SPECIAL REPAIRS TO BLDG NO P-14 MEDICAL STORE T-29-41 (PAED AND ENT OPD) P-22 OFFICERS WARD MH AND P-94/2 (JCOs MD ACCN) OF SAW AT KIRAN LINE IN THE AREA OF AGE B/R I AT GE (N) AHMEDNAGAR

Amount

Demolition of cement concrete un-reinforced in ground floors and pavings not exceeding 15cm thickness below or above ground level etc complete all as specified and directed by Engineer-in-Charge

Dismantling of stone slab and tiles of any description or thickness of floor aprons etc laid bedded and pointed in any mortar etc complete all as specified and directed by Engineer-in-Charge

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises etc complete all as specified and directed by Engineer-in-Charge

Demolition of reinforced cement concrete of any description and any position (reinforcement cut as required to facilitate demolition) etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:2:4), type B1, 75mm thick (using 20mm graded stone aggregate) as in sub base, basement slab and mass concrete including all necessary form work etc complete all as specified and directed by Engineer-in-Charge

M&L for join free non skid coloured ceramic tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick cement screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for join free non skid coloured ceramic tiles 8 to 10mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in vertical surfaces such as skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 10mm thick backing coat in cement and sand mortar (1:4) complete all as specified and as directed.

M&L for non skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 15mm thick cement screed bed in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for Glazed coloured ceramic tiles of size 350x250x7mm or 450x350x7mm thick, grade B-III in vertical surface such as skirting / dado etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles laid over and including 10mm thick rendering in cement and sand mortar (1:4) etc complete all as specified and directed by Engineer-in-Charge

M&L for virtified coloured ceramic tiles of size 600 x 600mm thick, grade B-III as in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles laid over and including 15mm thick rendering in cement and sand mortar (1:6) on fair faces of brick / concrete wall surfaces complete all as specified and as directed.

All as per item No 10 (here-in-before) but on sirtting / dado over and including screed bed in cement and sand mortar (1:4)

M&L for brickwork with old size fly ash bricks, straight or curved on plan exceeding 6m mean radius, built in cement and sand mortar (1:6) etc complete all as specified and directed by Engineer-in-Charge

M&L for 40mm thick PCC (1:2:4) Type B-1 (using 20mm graded stone aggregate) and finished concrete surface even and smooth without using extra cement etc complete all as specified and directed by Engineer-in-Charge

Taking down cement plaster on brick or stone wall surfaces including raking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 15mm thick in cement and sand mortar (1:6) on fair surfaces of brick/concrete wall surfaces and finished even and smooth without using extra cement with sagol finish etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10mm thick in cement and sand mortar (1:4) on stone masonry/concrete surfaces on wall or roof finished even and smooth, without using extra cement etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of newly plastered wall surfaces and applying two coats of oil bound distemper etc complete all as specified and directed by Engineer-in-Charge.

M&L for complete removal of existing treatment on walls, preparation of surfaces and applying two coats of oil bound distemper over a coat of primer etc complete all as specified and directed by Engineer-in-Charge

M&L for applying three coats of white wash on walls including preparation of new plastered surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old plastered surfaces and applying one coat of white wash on ceiling etc complete all as specified and directed by Engineer-in-Charge

M&L for rendering 10mm thick in cement and sand mortar (1:4) on Ceiling, surfaces finished even and smooth, without using extra cement with sagol finish etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new / old plastered surfaces and applying three coats of white wash on ceiling plastered surfaces etc complete all as specified and directed by Engineer-in-Charge

M&L for PCC (1:3:6), type C1, 75mm thick (using 40mm graded stone aggregate) as in sub base of floor etc complete all as specified and directed by Engineer-in-Charge

M&L screed bed 15mm thick in cement and snad mortar (1:6) for laying floor finishes to receive tiles and stone slab etc complete all as specified and directed by Engineer-in-Charge

M&L for 25-40mm thick shahabad stone as in flooring etc complete all as specified and directed by Engineer-in-Charge

M&L for expanded metal cut to length bent to shape required including annealed mild steel wire not less than 0.9mm dia is exc 4kg or fixing with galvanised steel staples etc complete all as specified and directed by Engineer-in-Charge

