Construction of Waiting Room, Toilet and additional works to the Additional Medical Facility Centre at SLM Home Campus at Krishnasamy Road in Ward No. 70 of Central Zone.

Amount

1.Earthwork excavating and depositing on bank with initial lead of 10m & initial lift of 2m in Hard stiff clay, stiff black cotton, hard red earth, shales, murram,gravel,stoney earth and earth mixed with small size boulders etc complete

2.Plain Cement Concrete 1:4:8 using 40mm size ISS HBG metal including cost and conveyance of all materials etc., complete as per standard specification

3.Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm including cost of materials and labour charges etc., as per standard specification

4.Plastering with cm 1:5 12mm tk for all external and internal wall surface etc complete

5.Supply and fixing of SFRC cover 900x900mm etc complte

6.Supply and fixing of FRP cover 450x450mm etc complte

7.Supply and fixing of FRP cover 710x710 mm etc complte

8.Supply and Filling with well gravel layer by layer inlcuding consolidation charges etc complete

9.Plain Cement Concrete 1:2:4 using 20mm size jelly including cost and conveyance of all materials etc., complete as per standard specification

10.Paving thefloor with fully polised Granite stone of 20mm thick of size 4'x2' laid over a cement mortar1:3 mix, fixing the slab in true tight angles applying cement slurry and pointed with white cement and colour pigments and curing etc. complete as directed by depat. officers.

11.Repolishing the marble flooring including hire charges for polishing machine etc complete

12.Supply and fixingin position of European water closet with 'S'(or)'P' trap of approved color and quality with dauble flapped rigid PVC sheet cover the CP brass hinges etc., complete complying with standard specification including supply and fixing in position o 10litre capacity glazed porcelain low level flushing tank on wall including 2 Nos of 15mm &brass nipple, 15mm dia PVC brass connection, 15mm dia GI wheel value, 15mm dia Nylon connection and giving necessary water supply connection etc.,complete complying with standard specification

13.Wash Hand Basin of size 550mm x 400mm with all accessories such as Cast Iron Brackets, 32mm dia CP Waste Coupling, Rubber Plug and Chain, 32mm dia ‘B’ Class GI Waste Pipe, 15mm dia GM Wheel Valve, 15mm dia Nylon Connection, 15mm dia Brass Nipples,etc complete

14.Supply and fixing of Stainless steel sink of size 5 feet x 2 feet including all charges etc complete

15.FALSE CEILING WITH GYPSUM BOARD Providing and fixing suspended false ceiling using SAINT - GOBAIN GYPROC or Equivalent make which includes providing and fixing GI perimeter channel of size 0.50mm thick having one flange of 20mm and another flange of 30mm and a web of 27mm along with perimeter of ceiling, screw fixed to brickwall / partition with the help of nylon sleeved and screws at 610mm centres. Then suspending GI intermediate channels of size 45mm, 0.9mm thick with two flange of 15mm each from the sofit at 1220mm centres with ceiling angle of width 25mm x 10mm X 0.55mm thick fixed to sofit with GI cleat and steel expansion fasteners. ceiling section 0.55mm thickness having knurled web of 51.5mm and two flanges of 26mm each with lops of 10.5mm are then fixed to the intermediate channel with the help of connecting clips and in direction perpendicular to the intermediate channel

16.GYPBOARD DOUBLE SKIN PARTITION Providing and fixing of Gypsum Dry wall Double skin partition of 75 mm thick using SAINT - GOBAIN GYPROC or Equivalent make and the partition shall be of one layers of tapered edge 12.5mm thk Gyp board screw fixed with dry wall screw of 25mm at 300mm c/c to either side of 48mm studs. GI steel sections to be placed at 610 mm c/c in 50mm floor and ceiling channel 0.55mm thick having equal flanges of 32mm made of GI steel with joints staggered to avoid leakage through joints. Finally square and tapered edges of the boards are to be finished so as to have a flush look which includes filling and finishing with jointing compound, joint paper and 2 coats of Drywall top Coat suitable for Gypsum upto primer level.As per India Gypsum Specs.Note: Angle Bead to be used at external angles to get straight line finish & protection from normal impacts.

17.Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside. Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.

18. Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

19.Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work

20.FRP Door Sutter with FRP Door Frames made out of FRP Sheets of 3mm thick of over all size 65mm x 50mm with rebate suitably reinforced using MS Angle / Flats, cost of holdfasts and Solid Core FRP Shutter Panel of 5mm thick and hollow core frames of 3m wall thickness for styles and rails etc., of sizes specified by Engineers

21.Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

22.Manufacturing, Supplying and fixing acrylic letters of size 23cm height including scaffolding charges etc complete

23.Providing 7 rows "Y" type barbed wire fencing over compound wall using "L" angle 50X50X6mm fixing 1.35m ht. 2.40m C/C C.C 1:3:6 mix using 20mm jelly etc complte

24.Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete

25.Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete

26.Providing and laying of RubberMouldedHydraulic Pressed Paver Block size 63mmthick in uniform shape of approved make to be laid in lorrying bone pattern with approved non stickingsurface inthetopandtherate including levelingthebase,preparationofsubbase with sand cushion 100mmthick, laying out the pavement, cut the pieces to fit the edge, vibrating the pavers, sweeping the sand grouting, providing transporting, loading unloading and laying of paver block as per standard specification.

