc 15 cm thick blow or above ground level complete all as specified and directed.

M&L 25mm thick Cement concrete type B-0,1:2:4 (12.5mm graded crushed stone aggregate) as levelling course complete all as specified and directed.

S&F Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 for laying finishes complete all as specified and directed.

S&F Non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, as in floors set and jointed in neat cement slurry and pointed in coloured cement to match the coloured tiles over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 for laying finishes complete all as specified and directed.

M&L for Coloured glazed ceramic coloured tiles in verticale surfaces 450x350x 7 mm thick set over and including 10mm thick backing coat in cement mortar 1:4 and jointed in neat cement slurry and pointed in white or colored cement to match complete all as specified and directed.

M&L for 75mm thick Plain Cement concrete type C-2,1:3:6 mix using 40mm graded crushed stone aggregate as in sub base complete all as specified and directed.

M&L for Sand filling under floor including watering and consolidation complete all as specified and directed.

M&L for Machine pressed precast conctete interlocking paver blocks (shape as per sample in AGE B/R (P) sample room), with grey cement and no pigment and size conforming to IS 15658-2006 of 60 mm thickness M-35 Grade complete all as specified as directed by Engr-in- Charge

M&L for PCC 1:2:4 type B-1 (using 20 mm gardded crushed stone aggregate) as in copings including necessary form work, complete all as specified and directed.

M&L for 100mm thick Plain Cement concrete type B-2,1:2:4 mix using 40mm graded crushed stone aggregate as in floor/harstanding finshing the concrete surface even and smooth without using extra cement complete all as specified and directed.

M&L for preparation of old painted plastered/unplastered surfaces and applying two coats of white wash on walls complete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc) or insulation boards /slabs/blankets any thickness including cover fillets complete all as specified and directed.

M&L 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in ceiling flat and sloping with nails to timber frame complete all as specified and directed

M&L for 4mm thick veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed in wall with nails to timber frame complete all as specified and directed

Dismantling of timber scantling in framed work under 40 Sqcm, in fillet rails, posts rafters purlin etc complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section in unframed work complete all as specified and directed.

M&L for Clean swan Second class soft-wood in scantlings over 40 sqcm in section in framed work complete all as specified and directed.

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails exc 3 Sqcm and n exc 6 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed

S&F 2nd class soft wood plain fillets square rectangular or triangular in section wrought fixed with nails n exc 3 Sqcm bull nosed, splayed, chamfered or rounded on one edge or face complete all as specified and directed

S&F in repairs vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for 15mm iron pipe and fixed complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet (Squatt pattern) white complete excluding flushing cistern and flush pipe "Orissa" pattern size 580mmx440mm with integral foot rest including connection to trap anti syphonage pipe etc complete including joint between flushing pipe and socket of WC complete all as specified and directed.

S & F Vitreous china ware wash down water closet (Pedestal pattern), white (EWC) and fixed in repairs including seat cover with brass screws and excluding flush pipe and flushing cistern complete all as specified and directed.

S&F in repairs PVC Low level flushing cistern 10 Ltr capacity including all fitting such as flush pipe brackets complete all as specified and directed.

Taking up or down steel tubing 20mm bore and connections, including cleaning for refixing or removal to store/credit to contractor complete all as specified and directed.

Taking up or down steel tubing 25mm bore and connections, including cleaning for refixing or removal to store/credit to contractor complete all as specified and directed.

S&F 20 mm outer diameter 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV Stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S&F 25 mm outer diameter 3-layer PP-R polypropylene random copolymer) concealed pipes SDR 7.4 (PN 16) UV Stabilized and anti-microbial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls, ceilings or in floors etc complete all as specified and directed.

S & F in repairs 20 mm PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and directed.

S & F in repairs 25 mm PP-R Ball valves (brass insert) as per requirement of the site complete all as specified and directed.

S & F in repairs 20 mm PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

S & F in repairs 25 mm PP-R Gate valves (brass insert) as per requirement of the site complete all as specified and directed.

S&F in repairs PVC (SWR) 110 mm bore pipes single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed.

S&F in repairs 15 mm bore fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs 20 mm bore fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer hoisted and fixed in position 1000 ltrs all as specified in SSR Part- I complete all as specified and directed.

S&F in repairs Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) three layer hoisted and fixed in position 500 ltrs all as specified in SSR Part- I complete all as specified and directed.

Taking down carefully aluminium/copper point wiring (light fan socket or power) complete including making good disturbed surfaces of walls, floor to match complete all as specified and directed.

S&F for point wiring for one light point/fan point controlled by one switch with 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including PVC casing and capping medium grade of suitable size run on wall/surface with all fittings (ISI Marked) controlled by one switch including CI/MS/ wooden sunk box of required size, & as directed by Engr-in-Charge & 3mm thick plastic laminated sheet, including cutting chases to wall making good the disturbed surfaces to match with the existing specification complete all as specified and directed.

Description all as per srl item No-58 here in above but for one 3 pin 5A socket outlet independent controlled by one switch.

Description all as per srl item No-58 here in above but for one 5A socket outlet on the same board controlled by one switch.

Description all as per item No 58 above but for 3 pin socket outlet 15 Amps independent board with 2.5 Sqmm.

S&F in replacement switch piano flush type, 05 / 06 Amps single pole, one way 230 volts complete all as specified & directed.

