125/2024-25/

Amount

Safe loading, carriage including unloading and proper stacking of following materials from Central Store Barabanki / JE Store to site of work.

ST Pole 11 Meter Long

Pcc Pole 8.5 Meter Long

Top Channel

T-off Channel

Dropper Channel

11 KV DISC INSULATOR WITH FITTING

11 KV PIN INSULATOR polymeric

Stay Set Complete

ACSR Rabbit Conductor

Earthing Set

Loop Insulator

11 KV X-arm

Holding Clamp for xarm

M.S Angle Iron 65x65x6mm Bracing with 4 Clamp

3x300 XLPE 11 KV Cable

O/D 3x300 XLPE 11 KV Jointing

3x120 XLPE 11 KV Cable

O/D 3x120 XLPE 11 KV Jointing

250 Kva T/F

S/S Base Angle

3x120 Sqmm ABC

11 KV VCB I/C CTR 600/300/5A 350 MVA, 24 Volt

11 KV VCB For O/G CTR 200/100/5A

3 Phase DB BOX

Dragging of pole from JE Dump Store to site

Grouting of STP Pole

Erection of Stay set of 16x1800 mm rod duly painted with red oxide,anchor plate, thumble turn buckle and stay insulate etc. digging of pit of size of size 0.4x0.6x1.6 m for grouting 1:3:6 cement concrete, with stay of size 7/8 SWG, nuzzling & Grouting.

Installation of Mounting of Following capacity of Transformer including its connection between 11 KV and LT Line mounting provinding Crimping type Aluminium lugs of required size.( All the material except transformer will be arranged by the contractor)

Mounting of 250 KVA Tranformer

Stringing and sagging of 11 KV line with ACSR Rabbit Conductor including nuzzling binding and jumpering (Rabbit conductor will be provided by the department)

Errection of Substation type double pole with ST/PCC including mounting of Top Channal Dropper Channel, base angle with clamps with nut & bolt 33/11 KV line including grouting of support and plinthing 300 mm above ground level, fitting of 33/11 KV pin & Pin insulator. 1/6 of total lenght of poles will remain under the ground and planted on stone pad of Size 300x300x75 MM.

Errection of single PCC /ST Pole for Stringing and sagging of conductor 1/6 of total length of poles will remain under the ground and planted on stone pad of size 300x300x75 mm.

Stringing and sagging of 3x120 Sqmm ABC ABC Cable will be provided by the department)

Laying of 11 KV XLPE CABLE 3x300+3x120 Sq. MM (XLPE Cable will be provided by the department)

Earthing of pole with MS Earthing.

Concreating and pilinthing of ST& PCC Pole 18x24 CM.

Fabricate with hole suitable size in steel items, receive from central store light as top channel/dropper channel sub station base angle etc.

Provinding & Fixing of various type materials. All materials shall be supplied by the contractor.

Piercing Clamp

Dead End Clamp

Nut & Bolt

F-Bracket

Copper lead 70 sqmm for DB Box

CLAMP FOR TOP, T-OFF, DROP

DANGER BOARD

G.I. BARBED WIRE

GI Pipe 6" Dia

J-Hook

Wiremesh fencing of 11/0.4 KV substation shall be made rectangular off size as per site requirement not exceeding 3 meter fabrication 45x45x5mm angle. material shall be supplied by the contractor.

Construction of massionary type transformer plinth of Suitable size with brick ,cement, coarse sand , sand & brick ballast. Filling of sand in the hollow space , plastering , outer surface in ration 1:4:6 top of the plinth 4" thickness grouting of 2 nos MS Channel of size 100x50x2000 mm on the top of the plinth for placement of transformer . All material shall be supplied by the contractor.

Earthing of T/F Pipe type with 40 fit deep borring and providing GI Pipe 1.5" dia (60 fit GI Pipe) and GI strip 25x5 mmx6 meter long attached with clamps, L piece, nut & bolts and GI Pipe Cap. All material shall be supplied by the contractor.

Tailless Unit Complete

POOJA ENTERPRISES (BID ID -5009237)

Hindustan Electric Work (BID ID -5009681)