27.Supply and delivery of water supply materials ISI make etc complete

110mm pvc coupling

110mm pvc Elbow

110mm pvc Tee

110mm pvc shoe

110mm Air cowl

110mm pvc bend

110x75mm bush

110x75mm Nahini trap

75mm pvc coupling

75mm pvc Elbow

75mm pvc Tee

75mm Pvc shoe

75mm Air cowl

63mm pvc coupling

63mm pvc Elbow

63mm pvc Tee

63mm pvc shoe

63mm pvc End cap

50mm pvc coupling

50mm pvc Elbow

50mm pvc Tee

50mm pvc shoe

40mm upvc coupling

40mm upvc Elbow

40mm upvc Tee

40mm upvc shoe

40mm upvc MTA

40mm tank nipple

40mm Brass valve

25mm upvc Coupling

25mm upvc Elbow

25mm upvc Tee

25mm upvc shoe

25mm upvc MTA

25mm upvc union

25mm brass valve

20mm upvc coupling

20mm upvc Elbow

20mm upvc Tee

20mm Brass valve

20mm Cpvc coupling

20mm Cpvc Elbow

20mm Cpvc Tee

20mm cpvc shoe

20mm cpvc Mta

20x15mm Cpvc Brass Elbow

20x15mm Cpvc Brass Tee

6" patta clamp

12" patta clamp

Float valve

upvc paste 250ml

28.Supply and delivery of sanitary fittings ISI make etc complete

CP two way tap with healthfauset

15mm CP Angle valve

15mm pillar cock

15mm Long body tap

5" gratings

wall mixture

shower set

SS Elbow Action Tap

29.Supply and fixing of 2 Hp Submersible motor pump set etc complete

30.Supplying, Laying and jointing UPVC & CPVC pipes of approved quality and best variety comforming to ISS and with ISI mark of following sizes including cutting threading and fixing UPVC and CPVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs, clamps and screws making holes on the wall on drilling holes and making good the dismantled portions to original condition with necessary brick work and concrete and plastering work wherever necessary etc complete

A.40mm upvc pipe

B.25mm Upvc pipe

C.20mm upvc pipe

D.20mm Cpvc pipe

31.Supplying, Laying and jointing PVC pipes of approved quality and best variety comforming to ISS and with ISI mark of following sizes including cutting threading and fixing PVC specials but excluding cost of such specials and fixing to wall with necessary teak wood plugs clamps and screws making holes on the wall on drilling holes and making good the dismantled portions to original condition with necessary brick work and concrete and plastering work wherever necessary etc complete

A.160mm pvc pipe

B.110mm Pvc pipe

C.75mm pvc pipe

D.63mm Pvc pipe

E.50mm Pvc pipe

32.Supplying and fixing 110mm dia PVC rain water down fall pipe including cost of pipe, shoe, bond, brackets, teakwood plugs, etc

33.Supply and Laying of 4x10 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.45 metre and refilling the earth to make good.

34.Supply and clarnping of 4 x 6 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps

35.Supply and laying of of 2x2.5 sq.mm Armoured Copper Cables on post or on wall with MS clamps

36.Supply and Run of 5 of 2.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 2.5 sq.mm copper wire and making good of the concealed position.

37.Supply and Run of 4 of 4 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion with suitable colour

38.Supply and Run of 3 of 4 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with continuous earth wire connection by 4 sq.mm. PVC insulated SC unsheathed FRLS copper wire and making good of the concealed portion with suitable colour.

39.Supply and laying of FRLS PVC insulated 2 core 1.5 sq.mm. Armoured Copper Cable on ceiling / wall using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers.

40.Supply and laying of CAT 6 cable inlcuding all charges etc complete

41.Supply and run of 2 Core 1.5 sq.mm Shielded Copper Speaker Wire etc complete

42.Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe Concealed in wall and ceiling with PVC accessories with Module GI switch box in flush with wall with 6A one way module switch with module front plate continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with suitable colour for Concealed PVC Light point / fan point (for electronic regulator) ( 4 points / Coil)

43.Wiring with 2 x1.5 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 6A one way module switch and 1 no. 6A 3/2 pin module socket with module front plate with continuous earth wire connection of 1.5 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for concealed PVC pipe Plug point

