SPECIAL REPAIR TO BOUNDARY WALL OF KENDRIYA VIDYALAYA LUCKNOW CANTT UNDER GE (WEST) LUCKNOW

M & L for brickwork with fly ash bricks, Modular bricks straight or curved on plan exc 6m mean radius, built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed.

M & L for 15 mm thick rendering cement plastering on other than fair faces of brick work or concrete surfaces in CM (1:4) and finished even and smooth (without using extra cement) complete all as specified and directed.

M & L for repair to plaster by using readymix mixture of thickness 12 mm to 15 mm and plastering the wall surface with white cement based polymer modified self curing mortar, including taking down cement or cement lime plaster, raking out joints and disposal of rubbish complete all as specified and directed.

M&L for form work to sides and soffits of beams lintel band and the like complete all as specified and directed.

S&F for MS TMT bars 8mm to 10mm dia and over , cut to length , bent to shape required incl cranking bending spirally for hooping for coloumn hooking ends and binding with and incl mild steel wire annealed not less than 0.9mm dia or securing with clips complete all as specified and directed.

All as per item No 5 above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed.

M & L for Reinforced cement concrete (Nominal mix) 1:2:4, type B-1 (using 20 mm graded stone agg) in beam cantilevers, bressummers, lintels over 1.5 m span etc including demolition of RCC complete all as specified and directed.

S&F for mild steel work such as Hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165s in any shape or size as indicated including taking down complete all as specified and as directed.

S&F for screw bolt (machine made) with hexagonal or square heads at one end and screwed the other each screw to be fitted with one washer and one hexagonal or square nut length of bolt 7.5cm and dia of shank 12 mm complete all as specified and as directed.

M&L for preparation of new steel or iron surfaces exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed.