Loading
Loading…
Loading…
Tender Value
Refer Docs
Closing Date
13 Jul 2026, 10:30 amClosed
Single Packet
Normal Tender
No
Not Applicable
Itemwise/Consigneewise
Lowest to Highest
CONSIGNEE
Not Applicable
90 days
Expenditure
General
LP
2 conditions · 2 needing a document upload
Tenderer is required to clearly mention the make/brand and submit detailed Specification/catalogue (if any) of the offered product.
Tenderers with satisfactory past performance for the same or similar item to anyof the Zonal Railways/PUs shall only be eligible for full/bulk order. Tenderers are instructed to upload Receipt note, Receipted challan, Inspection Certificate or any other receipt document along with bid as a proof of supply document failing which their offer will not be considered. Purchase Order is not considered as performance.
16 conditions
Submission of EMD & SD is governed by SECR Tender condition 2019 and Correction slips with latest updation till the date of tender opening. (i) Submission of EMD@2% of the estimated value of the tender subject to Max. Rs.20 Lakh as per Correction Slip No.001. (ii) Submission of SD: For all tenders issued performance security/security deposit shall be 5% of total value of contract and shall be taken from all vendors for contract value above Rs.25 Lakhs subject to the applicable exemptions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
Please enter the percentage of local content in the material being offered. Please enter 0 for fully imported items, and 100 for fully indigenous items. The definition and calculation of local content shall be in accordance with the Make in India policy as incorporated in the tender conditions.
By Consignee or his representative at consignee premises.
SECR General Tender condition 2019 along with all latest correction slips uploaded on IREPS website is applicable.
Firm should clearly state HSN code of eight digit and also mention that under which chapter and sub- heading of central excise tariff, their GST tariff falls.
1 location across Chhattisgarh · 33 Numbers total
PREGABALIN 75MG + NORTRIPTYLINE 10MG TAB IN STRIP
11265309~BLW
11265309
Limited - Indigenous
Goods
Chhattisgarh
₹0
Exempted
13 Jul 2026
29 Jun 2026
6 items · 33 Numbers total
Tyre Defect gauge(wagon) of stainless steel of 3.2 mm thick (for corrosion resistance) as per Drawing of good stock Plate no 52 Rule 3.3.5 & S 4.19.1 of IRCA PT-III ( 2020) & As per attached Drawing m ake- PIE or ganapathy or PRASAD or similar.COMPLETE SET IN REXINE BAG AND DULY CALIBRATED CERTIFICATE ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BCN/BSP, SECR | Chhattisgarh | 4.00 Numbers |
| Total | 4 Numbers | |
Set of CBC gauge consist of Gauge no 1 , 2 (Guard arm expansion gauge), gauge no 3 (Guard arm distortion and contour gauge no 3 Go and no go type) and 4 (Knuckle stretch and nose wear gauge) of Maintenance manual for wagons latest edition. made up of stainless steel alongwith calibration certificate. Make: PIE, Ganapathy, Prasad, AOGE [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BCN/BSP, SECR | Chhattisgarh | 4.00 Numbers |
| Total | 4 Numbers | |
KNUCKLE LOCKING FACE GAUGE (GAUGE NO. 5 ) OF G-80 MANUAL MADE OF HARDNESS STAI NLESS STEEL AS PER ATTACHED PHOTO, WITH CALIBRATION CERTIFICATE OF NABL APPROVED LAB MAKE P IE or GANAPATHY or PRASAD or SIMILAR ACCEPTED MAKE - GANAPATHY [ Warranty Period: 30 Months aft er the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BCN/BSP, SECR | Chhattisgarh | 4.00 Numbers |
| Total | 4 Numbers | |
Bottom Anticreep and Horizontal Location gauge for wagon RDSO DRAWING NO. WD84073-S- 3-RC With calibration certificate from NABL firm, Preferably made up of Stainless steel with engraved detail s of drawing no. name of gauge and manufacturer. Make: PIE, Prasad, Ganapathy [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BCN/BSP, SECR | Chhattisgarh | 4.00 Numbers |
| Total | 4 Numbers | |
Supply of gauge for checking anti creep lug of rotary lever of wagons (Gauge No-7) With calib ration certificate from NABL firm, Preferably made up of Stainless steel with engraved details of drawing no . name of gauge and manufacturer. Make: PIE, Prasad, Ganapathy [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BCN/BSP, SECR | Chhattisgarh | 4.00 Numbers |
| Total | 4 Numbers | |
Gauge for checking lock wear, Gauge no 8 (Lock wear Gauge, Gauge No. - 8 (CBC Wagon)) W ith calibration certificate from NABL firm, Preferably made up of Stainless steel with engraved details of dra wing no. name of gauge and manufacturer. Make: PIE, Prasad, Ganapathy [ Warranty Period: 30 Months after the date of delivery ] ]
| Delivery Location | State | Quantity |
|---|---|---|
| SSE/BCN/BSP, SECR | Chhattisgarh | 13.00 Numbers |
| Total | 13 Numbers | |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
HTML
nit.pdf
NIT
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .