SR/REPLACEMENT OF SVMH LIGHT WITH LED LIGHT FITTINGS OF EXTERNAL ELECTRIFICATION AT VSN, NAGPUR.

Amount

Taking out from Pole /trench /duct /floor /wall /roof /under road /drain or hardstanding etc, XLPE aluminium conductor cable of size 10/16 Sq mm 2 to 4 core, all as specified and directed.

Supply and laying LT UG XLPE insulated 1100 volt grade heavy duty cable multi stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel strip wire or tape and connecting up to the electrical system with suitable size of aluminium lugs of size 10 sq mm 2 core complete all as specified and directed.

Excavation in trenches in hard/dense soil not exceeding 1.5 meter wide and not exceeding 1.5M in depth for laying of cables and getting out of excavated material complete all as specified and directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick each, excavated soil in trenches after the cable / pipes have been laid and tested complete all as specified and directed.

Removing excavated soil to a distance not exceeding 50 meter and depositing where directed at a level not exceeding 1.50 meter above the starting point complete all as specified and directed.

Material and labour for sand cushioning below and around cable in trenches with rever sand all as specified

Supply and fixing burnt brick sub class 'B' designation for cable protection laid adjacent to each other perpendicular to the direction of cable in trenches complete all as specified and directed

M&L for cutting of PCC/Hard standing/WBM road not exceeding 20 cm in width not exceeding 30 cm in depth for passing of LT cable and making good of disturbed surface to match with the existing surfaces by using old and new material i.e bitumen/PCC (1:3:6) type C-1 complete all as specified and directed .

Supply and fixing GI pipe light grade with necessary fittings in floor /piller/fixed on pole of size 40 mm dia complete all as specified

Dismantling and Taking out old unserviceable wire and Supply and fix 2 core 2.5 sqmm PVC insulated PVC sheathed weather proof multistranded Copper conductor cable 1100 volts grade including laying from junction box to light fitting all as specified and directed.

Dismantling and Taking out old unserviceable cable junction boxes and Supply and fix thermoplastic cable junction boxes IP 55/IP 65 with metric knockout for cable entry with terminal of size 170x130x80 mm on pole with MS clamps, nut bolts, washers and glands suitable for 16 sq mm 04 core cable and all as specified and directed . Make Hansel, Neptune.

Dismantling and Taking out old unserviceable MH/SV lamp with holder and Supply and fixing on pole LED B22 Bulb Base Power Consumption: 20 W Cool Daylight (6500-7500K), Light Color: White 2000 Lumen, including suitable holder all as specified and directed.Make CG,Philips, Bajaj

Dismantling and Taking out old unserviceable flood light fitting and Supply, Installation, Testing and Commissioning of LED flood light fitting 250 watt light with a nominal system lumen output of 24200 lumens and a minimum system efficacy of 100 lumen/watt. The luminaire shall have rated system lifetime of 50,000 burning hours at L70. The luminaire should have cool white colour temperature (5700K) and a CRI>70. The luminaire shall meet IP65 rating with THD<20% & Pf>0.9. The luminaire housing should be made of pressure die cast aluminium. The total power consumption should not exceed 250W (including driver). Make :- CG Cat No LFLPI-250-CDL / 60,Philips, Bajaj

Dismantling and Taking out old unserviceable Post Top Light fittings and Supply and fixing in replacement for Post Top latern fitting 20 Watt with LED Decorative indirect posttop for garden,Gate,landscape lighting. IP 65 protection.Resistant to impact and corrosion. Glare-free and better uniformilty and complete all as directed. Make : CG Cat No LPTH-20-CDL,Philips, Bajaj

Dismantling and Taking out old unserviceable Garden/Pathway Light fittings and Supply, Installation, Testing and Commissioning of Integral LED Ground mounted Bollard Inverted pyramid tripod led bollard with soft 360 degree light with a system lumen output of 300 lumens and a minimum system efficency of 35 lm/W. The luminaire shall have a rated system lifetime of 25,000 buring hours at L70. The luminare should have a color temperature of 3000K and CRI>75. The luminaire shall meet IP65 & IK10 rating with THD < 20% and PF > 0.9. The luminaire housing should made of pressure die cast aluminium with polycarbonate diffuser. The power consumption should not exceed 8W/9W (including driver). Make:- CG Cat No.LBLSN-10-CDL ,Philips, Bajaj

Supply and fix bracket for street light fittings made out of 40 mm dia GI pipe of light grade 1.5 m long each bent to shape & size required & fixed to pole with and including flat iron clamps 02 Nos made out of 40 x 5 mm flat iron including GI Nuts, bolts and washers and painting of clamps and street light brackets with one coat of aluminium paint over a coat of red oxide primer and fittings bracket to street light fitting including taking down old unserviceable bracket of any shape and size all as specified and as directed.

Dismantling and Taking out old unserviceable street Light fittings and Supply, Installation, Testing and Commissioning of Integral LED street light luminarie 45 Watt die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Elecrochemically brightened and anodized aluminium reflector. Heat resistant toughened glass is provided with die cast aluminium frame. (IK 08) luminarie provided with a mounting bracket for aiming adjustment. Driver is provided with input voltage surge (10kV), open and short circuit protection. system wattage 45 W and power factor 0.90. Make CG LSTP-45-CDL,Philips, Bajaj

Dismantling and Taking out old unserviceable flood Light fittings and Supply, Installation, Testing and Commissioning of Integral LED flood light luminarie 150 Watt die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Elecrochemically brightened and anodized aluminium reflector. Heat resistant toughened glass is provided with die cast aluminium frame. (IK 08) luminarie provided with a mounting bracket for aiming adjustment. Driver is provided with input voltage surge (10kV), open and short circuit protection. system wattage 150 W and power factor 0.90. Make CG Cat No LFLN-150-CDL/60-M, Philips, Bajaj

Dismantling and Taking out old unserviceable flood Light fittings and Supply, Installation, Testing and Commissioning of Integral LED flood light luminarie 50 Watt die cast aluminium housing designed to act as heat sink for efficient dissipation of heat. Elecrochemically brightened and anodized aluminium reflector. Heat resistant toughened glass is provided with die cast aluminium frame. (IK 08) luminarie provided with a mounting bracket for aiming adjustment. Driver is provided with input voltage surge (10kV), open and short circuit protection. system wattage 50 W and power factor 0.90. Make CG Cat No LFL-50-CDL/60-M, Philips, Bajaj

Chinmaya Enteprises

M/S JAINENDRA KUMAR JAIN

Sharma Electrical and Services

SRI JD CORPORATION