M&L for TMT bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed by Engineer-in-Charge

Dismantling of ceiling boards (fibre, pulp, insulation, etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets etc complete all as specified and directed by Engineer-in-Charge

Material and labour of false ceiling 10mm thick plain non asbestos building "E" board with decorative finish water proofed on ne side fixed on and including powder coated GI fabricated grid of 60cm x 60cm made out of main runner of "T" section of size 32mm x 24mm x0.30mm cross runner made out of T of section of size 24mmx 24mm x 0.30mm and around angular section of size 22mm x 22mm x 0.70mm with GI clip and level adjuster duly suspended by 2mm dia GI wire fixed to roof of 600mm centre to centre as per manufacturers instructions etc complete all as specified and directed by Engineer-in-Charge

Dismantling of single layer mangalore pattern or similar tiles as in roofing etc complete all as specified and directed by Engineer-in-Charge

Material and labour for roof tiles mangalore pattern interlocking at side joints laid dry etc complete all as specified and directed by Engineer-in-Charge

All as per item No 31 (here-in-before) but except tiles

Material and labour for ridge or hip tiles to suit mangalore pattern of roofing tiles bedded and pointed in cement and sand mortar (1:6) etc etc complete all as specified and directed by Engineer-in-Charge

Dismantling of plain or corrugated steel sheeting any gauge thickness including nanital or similar pattern roof covering etc complete all as specified and as directed.

S&F pre colour coated high tensile steel galvalume sheet roofing with yield strength (550 Mpa) pre painted with Aluminium (55%) and Zinc (45%) alloy coating applied through continuous hot dip process having total coated thickness (TCT) of 0.50mm with minimum coating mass on both sides @ 150 gram/Sqm, in length and width as per site condition fixed with compitable accessories as per manufacturers instructions through specialist agency and the profile and the shade shall be as approved by the GE and etc complete all as specified and directed by Engineer-in-Charge. Note : End laps not less than 25 cm and side lap at least one corrugation, mastic lapping tape is to be provided at the laps and stitching screws should be provided at the side lap & end laps at interval of 600mm, eaves filler strip to be bonded to the valleys or pans with flexible water proof silicon sealant. Self tapping screw 65 mm long and 32 mm long is to be provided at crest and valleys respectively.

Taking down steel window/ventilators of any description and size etc complete all as specified and directed by Engineer-in-Charge

Supplied and welding standard projecting/box butt hinges for steel window in repairs etc complete all as specified and directed by Engineer-in-Charge

S&F steel window with side hung shutters for glazing/gauging including projecting type hinges with steel handle and steel peg stay, complete with sash bar, glazing bars dovetailed or welded etc complete all as specified and directed by Engineer-in-Charge. Note :- Wire cloth glass guard bars and painting shall be measured and paid separately

S&F steel ventilator with top hung shutter including hinges, steel peg stay, etc complete all as specified and directed by Engineer-in-Charge. Note :- Wire cloth glass guard bars and painting shall be measured and paid separately

Supply & Fix mild steel 10mm dia square bar to steel window/ventilator as in guard bars conforming to Fe-290- Gde E-165 etc complete all as specified and directed by Engineer-in-Charge

S&F Powder coated aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed by Engineer-in-Charge (Thickness of powder coating not less than 50 micron).

S&F powder coated aluminium window shutters, sliding type having thickness of powder coating not less than 50 micron and colour as approved by GE, without sash bars using aluminium section weighing not less than 0.55 Kg/m including necessary joining cleats, galzing clips, rubber neoprene packing, powder coated aluminium snap beading screws, roller, interlocking handles etc complete all as specified and directed by Engineer-in-Charge Note :- Powder coated aluminium frame, wire mesh and sheet glass shall be measured and paid separately under relevant items. The unit rate quoted shall be deemed to include the cost of all builders hardware such as stoppers, handles, glazing clips, rollers and locking arrangements etc.