S&F in replacement switch piano flush type, 15 / 16 Amps single pole, one way 230 volts complete all as specified & directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 5 Amp flush type complete all as specified and directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp flush type complete all as specified and directed.

S & F in replacement Modular Socket,6A - 2/3 pin combined 2 module complete all as per specified and directed.

S&F in replacement Socket outlet 3 pin, 5A, flush type complete all as specified and directed.

S&F in replacement lamp holder (Angular / Straight), insulated body, with back plate for batten fitting complete all as specified and directed.

S&F in replacement stepped type electronic fan regulator flush type on the existing sheet etc. AC, 230 volts, duly ISI marked with and including connector complete all as specified and directed.

S&F in replacement stepped type electronic fan Condenser sheet etc. AC, 230 volts, duly ISI marked complete all as specified and directed.

S&F in replacement decorative ultra slim linear LED 18 Watt 4' long warm/White colour lighting fixture with extruded al heat sink, environment friendly, energy efficient ready to use pack including LED tube complete with inbuilt electronic driver, PCB, connector block etc. including connecting up two core copper flexible cable from ceiling rose to fittings complete all as specified and directed.

S&F in replacement LED Lamp 9 W complete all as specified and directed.

S&F in replacement LED Lamp 20 W complete all as specified and directed.

S&F in replacement square type recess mounted 10W LED white/warm colour pressure die- cast aluminium luminaries in powder coated white finish in round/Square profile with optimized heat sink for efficient heat dissipation and separate replaceable electronic driver, including provision of fixing in ceiling with all items required for fixing complete all as specified and directed.

S&F in replacement sheet metal enclosure double door, single pole and neutral, AC, 230 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces complete all as specified and directed.

S&F in replacement MCB, SP(Single Pole), AC, 230 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified and directed.

S&F in replacement MCB, DP (Double Pole), AC, 230 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified and directed.

S&F in replacement MCB, Isolator (Triple pole), AC, 415 volts, B series capacity 63 Amps and making connections complete all as specified and directed.

S&F in replacement including taking down old unserviceable 1100 volt grade flexible copper conductor cable 1 sqmm two core all as specified and directed

Supply and fixing including taking down old unserviceable 1100 volt grade copper conductor cable single core 1 sq mm (three runs) in and including PVC conduit of suitable size complete all as specified and directed Note : Two runs of single core PVC insulated cable with Copper conductor unsheathed cable of size 1 Sqmm and one run of 1 Sqmm PVC insulated copper conductor single core (earth wire) and one run of PVC conduit of suitable size shall be measured as single unit run for the purpose of measurement and payment thereof.

Description all as per item No 80 above but size of cable 1.5 Sqmm complete all as specified and directed.

Description all as per item No 80 above but size of cable 2.5 Sqmm complete all as specified and directed.

S&F in replacement 1100 volt grade heavy duty cable PVC insulated aluminium conductor served with inner sheathing of PVC tape and overall PVC sheathed in service cable of size 10 sqmm 2 core complete all as specified and directed.

Description all as per item No 83 above but size 4 Sqmm 2 core complete all as specified and directed.

Description all as per item No 83 above but size 6 Sqmm 2 core complete all as specified and directed.

S & F in replacement XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sqmm 4 core complete all as specified and directed.

S&F in replacement casing capping 20 mm complete all as specified and directed.

S&F in replacement casing capping 22 mm complete all as specified and directed.

S&F in replacement Switch socket combination 2 in 1, 3 pin, 15 Amp Box complete all as specified and directed.

S&F in replacement Plug top 5/6A complete all as specified and directed.

S&F in replacement Plug top 15/16A complete all as specified and directed.

S&F in replacement Bed switch 5/6A complete all as specified and directed.

S&F in replacement Connecting & testing Change over switch 3 Phase 415V on load of rating 63 AMPS and including sheet enclosure complete including taking out to old unserviceable switch complete all as specified and directed.

S&F in replacement Connecting & testing Main switch 3 Phase 415V on load of rating 100 AMPS and including sheet enclosure complete including taking out to old unserviceable switch complete all as specified and directed.

S&F in replacement LED Flood light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminium hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all specified and directed.

Supply and Fixing in replacement exhaust fan 250 mm sweep PVC body with louver, 230 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in replacement exhaust fan 450 mm sweep STEEL body with louver, 230 volts AC single phase, 50 Hz, ISI marked, including necessary work in wall/sheet, including connection cable, nut bolt and other fixing material complete all as specified and directed by Engr-in-Charge.

Supply & Fixing in replacement ceiling fan 1200 mm sweep ,copper winding, double ball bearing with aluminium blade set of 3, length of down rod not less than 300 mm, single phase , 240 volts ISI marked , including connection with three core copper wire etc complete all as specified and directed.

Supply & Fixing in replacement water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostat, NRV, connection piece etc complete all as specified and directed.

Supply and fixing in replacement wall fan 450mm high speed, 230 volts single phase with jerk free oscillation, smooth running, three blades, pull cords including fixing arrangement complete all as specified and directed.

Asian Marketing Co (BID ID -3057447)

M/S Hilal Builders (BID ID -3057259)

FIRDOUS AHMAD BABA (BID ID -3066712)

M/S BASHIR AHMAD AND SONS (BID ID -3054470)