18/2024-25 of SE GCC CBE

Amount

Supply of Rolled Steel Joist 200X100mm ISMB from approved vendors of Sail, Tata, Jindal, RINL, Essar Steel, Jindal Steel, JSW Steel, Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue.,

Supply of MS Channel 125x65 mm ISMC from approved vendors of Sail, Tata, Jindal, RINL, Essar Steel, Jindal Steel, JSW Steel, Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue.,

Supply of MS channel 100x50 mm ISMC from approved vendors of Sail, Tata, Jindal, RINL, Essar Steel, Jindal Steel, JSW Steel, Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue.,

Supply of MS plate various sizes (6,10) mm from approved vendors of Sail, Tata, Jindal, RINL, Essar Steel, Jindal Steel, JSW Steel, Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue.,

Supply of MS flat 65x10 mm from approved vendors of Sail, Tata, Jindal, RINL, Essar Steel, Jindal Steel, JSW Steel, Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue

Supply of MS flat 50x8 mm from approved vendors of Sail, Tata, Jindal, RINL, Essar Steel, Jindal Steel, JSW Steel, Tulsyan and Prakash Ferrous Industries industries PVT Ltd and Nobel as per IS 2062 and latest issue.,

Supply of Earth Spikes by using 40mm M.S. Rod & GI Earth pipe at a height of 3mts,MS Angle, Bolt , Nut with washer (40mm Dia, 3m length)

Supply of materials for earth pit of 115 mm dia to a depth of 6 mtrs. including cost of materials for earth electrode using M.S.rod 40 mm dia ,MS Angle , red soil and bentonite powder of 20 Kg and other sundries as per approved drawing . Identification board of size 300 X 150 mm 14 SWG, GI Bolt & Nut as directed by the field Engineer

Supply of M8, M9, M10, M12 & M16 full thread GI bolt, nuts & GI washer of various size with IS Grade for erection of insulator or any other purpose wherever required and as directed by the field Engineer.

Supply of `B` Class GI pipe for extension of tandum /down pipe for AB Switches and for any other work as required and as directed by field Engineer - 40 mm dia

Supply of Tension fitting Clamp - 6 bolted for Zebra including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of switch end clamp for Panther including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of switch end clamp for zebra including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of switch end clamp for 3" bus including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of 'T' clamp for 3" Bus to Zebra including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of 'T' Clamp for Zebra to Zebra including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of Expansion camp for 3"Busbar including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of PG Clamp for Zebra including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of Anchor Shackle F.S (Forged Steel) with 20mm Bolt & Nut with SS R-Clip including IS grade hardwares as per latest IS Code and approved GCC/CBE Specification.

Supply of reputed make long shackle 6lever Navtal lock with triplicate keys for AB switches and for any other purpose including the cost of ring and key token as directed by the field Engineer.

Supply of flexible copper tape/rope for interlinking panel earthing and for any other purpose, on any sizes, including the cost of copper lugs at both ends as directed by the field Engineer

Supply of enamael Paint including cost of paint, brush and consumables etc.,

Supply of LC/ Key board of size 4x3 feet out of 75x 25 mm Alu. frame embedded with 12 mm pre laminated wood particle board using screw on rear 2 Nos plain glass of 5 mm thick fixed with metal roller moving on Alu.channel should be provided on front with locking arrangements. LG glass piece should be fastened on the glass shutters for opening and closing wall clamp made out of 6mm plate should be provided on as per drawing along with hook for keys with token and as directed by the field Engineer including cost of all materials.

Labour, Machineries, consumables for fabrication of structures of Heavy section without length wise welded joints (Sectional weight 14Kg/Mtr and above) (Electricity supply will be brone by department) + 40% for Nilgiri district as per the drawing issued by field engineer

Labour, Machineries, consumables for fabrication of structures of Light section with joints wherever necessary (sectional weight below 14Kg/Mtr) (Electricity supply will be brone by department) + 40% for Nilgiri district as per the drawing issued by field engineer

Labour charges for erection of structure as per the drawing issued by field engineer - Erection Heavy section (sectional weight 14Kg/m and above) + 40% for Nilgiri district as per the drawing issued by field engineer

Labour charges for erection of structure as per the drawing issued by field engineer- Erection of Light section (sectional weight below 14Kg/m) + 40% for Nilgiri district as per the drawing issued by field engineer