Supply and fix 4mm thick sheet glass, ordinary quality and glazing with solar control flim 50 micron thick reflective type sticked to glass panes exc 0.50 sqm each pane etc as per manufacture instruction etc complete all as specified and directed by Engineer-in-Charge

S&F anodised aluminium door shutters of aluminum section weighing 0.55 kg/mtr, including necessary joining cleats, galzing clips, rubber neoprene packing, handle 2 Nos in each door hinges, anodised aluminium snap beading screws, etc complete all as specified and directed by Engineer-in-Charge

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or driling out old glazing pins/clips and providing and fixing new one etc complete all as specified and directed by Engineer-in-Charge

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square/rectangular not exceeding 0.50 Sqm in each pane etc complete all as specified and directed by Engineer-in-Charge

S&F 3mm thick figured glass, pin head type and glazing with oil putty in square/rectangular not exceeding 0.50 Sqm in each pane all as specified and as directed.

Taking down chowkats or frames not exc 1.5 Sqm each with shutter (without taking of shutters from the frame) etc complete all as specified and directed by Engineer-in-Charge

Taking down shutters any description exceeding 1 sqm but not exceeding 2 sqm each and refixing the same opening complete as specified and directed (Note : 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.) etc complete all as specified and directed by Engineer-in-Charge

S&F 35 mm thick second class hardwood factory made plained framed paneled shutters (two panels) with lock rail and paneled of 9mnm B.W.P. commercial plywood. The size of rail ans stile as per IS:1003 (Part 1) klin seasoned and chemically presure treated etc complete all as specified and directed by Engineer-in-Charge

M&L for 2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, size of members as specified in SSR Part-1 section 8 etc complete all as specified and directed by Engineer-in-Charge

S&F stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed by Engineer-in-Charge

All as per item no 52 (here-in-before) but fixed in repairs.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge metred out at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS square tube inside the drilling 100mm long MS screws using PVC fastner etc complete all as specified and directed by Engineer-in-Charge

S&F factory made solid PVC moulded door shutter with wood free EPS 28 to 30mm thick (styles) with 2,4 or 6 raised panel design with 2mm thick moulded PVC sheet on front face and 2mm plain colour PVC sheet on backface, supplying and fixing in frame at site as per specification etc complete all as specified and directed by Engineer-in-Charge (Note : The quoted rates included for providing 02 Nos of 125mm size aluminium anodised handle, 03 Nos of 100mm aluminium hinges and 2 Nos of 150mm size aluminium anodised tower bolt of extruded section for each shutter all as specified and as directed).

S&F 100mm butt hinges, medium weight, stainless steel and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F 125mm butt hinges, medium weight, cold rolled mid steel and fixed etc complete all as specified and directed by Engineer-in-Charge

S&F 300mm long mild steel, sliding door bolt, plate type stove enamelled black with bright with bolt not less than 12mm dia with and a including minnium of 6 bolt and nut, four on bolt plate and two on staple plate etc complete all as specified and directed by Engineer-in-Charge

S&F 200 mm long aluminium anodised barrel tower bolts of extruded section etc complete all as specified and directed by Engineer-in-Charge

S&F 150mm size extruded alloy aluminium handles, fabricated type, anodised etc complete all as specified and directed by Engineer-in-Charge

S&F 150mm long floor door stoper of aluminium alloy body and tongue, anodised with had drawn steel spring etc complete all as specified and directed by Engineer-in-Charge

S&F 150mm long mild steel pressed handle oval type tove enamelled black etc complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint exceeding 10 cm width and girth etc complete all as specified and directed by Engineer-in-Charge

M&L preparation of new or previsioly untreated steel surfaces of any description not exceeding 10cm width or girth not otherwi se described and applying two coats of synthetic enamel paint over a coat of red oxide zinc primer etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat of pink primer of any description, not otherwise described over 10cm width or girth etc complete all as specified and directed by Engineer-in-Charge

M&L for preparation of old painted wooden surface and applying one coats of synthetic enamel paint not otherwise described over 10cm width or girth etc complete all as specified and directed by Engineer-in-Charge

Supply and fixed in repairs mild steel 32mm dia decorative powder coated curtain roads fixing with brackets etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs wash hand basin vitreous China coloured , flat back pedastal pattern of size 630 X 510 mm, (for hospital use) waste chain and plug and porcelain stopper, waste pipe, incl cutting for and pinning in ends of brackets in cm 1:3 etc complete all as .Make :- Cat Part No S2040111 & S2090107 Of Cera or equivalent in Parryware / Hindware

Supply and fix in repair health faucet (hand shower) with 8 mm dia 1 m long flexible tube wall mounted / hooked all as per Cat Part No 573 of JAQUAR OR ITS EQUVIVALENT IN MARC / PLUMBER all as directed.

