ADDITION/ALTERATION TO INTERNAL AND EXTERNAL DEFECTS AT 23 CG FLATS AT EMERAL FLATS THIRUMANGALAM CHENNAI UNDER GE(I) CG CHENNAI

Amount

Taking down cement plaster on brick or stone walls etc including raking out joints hacking for key, scrubbing down with water etc and removing rubbish off the premises, removal and depositing servicable materials where directed complete all as specified and as directed.

Material and labour for rendering 15 mm thick in cement mortar 1:6 on fair faces of brick wall or stone masnory , mixed with water proofing compound as per manufacturer’s instruction , finished even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately.

Material and labour for rendering 10 mm thick in cement mortar 1:4 on fair faces of brick wall or stone masnory , finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 5 mm thick in cement mortar 1:3 on ceiling other than fair faces of brick wall or stone masnory , finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound (ISI Marked) Make : Impermo/Roff/Cico

Demolition of reinforced cement concrete as in landings,chajjas,beams and other suspended work and removal of debris off the premises outside the MD land complete all as specified and as directed.

Material and labour for RCC (1:2:4) type B0 using 12.5 mm graded stone aggregate) as in repair of column,chajjas,cill,facia,parapet etc including necessary formwork complete all as specified and as directed.

Demolition of brick work or stone masonry built in cement mortar including all quions,arches,pillars etc but excluding ashlar facing dressed stone work and precast concrete articles and rubbish off the premises to a distance not exc 100m and depositing where directed and serviceable items taken as credit complete all as specified and as directed

Material and labour for Brick work with flyash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

Demolition of PCC in ground floors and pavings n exc 15 cm thickness(below or above ground level) complete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces of wall including pilasters and cornice etc and Distempering with 1st quality acrylic distemper(ready mixed) having VOC content less than 50gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and as directed.

Material and labour for Preparation of newly plastered surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc.

Material and labour for 25 mm thick Plain Cement Concrete type B 0, 1:2:4,(using 12.50 mm graded aggregate) as in roof padding and finished even & fair surfaces including necessary formwork complete all as specifed and as directed.

Applying evenly a tack coat of hot industrial bitumen 85/25 1.2kg/sqm including cleaning surfaces over bitumen primer @ 0.50 litre / Sqm complete all asspecified and as directed. Make of Bitumen:M/S STP Ltd.

Material and labour for APP based Polymeric water proofing membrane minimum weighing 3 Kg/sqm and minimum 3mm thick reinforced with polyster non woven fabric (weight not less than 150 gm/sqm) laid over roof surface with 100 mm over lap and including vertical surface upto required height and tucking into grooves and sealing complete with thermofusion and finished with one coat of hot blown bitumen 85/25 @ 1.2 Kg per sqm applied over water proofing membrane complete all as specified and directed. Make of APP Membrane:M/S Hyper plas by M/S IWL Ltd /M/S Shivam Tar products/M/S Multi plas by STP Texes Ltd.

Material and Labour for cutting out cracks to V section in existing roofs or terracing, cleaning out and filling solidly with a hot mixture of bitumen and clean dry sand 1:1 (by weight) complete all as specified and as directed , Make of Bitumen:M/S STP Ltd.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) including removing serviceable tiles to store and rubbish off the premises not exceeding 100 metre complete all as specified and as directed.

Material and labour for Non skid ceramic tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:6 , 20 mm thick complete all as specified and as directed.

Material and labour for Non skid ceramic tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in vertical surfaces such as skirting,Dado/Risers set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 , 10 mm thick complete all as specified and as directed.

Material and labour for Non skid coloured ceramic tiles ,Premium quality 7 to 8 mm thick (square/rectangular) area of each tile exc. 0.11 sqm but not exc. 0.18 sqm in floors etc., set & jointed in neat cement slurry & pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:4 , 20 mm thick complete all as specified and as directed.

Material and labour for Glazed ceramic coloured tiles , Premium quality in vertical surface such as skirting,Dado/Risers, area of each tile not exceeding 0.18 sqm ,(square/rectangular) 7mm/8mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing surface including screed bed in cement mortar 1:3 10 mm thick complete all as specified and as directed.

Taking down chowkats or frames with shutter of area not exc 1.5 sqm each (without taking off shutters from the frame) and removing from the site including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down chowkats or frames with shutter of area exc 1.5 sqm and not exc 4 sqm each (without taking off shutters from the frame) and removing from the site including making good the disturbed surface of wall etc to match with existing adjoining surfaces and taken as credit complete all as specified and as directed.

