Repair/Maint of boundary wall for Salaria Officers Enclave under GE (West) Delhi Cantt-10

Amount

Demolition of brickwork or stone/ boulder masonary built in cement mortar or cement lime mortar incl all quoins, arches, pillars, etc., but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick, block, RCC or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc., complete all as specified and directed. Note:- Taking down should be carrying out carefully to avoid damage to the plaster on opposite face of the wall and if damaged, contractor should carry out the necessary repair work on its own cost.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M&L for brickwork in masonry with sub class 'B' old size bricks, straight or curved on plan exc 6 m mean radius built in cement mortar 1:6, complete all as specified and directed.

All as per item No. 04, here-in-before, but except bricks complete all as specified and directed.

M&L for PCC 1:3:6, type C1 (using 20mm graded crushed stone aggregate) as in coping, cills, plinth courses, string courses, bed plates, Kerbs etc. and incl weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

Demolition of cement concrete(unreinforced) of any description and in any position not otherwise specifically provided for, complete all as specified and directed.

S&F of mild steel frame work like grill, security grills on top of walls, including embedding in concrete and screwing, etc., complete all as specified and directed.

Re-Fixing only existing old mild steel frame work like grill, security grill on top of walls, including embedding in concrete and screwing, etc., as obtained from srl item no. 03, here-in-before, after carrying out necessary repair like straightening etc complete all as specified and directed.

M&L Rendering 15 mm thick in CM 1:4 on brickwork or concrete surfaces, and finished even & smooth without using extra lime or cement complete all as specified and directed.

M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings .complete all as specified and directed. Note:- (Payment for providing grooves shall be made separately).

M&L for Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using aluminium strips , nailed to the under layer including embedding of aluminium strip, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

M&L for two coats of cement base paint over and incl priming plastered and other surfaces with a coat of alkali resistant priming paint and incl preparation of wall surfaces newly plastered, complete all as specified and directed.

M&L for a coat of cement base paint and incl preparation of old plastered wall surfaces, complete all as specified and directed.

S&F in repairs for PVC (SWR) pipes, single socketed in any length, with rubber ring joints, laid in trenches or in floors, of bore 110mm complete all as specified and directed.

M&L for preparation of new surfaces of steel and iron work of any description over 10 cm width or girth and applying two coats of synthetic anamel paint over and including one coat of red oxide primer complete all as specified and as directed.

M&L for preparation of old painted surfaces of steel and iron work of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M/S RK Builders (BID ID -3524235)

PG CONSTRUCTION AND COMPANY (BID ID -3519105)

Kunal Construction Co. (BID ID -3518353)

SHRI JI ENTERPRISES (BID ID -3519484)

HANUMAN BUILDERS (BID ID -3519033)