Loading
Loading…
Loading…
Tender Value
₹8.2 L
EMD Value
₹17,000
Closing Date
29 Jun 2026, 5:00 pm2d left
Similar tender results from the same govt authority in the past 3 years.
SM_TENDER CELL
GNIDA OFFICE
Providing and fixing of Open Gym Equipment in Village Tilpata Karanwas, Greater Noida.
2026_GNIDA_1161225_1
SM/(E-TENDER CELL)/2026/761 DATED-13.06.2026
Open Tender
Civil Works
180 days
GREATER NOIDA
REFER TENDER DOCUMENT
5 documents required · 5 mandatory
₹840
₹17,000
17 Jun 2026
17 Jun 2026
1 Jul 2026
17 Jun 2026
29 Jun 2026
17 Jun 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Sit Up Station: Providing, designing and fixing of double sit-up station of size 1500x1150x650mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe of 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum, thickness of plastic of 8mm, colorful and UV resistant and environmental friendly. | |||||
| 1.01 | The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipments on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal) and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). | - | Each | - | - |
| 2Air Walker: Providing, designing and fixing of Air-Walker of size 1100 x 550 x 1480mm fabricated with main post of 114mm dia and 2.5mm thick and other pipes of 10mm dia 2.5 mm thick made up of hot rolled tubular steel and hot dipped galvanized and powder coated 80-120 micron thick using akzo nobel or equivalent in desired shade and colour. All welding joints of pipe shall be robotic weded with joints paint to be applied al all the welding points prior of finising. All open ends of pipe to be closed with Gl/LLDPE caps. base plate cover shall be made virgin LLDPE plastic by roatational molding with minimum 8mm thickness. UV resistant and colour as approved by Engineer in Charge. ligh quality grip rubber should be used on handles. | |||||
| 2.01 | Foothold shall be made of nylon prevent alloy with rounded edges to impact and injury. Maintenance free bearings should be used in the equipments manufactured by reputed company duiy oil sealed and self lubricated to be approved by Engineer-in charge. the equipment shall be fitted with in-built limiters. The equipent shall be fixed on ground with concrete of minimum strength M-25 and JS haped welded bolts and when concrete is sec. fixing the equipment on to it and cover nuts and bolts with base plate cover, all complete as per directions and approval of Engineer-in Charge regarding material, shape of equipment. colour (of metal. seat and pedal). and fixing of Equipemnt etc (The cement Concrete and excavation work shall be paid
separately). | - | Each | - | - |
| 3Seated chest press: Providing, designing and fixing of seated chest press in a pair of size 1800 x 700 x 2000mm abricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off |removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact of injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and UV resistant and environmental friendly. | |||||
| 3.01 | Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/ILLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base plate and fixing of equipmernts etc. (the cement concrete and excavation work shall be paid separately). | - | Each | - | - |
| 4Twister: Providing, designing and fixing of twister of size 1700 x 1300 X 1300mm fabricated with main post of 114mm dia and 2 5mm thick and rest of the pipe 4Omm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with ioints scalloped as ecessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Foothold shall be made up of Nylon alloy with rounded edges to prevent any impact of injury and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and UV resistant and environmental friendly. | |||||
| 4.01 | Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in-charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by Gi/LLDPE caps for user safety. The equipmernt to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base pedal and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). | - | Each | - | - |
| 5Pull chair: Providing, designing and fixing of pull chair in a pair of size 2500 x 800 x 2000mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipe 40mm dia and 2.5mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber on top end. Pedals shall be made of Nylon alloy with rounded edges to prevent any impact of injury. Seat and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic of 8mm, colourful and UV resistant and environmental friendiy. | |||||
| 5.01 | Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in-charqe. Equipment to be fitted with inbuilt limiters to prevent unwanted movements. All open ends of pipe to be closed by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M-25 and J shape welded bolts and once the concrete is set, tix the equipment on to it and cover nuts and bolts with the base plate. All complete as per direction and approval of engineer-in-charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipments etc. (the cement concrete and excavation work shall be paid separately). | - | Each | - | - |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 4.12 MB
BOQ_2176429.xls
BOQ • 0.26 MB
PreQ_Tilapta_Karanwas.pdf
Tender Documents • 0.71 MB
Download all tender documents and submit your bid