Taking down shutter of any description of area exceeding 1.0 Sqm but not exceeding 2.00 Sqm each and taken as credit complete all as specified and as directed.

Material and labour for preparation of old plastered surface of walls including pilasters and cornices etc and applying one coat of oil bound distemper over a coat of primer complete all as specified and directed.

Material and labour for 1mm thick Wall Care Putty including cleaning the wall surface with the help of sand paper, putty blade or wire brush and then apply 1st coat on moistened surface and after surface dried , rub gently with wet sponge, then allow the surface dry for 3 hours and similarly apply second coat and leave for 10-12 hours and finally rub with very fine emery paper to get glossy surface complete all as specified and as directed.note:Make of wall putty :Jk wall putty/Birla wall putty.

Material and labour for Preparation of old plastered wall surface and applying one coat of white wash complete all as specified and as directed..

Material and labour for Preparation of old plastered ceiling surface and applying one coat of white wash complete all as specified and as directed..

Material and labour for 20mm dia stainless steel decorative curtain rod fixing to all opening and joineries portion complete all as specified and as directed.

Material and labour for stainless steel decorative bracket with end holders complete all as specified and as directed.

Supply and fix Factory made Second class hard wood, 35 mm thick, plain framed panelled shutter (any numbers of panel) with panels of timber flat on both sides (feather edged) or 12 mm thick veneered particle board medium density with commercial face veneers fitted to chowkats or frames with rail and stile as per IS-1003(part-1)klin seasoned and chemically pressure treated complete all as specified and as directed.

Supply and fix Flush shutters 40 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides complete all as specified and as directed.

Material and labour for Second class hard wood plain, solid ,straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints etc complete all as specified and as directed.

Supply and fix Factory made Second class hard wood 35 mm thick glazed and skeleton shutters, open rebated and prepared to receive glass/ gauze etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc,sizes of members of shutters as specified in SSR part I, Section 8, clause 8.24 (a),fitted to chowkat complete all as specified and as directed.

Supply and fix Plain sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or beads in squares n exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Plain sheet glass 4.8 mm thick ordinary quality and glazing with oil putty or beads in squares exc 0.5 sqm in each pane complete all as specified and as directed.

Supply and fix Stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with Stainless steel wire staples including taking down old one and taken as credit complete all as specified and as directed.

Supply and fix Mild steel hold fast made out of flat iron conforming to Fe-290 Gde E-165 of size 25mm x 3 mm bent to shape required with splitting end and drilling holes for fixing nuts & bolts (including nuts & bolts) including treating the steel surfaces with tar or coal tar black paint and sanding neatly newly tarred surfaces with clean sharp sand complete all as specified and as directed.

Supply and fix Flush shutters 19 mm thick, factory made solid core construction, with particle board core & plywood face panels, commercial type on both sides complete all as specified and as directed.

Supply and fix 125mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 200mm long aluminium, anodised barrel tower bolts of extruded section complete all as specified and as directed.

Supply and fix 250mm long aluminium alloy anodised sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.

Supply and fix 50mm butt hinges medium weight, cold rolled mild teel complete all as specified and as directed.

Supply and fix 75mm butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix 100mm butt hinges medium weight, cold rolled mild steel complete all as specified and as directed.

Supply and fix 300mm ordinary mild steel rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

Supply and fix 100 mm long Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and as directed.

Supply and fix 150 mm long Extruded aluminium alloy handles, fabricated type,anodised complete all as specified and as directed.

Material and labour for preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Material and labour for preparation of old painted steel or iron surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

Supply anfd fix in repairs Vitreous china wash down water closet pan (pedestal pattern ), Floor mounted ,white with all fittings including fixing bolts but excluding flushing cistern and flush pipe and including connection to drain pipe and to flushing pipe etc and provision of plastic water closet seat, white, closed pattern with flat bottom, & cover & mild steel, chromium plated or aluminium hinging devices with including 'P' or 'S' trap complete all as specified and as directed .Cat.part.no:20044 of Hindware

Supply and fix in repairs PVC low level flushing cistern white 10 litres capacity syphonic action type with complete accessories including 32 mm dia CP flush pipe etc., fixed with inlet ball valve,float ,handle and necessary mild steel brackets and connecting to WC and water pipe lines complete all as specified and as directed. Cat.part.no:C8090 of Parryware

Supply and fix in repair vitreous china wash basin, white flat back size 630 x 450 mm including brackets, cutting for and pinning in ends of bracket or errecting stand including 32mm dia bore 1.5metre long LDPE waste pipe complete all as specified and as directed.