Taking up or down steel water tubing and connections of 15mm bore pipe etc complete all as specified and directed by Engineer-in-Charge

Taking up or down steel water tubing and connections of 20mm bore pipe etc complete all as specified and directed by Engineer-in-Charge

S&F for CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on wall/celling or laying in floors com 16mm bore outer dia of pipe etc complete all as specified and directed by Engineer-in-Charge

S&F 15mm dia GI tubing medium grade with necessary fittings and fixtures fixed to wall ceiling or laid in floors etc complete all as specified and directed by Engineer-in-Charge

S&F 20mm dia GI tubing medium grade with necessary fittings and fixtures fixed to wall ceiling or laid in floors etc complete all as specified and directed by Engineer-in-Charge

Taking down rain water pipes (any size or pattern) including all fitings, heads, shoes, bends, swan-neck etc. including cleaning or refxing or removal store ( measured overall as fixed along the center line over fittings and accessories) etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs chromium plated grating 100mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs bib cock, fancy type chromium plated, screwed down, screwed for iron pipe, 15mm bore or for brass ferrule etc complete all as specified and directed by Engineer-in-Charge. (Make : Parryware or any equivalant)

Supply and fix in repair stop valve, 15 mm dia, cast copper alloy,screwed down high pressure screwed down high pressure with cruitch or butterfly handle screwed both ends for iron pipe or for unions all as directed. Make:- Cat part No MOR 1320 (Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

S&F in repairs 20mm gun metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe fixed etc complete all as specified and directed by Engineer-in-Charge

S&F 20mm dia ball valve PTMT of weight not less than 210 gms each with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs, shower rose with shower arm from Make:- Cat part No MARC MSR1050 (Shower) and MOR 1260(Shower arm) from MARC or equivalent in Make Plumber,ESS-ESS.

S&F in repairs PVC connection 15mm bore length not less than 450 mm long with both ends PTMT nuts etc complete all as specified and directed by Engineer-in-Charge

S&F 110mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) vent cowl suitable for 75mm dia pipe etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) branch piece double (single Y) equal or unequal for 110mm dia pipe with access door etc complete all as specified and directed by Engineer-in-Charge

S&F PVC (SWR) bends of any radius of size 110mm dia etc complete all as specified and directed by Engineer-in-Charge

S&F 75mm dia PVC (SWR) bends with access door any radius of size etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs decorative towel ring chrominium plated 150mm dia fixed with (CP) brass screws of approved quallity etc complete all as specified and directed by Engineer-in-Charge

S&F brass chromium plated tubular towel rail 20mm dia ‘D’ Type 60cm long with brackets and fixing etc complete all as specified and directed by Engineer-in-Charge

Supply and fix in repairs vitreous China white squatting pan, Orissa pattern of size 580 X 440 mm width with integral foot rest set in cement concrete including flush pipe and connecting to trap / flushing cistren complete all as specified and directed. Make :- Cat Part No C0117 Of Parryware or Cat Part No 20042 of Hindware or equivalent in Cera

Supply and fix in repairs looking mirror of size 600 mm X450 mm all as directed. Make:- Cat part No C 8606 Of Parryware or equivalent in Jaquar / Cera

S&F PVC mirror cabinate Make : Parryware or equivalent as approved by GE.