44.Wiring with 2 x 4 sq.mm. PVC insulated single core unsheathed FRLS copper conductor of 1100 V grade in suitablePVC rigid pipe Concealed in wall and ceiling with PVC accessories with suitable Module GI switch box in flush with wall with 1 no. 16A one way module switch and 1 no. 16A 3/2 pin module socket with module front plate with continuous earth wire connection of 4 sq.mm copper wire and making good of the concealed portion with painting of suitable colour for Concealed PVC pipe power Plug point ( 8 points / Coil)

45.Supply and laying of HDMI cable 20m set etc complete

46.supply and fixing of 65 mm dia. (2 -1/2") GI pipe (class B) of 4 metre length with MS base plate duly welded at the bottom with concreting with construction of masonary pedestal with suitable SMC box with door arrangement to house 6A SP MCB switch, 2/4 way connector on suitable hylem sheet with 2 nos pf 1 metre 32mm dia. GI pipe (class B) Complete with suitable MS clamps for LED steet light fitting and SMC box with PVC unsheathed copper leads from SMC box to fitting and with painting of suitable colour .

47.supply and fixing of 12"x12" inch square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

48.supply and fixing of 8"x8" square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

49.supply and fixing of 6"x6" square type Recessed fitting with LED (Higher end) on false Ceiling with suitable hanging support from ceiling with PVC unsheathed copper leads from terminals to the fitting.

50.supply and fixing of 18W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.

51.supply and fixing of 30W LED Round type Recessed fitting with LED (Higher end) on false Ceiling from ceiling with PVC unsheathed copper leads from terminals to the fitting.

52.Supply and fixing of 6W spot light etc complete

53.Supply and fixing of 3W spot light etc complete

54.supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .

55.Supply and fixing of 100W Led Light fitting etc complete

56.supply and fixing of 1200mm (48") sweep AC ceiling fan 5 star rated complete ( Higher end) with 2 module 100W fan step regulator (Higher end) with 300mm down rod with fan clamp with side plates and cross arm of size 300/450mm etc

57.Supply and fixing of Ac Exaust fan 230mm dia etc complte

58.SUPPLY & INSTALLATION OF 1.5 TR split type AIR-CONDITIONER WITH COPPER COIL

59.Supply and installation of 5 KVA capacity Automatic Voltage Stabilizer etc complete

60.Supply and fixing of MS stand for fixing outdoor unit etc complete

61.Supply and fixing of Copper Refrigerant Piping of 7/8” dia etc complete

62.Earthing arrangements with GI Earth Plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.

63.Supply and fixing of 7 segment 8 way 63A TPN MCB sheet steel distribution board (Higher end) with metal / acrylic door cover flush type /surface type fitted with busbars and neutral links with single / three phase MCB outgoings and seperate 4 way provision for accomodating one no. 4 pole incoming MCB / Isolator and another seperate 4 way provision for accomodating one no. 4 pole ELCB / RCD (totally 8 ways in one segment) (3x 6 ways in each segment) and seperate provision for MCB / Isolators ( totally 24 nos.) for sub incomers in 3 segments with lable holder and provison for taking up cable for size not less than 35 sq.mm. with the following on wall with earth connection only.

64.Supply and fixing of 6 way Horizontal Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63 A 4 P MCB switch as incoming and 18 nos. 6A to 32A SP MCB as outgoing on wall with earth connection only

65.Supply, installation, testing and commissioning of conventional 2 Zone Fire Alarm Control Panel having the rating of 24 volt DC power supply, consisting 230 / 24 volt SMPS unit, 2 Nos. of 12 volt 7 AH standby batteries, suitably mounted on wall using fixing accessories like screws, plug, clamps and etc., as per standard methods and as directed by the Departmental Officers.

66.Supply and fixing of smoke Detectors with base with Binary coded address setting. Dual LED’s for 360° visibility etc complete

67. Supply and fixing of Manual Call Point - Resettable type - with back box with Binary coded address setting with Status LED for 360° visibility.

68.Supply and fixing of ABS Sounder cum strobe - 24V, 85 db

69.Supply and fixing of Response indicator for all detectors located above false ceiling.

70. POWER SUPPLY : 24VDC Power Supply with 5 amp rating, having LED indications for Power supply ON,battery Fail,Battery Charging,battery back up etc.

71.Painting with Wall Putty two coats inlcuding all charges etc complete

72.Providing and Applying of Solar reflective Paint, acrylic polymer based elastometric water proofing coating having Solar Reflective Index more than 90 % as per ASTM E 903, specific Gravity of 1.30+/-0.10. For Existing Surface: The Surface Preparation including Jet wash , the Cracks are filled wherever required below 3mm of crack and application of three coats of paint to form 1mm thickness

73.Painting the wall with Texture finish paint including labour charges etc complete

74.Painting the Wall Two Coats with approved colour Emulsion paint two coats over prime coat for Wall surfaces etc., complete complying with standard specifications and as directed by the departmental officers.

75.Painting with enamel paint two coats over prime coat inlcuding all charges etc complete