Supply and fix in repair stainless steel sink with draining board ,kitchen bowl size 410 mm x 330 mm x 160 mm and overall size of 915 mm x 460 mm made out of 1 mm thick steel with plug and washers and waste pipe including bedding in cement mortar on to dwarf wall including fixing cantilever cast iron brackets and connecting union to waste pipe etc., all as per manufacturer's instructions including 32mm dia bore 1.5m long LDPE waste pipe complete all as specified and as directed.

Supply and fix in repair 1000 litres capacity rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part-I ,ISI Marked including dismantling water tank and taken as credit complete all as specified and as directed.

Supply and fix in repairs Ball brass valve, high pressure with polythene float and fly nut screwed for iron pipe or brass ferrule of 20mm complete all as specified and as directed. .Make:Prayag/M/S Shakthi industries

Taking up or down old rusted steel water tubing 15 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse complete all as specified and as directed.

Taking up or down old rusted steel water tubing 20 mm bore with all fittings, concealed type including connection from wall/floor ceiling and separating serviceable pipes and setting aside for reuse complete all as specified and as directed.

Supply and fix 20 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16 & PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed Make:SFMC/Vectus

Supply and fix 25 mm outer dia 3-layer PP-R P o l y p r o p y l e n e random copolymer) concealed pipes SDR 7.4 & SDR 11 (PN 16& PN 10) UV stablized and a n t i m i c r o b i a l welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded p o l y p r o p y l e n e random fittings fixed complete to walls, ceilings or in floors etc. (ISI Marked) complete all as specified and as directed Make:SFMC/Vectus

Supply and fix in repair chromium plated fancy type 15mm dia bore Bib tap ,cast copper alloy with capstan head, with crutch or butterfly handles screwed down,screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make:Jaquar/Metro

Supply and fix in repair Fancy type chromium plated pillar taps, 15mm dia bore cast copper alloy with capstan heads, screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make:Jaquar/Metro

Supply and fix in repair Fancy type chromium plated Stop valves, 15mm dia bore cast copper alloy,screwed down,high pressure, with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed. Make:Jaquar/Metro

Supply and fix in repairs 15mm dia bore stop cock (fancy type), cast copper alloy chromium plated with long shank and cup(conclead type)screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make:Jaquar/Metro

Material and labour for 32mm dia waste fittings, brass CP for glazed ware sinks, basin etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed in repairs with 32 mm bore PVC low density polyethylene waste pipe complete all as specified and as directed.

Supply and fix in repairs PVC connection pipe 15mm dia with PTMT nuts at both ends of length 375mm long complete all as specified and as directed.

Material and labour for cutting holes into or through brick walls in cement mortar or lime mortar and stone walls built in lime mortar or walls of lime concrete exc 150 Sq.cm but n.exc 400 Sq.cm complete all as specified and as directed.

Supply and fix Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube as per specification & drawing as shown in SSR Part II complete all as specified and as directed.

Supply and fix Factory made solid panel PVC door shutter 30mm thick (style) Solid PVC Foam Profile with homogeneous fine cellular structure having smooth integral skin consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel and a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail Panelling to plain colour PVC sheet to be fitted in the MS frame welded sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement and fixing in the frame at site as per specification and drawing as shown in SSR Part II complete all as specified and as directed.

Material and labour for Preparation of old plasterd surface of wall including pilasters and cornice etc and apply two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade(Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10sqm over surfaces complete all as specified and as directed.

Demolition and breaking up drain pipes, 150 mm dia (PVC, salt glazed stone ware, AC or reinforced concrete) set in cement mortar including removal of debris off the premises not exceeding 100 meter complete all as specified and as directed.

Demolition and breaking up drain pipes, 200 mm dia (PVC, salt glazed stone ware, AC or reinforced concrete) set in cement mortar including removal of debris off the premises not exceeding 100 meter complete all as specified and as directed.