S&F in repairs 32mm dia low density polyethyiene pipe (LDPE) of pressure rating 6kg/cm sqm fixed to complete wall / celing in floors etc complete all as specified and directed by Engineer-in-Charge

Supply and fix repairs PVC valveless, syphonic action type, flushing cistern,low level, all accesories all as directed. Make :- Sleek essence series of Hindware or Cat part No E8303 of Parryware of equivalent in Cera

S&F in repairs Brass chromium plated tiolet paper holder fixed with (CP) brass screws of approved quality etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 15 mm dia pillar tap, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe all as directed.Make:- Cat part No MOR 1010(Orintal series) of MARC or equivalent in PLUMBER, ESS-ESS

M&L for machine cut cudappa stone slab 20 to 25mm thick laid over and including 20mm thick cement screed in cement and sand mortar (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, making cutting for placing sink etc complete all as specified and directed by Engineer-in-Charge

Rouding to edged of stone slabs one edge, such as in steps, cooking platform, and other similar situtations etc complete all as specified and directed by Engineer-in-Charge

Material & labour 20mm thick pre-polished granite stone slab of approved shade and colour Jet Block/Telephone Black as in top table top of WHB Kitchen slab/platform steps gate pillars cills etc on vertical surfaces includig vertical projection full round moulding the edge laid over screed bed 15mm thick in cement and sand mortar (1:4) jointing, polishing in white cement and using marble dust with admixture of pigment to match the shade of granite and rubbing polish etc complete all as specified and directed by Engineer-in-Charge

Material and labour for IInd class hard wood plain fillets square, rectangular or triangular in section area exc 13 sqcm but n exc 25 sqcm clean sawn secured with nails or brads etc complete all as specified and directed by Engineer-in-Charge

Supply and fix continous (piano) hinges mild steel bright finish or electrogalvanised (with of flaps 30mm) etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 125mm long hasp and staple safety type aluminium anodised with mild steel hinges pin including bolt to hinge plate and fixed with screws etc complete all as specified and directed by Engineer-in-Charge

Supply and fix 125mm long aluminium anodised handles, cast type etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs prelaminated particle board 18/19 mm thick, interior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed with screw to timber frame work as in cupboards/shelves etc complete all as specified and directed by Engineer-in-Charge

Supply and fix boarding fixed with nails in any situation except flooring planned one side and edges tongned and grooved or rebated etc complete all as specified and directed by Engineer-in-Charge

Material and labour for IInd class hard wood plain fillets square, rectangular or triangular in section area exc 3 sqcm but n exc 6 sqcm clean sawn secured with nails or brads etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs sink with drainage board made out of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including cantilever bracket and connection union to pipe overall size 915mmx460mm and bowl size 410x330x160mm etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs sink made of stainless steel 0.63mm thick kitchen or laboratory with plugs,including bedding in cement mortar on to dwarf wall or including cantilever bracket and connection union to pipe overall size 495mmx420mm and bowl size 410x330x160mm etc complete all as specified and directed by Engineer-in-Charge

S&F in repairs kitchen plate rack 0.63mm made out of stainless steel sheet of size 910x780x250mm with seperators and 3 tier shelves with provision of 9 No hooks etc complete all as specified and directed by Engineer-in-Charge

Dismantling water tanks exceeding 250 litre and not exceeding 500 litre capacity etc complete all as specified and directed by Engineer-in-Charge

Dismantling water tanks exceeding 500 litre and not exceeding 1000 litre capacity complete all as specified and as directed.

S&F Rotational moulded polyethylene double layered water storage tanks of capacity 500 ltr (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part I etc complete all as specified and directed by Engineer-in-Charge

S&F Rotational moulded polyethylene double layered water storage tanks of capacity 1000 ltr (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part I etc complete all as specified and directed by Engineer-in-Charge

Material and labour machine pressed precast concrete interlocking paver block with glossy finish, any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade laid over and including 30 mm thick stone dust cushioning to the pattern etc complete all as specified and directed by Engineer-in-Charge

M&L for 3mm thick wall care putty etc complete all as specified and directed by Engineer-in-Charge

Taking down carefully aluminium point wiring (light, fan, bell, socket, power point etc.) with or without conduit, casing caping, along with all connected accessories such as ceiling rose, switches, sockets, switch boards, fan regulator etc complete all as specified and directed by Engineer-in-Charge

M & L for point wiring complete with 1.5 Sqmm single core multistranded copper conductor of 1100 volts grade PVC insulated and unsheathed FRLS cable drawn through and including PVC casing & capping with necessary accessories with Flush steel mounting boxes of mylanic series of Legrand and white plates with frame of myleic series of Legrand of suitable size required at site. housing of switches sockets / fan regulator etc. including 1.5 Sqmm single core solid multitranded copper conductor FRLS 1100 volts grade PVC insulated and unsheathed cable as earth continuity conductor to common earth & connecting to earth dolly for the following :- (Note :- The cost of Mudular mounting boxes and modular plates included in the quatated rates)

(a) One light point controlled by one, one way switch single pole.

