Providing CC road with Culvert at Archedin Bus Stop to Pudhukadu (Special Fund 25-26)

Picking the existing surface 3 to 5 cm deep removal of picked up staff to the side berms and using the useful metal to the road hand packing to camber sectioning, levelling including labour charges for picking and other tools and plants etc., complete as per standard specifications. 404 of MORTH

Earthwork excavation for open excavation and depositing on Bank within initial lead of 10mt and initial lift of 2mt in hard stiff clay ,stiff black cotton hard red earth shales murrams gravel stoney earth and earth mixed with small size boulders and hard gravelly soil except rock etc., complete complying with standard specification.As per SS 20 B TNDSS NO 23&24 VI (S2 ),VII 9,10

Earthwork excavation for foundation and depositing on Bank within initial lead of 10mt and initial lift of 2mt in hard stiff clay ,stiff black cotton hard red earth shales murrams gravel stoney earth and earth mixed with small size boulders and hard gravelly soil except rock etc., complete complying with standard specification.As per SS 20 B TNDSS NO 23&24 VI (S2 ),VII 9,10

Plain Cement Concrete 1:4:8 mix(One cement,Four sand ,and Eight aggregate ) using 40mm Hard Broken Granite Stone (I.S.S ) metal from approved quarry including cost and conveyances of all materials to site and all handling charges at both ends cost of from work labour for mixing concrete trasporting laying curing of concrete and all other tools and plants including other incidencial charges such as bailing out of water ,maintaining protective bunds and coffer dams etc.,complete (for base course to body wall of the culvert and surface drain ) complying with standard specification.TNDSS NO 28 V,VI ( S2 ) V,VI (S5A) VII

Supplying and erecting of centering to sides and soffits including supports and strutting for drainages sides and culverts body wall sides using 90 cm x 60 cm and B.G.10 stiffenend with welded mild steel angles of size 25 mm x 25 mm x 3 mm for boarding laid over (silver oak joists) of size 10 cm x 6.50 cm spread at about 90 cm etc.,complete complying with standard specification. TNDSS NO ;30 & 86

Above 1 m Height

For Below 1 m Height

Plain Cement Concrete 1:2:4 Mix (one part cement, two part sand and four part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications.

Reinforced Cement Concrete 1:1½:3 Mix (One part cement, one and half part sand and three part of aggregate)using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing but excluding cost of reinforcement etc. Complete with std. Specifications. TNDSS NO: 30 V, VI (S3), VII-3.

Supplying and fabrication of steel and placing in position of TMT steel rods for RCC works as per design given including cost of steel and GI binding wire in all floors etc., complete complying with standard specification in TNDSS NO:97 V,VI (S6) VII (S6), VII-3.

Plain Cement Concrete 1:1½:3 Mix (one part cement, One and half part sand and three part of aggrigate) using 20mm size ISS HBG metal machine crushed from approved quarry including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete as per TNDSS NO: 28 & VI (S2) VI (S5A) VII standard specifications as directed by Engineer incharge.

Providing Bitumen Pad 12mm thick for Expansion joint including cost and conveyance of all other labour and material charges to site etc., complete.