Material and labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes 150mm bore laid in trenches and jointed in cement mortar 1:1 on Concrete bed complete including testing etc and concrete bed to drain pipes of bore 150mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate and testing complete all as specified and as directed. Note:-(i)Excavation and earth work shall be measured and paid separately under relevent items . .(ii) Make of SGSW pipe:M/S TSL

Material and labour for Salt glazed stoneware (SGSW) grade 'A' drain pipes 200mm bore laid in trenches and jointed in cement mortar 1:1 on Concrete bed complete including testing etc and concrete bed to drain pipes of bore 200mm including packing under and haunching against the sides of pipes after they are laid and treated in cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate and testing complete all as specified and as directed. Note:-(i)Excavation and earth work shall be measured and paid separately under relevent items . .(ii) Make of SGSW pipe:M/S TSL

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth and getting out in soft/loose soil complete all as specifed and as directed.

Returning, filling in soil including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specifed and as directed.

Removing excavated soil to a distance exceeding 500 meter and not exceeding 1500 meter depositing where directed at a level not exceeding 1.5m above the starting point complete all as specifed and as directed.

Dismantling Rain water pipe and Sewage pipe line of any type and description including fittings and rubbish off the premises to a distance not exc 100m and depositing where directed and serviceable items taken as credit complete all as specified and as directed.

Supply and fix PVC (SWR) pipes of bore110mm single socketed in any length with rubber ring joints, laid in trenches or in floors/fixed in walls complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix PVC (SWR) pipes of bore 75 mm single socketed in any length with rubber ring joints, laid in trenches or in floors/fixed in walls complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 110 mm dia PVC (SWR) bends any radius fitted with oval access door complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 110 mm dia PVC (SWR) bends any radius complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 75 mm dia PVC (SWR) bends any radius fitted with oval access door complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 110 mm dia PVC (SWR) reducer any radius complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 110 mm dia PVC (SWR) junction single(singleT ) equal or unequal complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Supply and fix 75 mm dia PVC (SWR) vent cowl complete all as specified and as directed.Make:Finolex/Trubore/Supreme

Material and labour for Plain Cement Concrete 1:2:4 type B0 (using 12.50 mm graded aggregate) as in coping, benching to manholes and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work complete all as specifed and as directed. .

Material and labour for Mild steel TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as specified and as directed.

Material and labour for Precast cement concrete Type-B1(1:2:4 ) (using 20 mm graded stone aggregate) as in man hole covers/gully trap cover slab set in cement mortar 1:6 including necessary mouldings/form work complete all as specified and as directed.

Material and labour for preparation of old wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint over a coat of pink primer complete all as specified and as directed.

Taking down carefully point wiring with copper/aluminium conductor (light,fan, socket or power complete ) and fittings such as switches,ceiling roses,pendents,regulators,sockets,light fittings,calling bell etc and removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully submain wiring with aluminum conductor cable 4/6/2.5/1.5 Sqmm in PVC conduit complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Taking down carefully unserivce able TPN/SPN DB with MCB complete including making good the disturbed surface of wall / floor etcand removing material from site and taken as credit and making good the disturbed surface of wall/floor etc to match with the existing surfaces complete all as specified and as directed.

Material and labour for point wiring complete with 1.5 sqmm single core unsheathed PVC insulated cable 1100 V grade multistranded copper conductor in different colour code of ISI marked drawn through casing caping with accessories ISI marked including PVC insulated copper earth wire of size 1.5 sqmm stranded conductor as earth continuty conductor of same size with PVC rectangular board of size 4x7, 8x10, 10x12 for mounting swithces/ sockets for mounting switches/sockets and regulators etc complete all as specified and directed . Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (ii)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL

One light point controlled by one switch

One fan point controlled by one switch

Call bell points

Material and labour for Sub main wiring with two runs single core 6 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 6 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note: (ii)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL.(iii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iv) Three different colour cable shall be used for phase,neutral and earth. (v) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles.