(b) One Fan point controlled by one, one way switch single pole.

(c) One bell point controlled by one bell push on independent board.

(d) One 3 pin 5 Amps socket out let on independent board

(e) One 3 pin 5 Amps socket out let on Sameboard

All as per item No 120 here-in-before but with 2.5 Sqmm Copper conductor cable for one 3 pin, 15 Amps socket out let on independent board.

S & F 6 A one-way SP switch - 1 module of Make Legard Cat No: 6755 01 or equvalent in Simens / Carbtree all as specified and directed.

S & F 16 A one-way SP switch - 1 module of Make Legard Cat No: 6755 11 or equvalent in Simens / Carbtree all as specified and directed

S & F 6 A 3 pin universal socket 2 modules of Make Legard Cat No: 6755 50 or equvalent in Simens / Carbtree all as specified and directed.

S & F 6/16 A socket 3 Pin 2 modules module of Make Legard Cat No: 6755 55 or equvalent in Simens / Carbtree all as specified and directed.

S & F 6 A one-way SP bell push - 1 module SP switch - 1 module of Make Legard Cat No: 6755 04 or equvalent in Simens /Carbtree all as specified and directed.

S & F Fan regulator 100 W with 2 module of Make Legard Cat No: 6755 30 or equvalent in Simens /Carbtree all as specified and directed.

S&F bell, AC, 230 Volts, single pole all as specified and directed.Make: Anchor / Havells / Standard

S&F ceiling rose surface bakelite three terminal all as specified and directed. Make : Anchor/Havells/Standard

S&F Lamp holder Lamp holder with LED Lamp 07 Watt of Make Havells/CG/Wipro all as specified and directed.Make : Anchor/Havells/Standard

S & F in replacement double door Sheet metal enclosures factory made DBs 8 way ,240 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No: 5076 11 or equivalent in Simens/ Hager/ L & T

S & F in replacement double door Sheet metal enclosures factory made DBs 4 way , 415 volts ,protection class IP-42, suitable for fixing of MCBs, Isolators etc, confirming As per IEC 61439-3 ,Suitable for Flush Mounting and Surface Mounting, With 100 A Copper Busbar ,With Neutral bar, Earthbar and Cable ties for Cable management,Fully shrouded Neutral bars, Prefitted masking sheet complete all as specified and as directed. Make: Legrand ,Cat No:5076 70 or equivalent in Simens/ Hager/ L & T

S & F MCBs of the under mentioned type and rating and fixing in DBs (DBs measured and paid for separately) (Note :- Make of the isolator should be the same as that of DB) for the following :-

(a) MCB Single Pole of 240 volts 5-32 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4085-87 to 90,92,93,94,95 or equivalent in Simens/ Hager/ L & T

(b) MCB Single pole + Neutral 240 volts, 32 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-17 to 20 or equivalent in Simens/ Hager/ L & T

(c) MCB Triple pole + Neutral 415 Volts ,40 -63 Amps,10 KA Capacity, 'C' series of Make: Legrand ,Cat No: 4086-81 to 83 or equivalent in Simens/ Hager/ L & T

Taking down Existing tube light fitting & Supply & fix Endura LED Batten fitting 20 watt with minimum 2000 lumen output with 6500 K including connecting up with thre core twisted flexible copper conductor cable with suitable size from ceiling rose to fitting all as directed by the Engr-in-Charge.Make :- Jaguar ,Cat No. LGLZ01X020XCPhilips ,or eq in Philips,Cat No. BN108C LED 20S PSU CDL WH /Havells ,Cat No. ENDURALINEARNEOBS20WLED830SPCWH

Taking down Existing tube light fitting & Supply & fix Endura LED Batten fitting 10 watt with minimum 1000 lumen output with 6500 K including connecting up with thre core twisted flexible copper conductor cable with suitable size from ceiling rose to fitting all as directed by the Engr-in-Charge. Make :- Jaguar ,Cat No. LGLZ01X010XC/Havells Cat No ENDURALINEARNEOBS10WLED840SPCWH/Philips Cat No Astra Line Scene Switch 10 Watt/1000 Lumens