Labour charges for erection of structure as per the drawing issued by field engineer - Erection of Light section (sectional weight below 14Kg/m) + 40% for Nilgiri district & Under LC + 20%

Erection of GI/MS pipe for extension of tandum /down pipe for AB Switches and for any other work as required by and as directed by field Engineer + 40% for Nilgiri district

Fixing of flexible copper tape/rope for interlinking panel earthing and for any other purpose as directed by the field Engineer (+ 40% for Nilgiri district )

Labour for Dismantling of single pole stack up right, under hang or suspension. with provision of hardwares,etc. 110 KV side (+ 40% for Nilgiri district ) Under LC

Labour for erection of single pole stack up right, under hang or suspension. with provision of hardwares,etc. 110 KV side (+ 40% for Nilgiri district ) Under LC

Labour for hot dip galvanising mild steel materials wherever necessary as directed by the field Engineer

Erection of strung bus Labour for strining of strung bus including hoisting of insulator and erection of eye bolt and hardware fittings 110KV Single Zebra conductor (1 span 3 run)

Labour for erection of bus bar Without making bends with appropriate machineries and consumables Using 75mm IPS Aluminium tube (+ 40% for Nilgiri district )

Labour for erection of bus bar Without making bends with appropriate machineries and consumables Using 75mm IPS Aluminium tube(+ 40% for Nilgiri district ) ( Under LC + 20%)

Labour charges for Dismandling of jumpers and droppers Upto height of 6 mts to 10 mts from ground level ( under LC) & + 40% for Nilgiri district

Labour Charges for Providing jumpers Upto height of 6mts from ground level

Labour Charges for Providing Jumpers Upto height of 6mts to 10mts from ground level

Labour Charges for Providing Jumpers Upto height of 6mts to 10mts from ground level ( Under LC +20%)

Labour for erection of Isolator / AB Switches, including erection of insulators, alignment works with provision of hardwares,etc. - with earth hand operated 110KV

Labour for erection of Isolator / AB Switches, including erection of insulators, alignment works with provision of hardwares,etc. - without earth hand operated 110KV

Labour machineries, consumables for erection of earth mat (Electricity supply will be borne by department)

Labour machineries, consumables for earth raisers for equipments and structures (Electricity supply will be borne by department)

Labour machineries, consumables For fabrication & erection of earth spikes without Materials including sharpening of Top portion & Galvanising, welding & Clipping the earthwire to earthmat / earthpit(Electricity supply will be borne by department)

Labour for Providing earth pit of 115 mm dia to a depth of 6 mtrs including fabrication of earth electrode using M.S.rod 40 mm dia, MS Angle & insert electrode in to the bore and refilling with red soil and bentonite powder of 20 Kg and Cement Collars and other sundries. Identification board of size 300 X 150 mm 14 SWG. lettering and 12 mm M.S.Round rod with suitable bolt to be fixed in the board and anti corrocive black paint should be painted top of the earth rod & its holding portion as directed by the field Engineer

Labour for excavation & refilling of avg depth of 0.8m x 0.3m for earth mat (Normal Soil )

Labour for excavation & refilling of avg depth of 0.8m x 0.3m for earth mat (Hard Soil)

Labour charges for One coats of reflecting painting of buttom shoe of various structures.

Labour charges for drawing layout and writing details/ Vinyl Printing in LC/ Key board including cost of enamel paint (Dulex, Asian, Berger preferred) and Other consumables as directed by the field Engineer.

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation - Non-Fragile Materials -110 KV Isolators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation - Non-Fragile Materials -Cables/Conductors including cutting and rewinding

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation - Non-Fragile Materials -Busbars

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation - Fragile Materials -110 KV Insulators

Labour for the loading/unloading/shifting of Department materials at stores or site by the Contractor without using Board's crane for one operation - Fragile Materials -11 KV Disc insulators

Conveyance charges for transporting by road in plains iron & steels ( 40 Km Hills )

Conveyance charges for transporting by road in plains equipments, panel & insulators

SGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

CGST to be quoted in Percentage (value alone)Ex. 9%, it should be entered as 9 only

Inter-state GST @18% for other than Tamil Nadu supplier. If the contractor is within Tamil Nadu may be quoted as "0" only