Material and labour for Sub main wiring with two runs single core 4 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 4 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 15 Amp socket and DB to main switch box

Material and labour for Sub main wiring with two runs single core 2.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 2.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Material and labour for Sub main wiring with two runs single core 1.5 sqmm multi stranded copper conductor FRLS PVC insulated unsheathed cable 1100 volts grade and one run of 1.5 sqmm multi stranded PVC FRLS copper conductor cable as earth continuity conductor drawn in PVC Casing caping in surface/recessed as required etc complete all as specified and as directed. Note:. (i)Make of PVC cable : Finolex/ Polycab/RR Kabel Ltd/Anchor/HPL (ii) Make of PVC Casing Capping & PVC fitting/fixtures :Kalinga/Pesto Plast/Finolex (iii) Three different colour cable shall be used for phase, neutral and earth (iv) The PVC cable connections with MCBs or Busbar shall be done through appropriate size brass/copper thimbles. (v) To be measured for 5 Amp socket and DB to main switch box

Supply and fix Switch piano flush type single pole one way 5 Amp complete all as specified and as directed.

Supply and fix Switch piano flush type single pole one way 15 Amp complete all as specified and as directed.

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 Amp flush type universal complete all as specified and as directed.

Supply and fix Switch socket combination 2 in 1, 3 pin, 5 to 15 Amp flush type universal complete all as specified and as directed.

Supply and fix Ceiling rose, surface type, PVC of 25 x 50mm, two to three terminals AC 230 V complete all as specified and as directed.

Supply and fix bell push flush type single pole two way 5 Amp complete all as specified and as directed.

Supply and fix calling bell AC, 240 volts single phase complete all as specified and as directed. Make:- Bajaj/Phillips/HPL

Supply and fix Fan regulator step type, 120W complete all as specified and as directed. Make:- Legrand/Anchor/Havells

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps double door rated bus bar TPN 4 way complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCCB 160 Amps, 415 Volts, Rupturing capacity 36KA all as specified and directed complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB TP 63 Amps, 415 Volts, Rupturing capacity 16Ka all as specified and directed complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fixsheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 4 way Make:- C&S/HPL/Legrand

Supply and fix sheet metal enclosure for Board distribution double door with 200 Amps rated bus bar SPN 8 way Make:- C&S/HPL/Legrand

Supply and fix MCB SPN 5 to 30 Amps, Repturing capacity 10KA complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and fix MCB SP 5 to 16 Amps, Repturing capacity 10Ka complete all as specified and as directed. Make:- C&S/HPL/Legrand

Supply and Fix wall/surface mounted LED batten 20W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W with integrated sleek extruded aluminium housing with diffuser complete all as specified and as directed. Make : Havells cat part No VENUSNEOHE2X2PLR18-42WLED865MOD or equivalent in Philips/Cromtpon/surya/Bajaj

Supply and Fix wall/surface mounted LED batten 10W (or nearest higher Wattage) & luminous efficacy more than 100 lm/W with integrated sleek extruded aluminium housing with diffuser complete all as specified and as directed. Havells Cat part No ENDURALINEARNEOBS10WLED865SPCWH or equivalent in Philips/Cromtpon/surya/Bajaj

Material and labour for Earthing complete with galvanized steel earth plate electrode 600 x 600 x 6mm thick, burried directly in ground (earth pit not less than2.25 Metre, deep below ground level) with top edge of the plate not less than 1.5 meter below normal ground level connected to galvanized iron strip 32 x 6mm by means of bolts, nuts washers checknuts of galvanized or steel all as shown in electrical plate No 3 of SSR Part I connected to earthing test points all as specified or indicated including 25 Kgs of Bentonite powder and excavation and earth work, PCC 1:2:4 type 1 in chamber, RCC cover 40mm thick in 1:2:4, type B1 (20mm graded aggregate) with 8mm MS rod at 15cm in both ways hook, funnels with 40mm dia protection pipe and 20mm dia medium grade watering pipe, wiremesh and GI lugs, GI protection pipe and testing on completion complete all as specified and as directed

Material and labour for Earth continuity conductor or main earthling lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/ pipe or fixed to poles or any other indicated situation for loop eatthing etc as required 20x3mm copper strip complete all as specified and as directed

Supply and fix 5 Star rating ceiling fan 1200mm sweep suitable to work on single phase AC 230 Volts 50 Hz complete including connecting electrically to ceiling rose or connector block using PVC insulated sheathed 3 core cable 0.75sqmm flexible copper conductor including taking down old fans and removal to store complete all as specified and as directed. Make : Anchor/Havells/Crompton

Supply and fix heavy duty exhaust fans AC single phase 230/ 240 V of size 300 mm sweep with louver including taking down old fans and removal to store storeall as specified and directed. Make : Havells/Crompton/Almonard

kvs constructions

SREE VENKATESWARAS CONSTRUCTIONS

M/s.Sai Agency