Taking down Existing tube light fitting & Supply and fix in replacement 40 Watt with minimum 3100 lumen output with 6500K LED edge - lit luninaire suitable for armstrong / grid ceiling complete with separate electronic driver all as specified and direcrted by Engineer-in-Charge. Jaguar Cat Part LSVRO1S0XC / Wipro Cat No.LC-30 551-XXX-57-G1 / Havells Cat No.ENDURASLIMPROPLUS2X2PLR28/36WLED857MOD

Taking out old building security light ( HPSV/Tube light fitting) & S & F LED bldg security light minimum 25 Watt with minimum 2500 lumens with 6500K and New generation energy saving & environmental friendly long life Versatile pressure die-cast aluminium roadway luminaire with high power LED as light source of capacity 25W LED 5000K of Make Jaguar Cat No.LTRUMP0025XC or Eq in / Havells Cat No. NDURAPEARLSL25WLED757SASYTOPCMP /Philips Cat No BRP020 LED HP/CW 240V25W /Wipro Cat No.LR02-291-XXX-57-XX

M & L for Earthing complete with galvanized steel earth plate electrode 60x60cm x 6.0 mm thick buried directly in ground ( earth pit not less than 2.25 mtr deep below ground level) with top edge of plate not less than 1.5 mtr below normal ground level connected to and including galvanised earth lead wire 4.0 mm dia,by means of nuts,bolts,checknuts and washers of galvanized iron including 15 mm bore GI pipe,medium grade up to 7.5 meters long all as shown in electrical plate No.3 of MES SSR part-I and testing on completion including excavation and earth work in any type of soil, PCC (1:3:6) type C1 chamber,precast RCC slab 50mm thick in cement concrete (1:2:4) type B1 reinforced with welded steel wire fabric or XPM,( weight not less than 4 Kg/Sqm), with cast iron frame, funnel with wire mesh,GI watering pipi 20 mm dia medium grade,test point and lugs complete. NOTE:-(i) Items includes the cost of 7.5 metre length GI pipe and earth lead for protection of earth lead.Any variation in length shall be adjusted through deviation order.(ii) On testing,if the earth resistance is not obtained,earthing will be regenerated at no extra cost till the desired earth resistance is obtained.

M&L in replacement for sub main wiring with two runs of PVC insulated and unsheathed FRLS cable 650/1100 Volts grade, conforming to IS-1536-1977 multi-stranded 4 Sqmm single core, copper conductor drawn through PVC Casing Caping and 2.5 Sqmm single core multistranded copper conductor FRLS PVC insulated and unsheathed cable 1100 volts grade, ISI marked as earth continuity wire complete all as specified and directed (Note : Two runs of conductor with one run of earth wire and PVC casing capping will be measured & paid as one unit)

Supply and fix in replacement industrial type switch socket for Geysers with 20 Amps MCB Make:- Iengard Cat No.6078 41 20 A SP complete or Eq in L & T /Hager

M & L for Supply,laying ,connecting ,testing and commissioning and jointing , LT underground cable in replacement ,1100 volts grade, XLPE insulated, armored with galvanized round steel wire or steel strip, electric power cables heavy duty, with multi stranded aluminum conductor, laid in ducts, fixed on poles/walls with proper size saddles and clamp complete all as specified and as directed by the Engineer-in-Charge of following Sizes :- (Make :- Polycab/Havells/ CCI)

(a) LT cable25 Sqmm 4 core.

Supply and fix heavy duty exhaust fan ,300 mm sweep,230 V,50 Hz with fixing of fan duly grouted in bolts and connecting with 3 core flexible copper cable of size 1.5 Sqmm all as directed including making holes /Addn/Altn to in wall / window of Make ; Havells ,Cat No Turbo force / Orient /CG

An amount of Rs 76,233.00 shall be deducted from BOQ on account of schedule of credit

M/S-B.R.SONAWANE

M/s AG PATHAN

MS. A.S. CONSTRUCTION

Ms. M.D. Auty

OM SAI ASSOCIATES

Smruti Construction