REPIAR TO CHAIN LINK BARBED WIRE FENCING APPROACH PATH DRAIN BDY WALL AND ALLIED WORKS AT TAMULPUR AND DARRANGA UNDER GE RANGIA

Amount

Dismantling fencing of any type / description, ie Chain Link / barbed wire Fencing, Cattle Fencing, security fencing etc., complete all as specified and as directed.

Dismantling / taking out (up-rooting) of RCC/Steel Fencing Posts or Struts of any Section, embedded in concrete including embedded portion (and the concrete if required), complete all as specified and as directed.

Excavation in existing or new post hole of required size each n.exc 0.5 cum to accommodate Steel/RCC fencing post by trimming/excavation getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exc. 25 cm, complete all as directed by Engr-in- Charge

M&L for cement concrete 1:3:6 Type C2 with using 40 mm graded stone aggregates, in foundation filling and mass concrete, complete all as specified and as directed by Engr-in-Charge.

S&F mild steel works as in posts and struts in fencing including cuttings top to shape as directed, drilling holes, notching for wires, etc, flat iron fillets for securing wire mesh including necessary bending, drilling, bolting, welding or riveting etc and similar work conforming to Fe-290 Gde E-165.

Supply Only Galvanised Iron Chain Link Fencing 100x100mm Mesh (Diamond Shape) with 4.0mm dia wire mesh, complete all as specified and as directed.

Fixing only chainlink fencing incl line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc incl provision of binding wire complete all as specified and directed.

S&F, galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 100mm specing and straing and fixing to any type of std. rail, straing bolts, incl securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pin, etc complete all as specified and directed incl taking down of old damaged one. (Each line wire to be measured)

S&F Mild Steel Round Bar 10mm dia (Gde - I, IS-432) as in Stiffener to Chain Link Fencing including necessary cutting, bending, hoocking, bindingetc., complete all as specified and as directed. (Gde.E-250quality-A or Fe 290 Gde - E-165)

S&F Mild steel screw bolts of 11 to 15 mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces exceeding 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

M&L for preparation of new steel surfaces not exc. 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and as directed by Engr-in-Charge.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

M&L for glossy finish Chequered Cement Concrete Tiles 300x300x25mm thick pre printed colour or glossy finished tiles, Set and jointed in neat cement slurry with grey cement and pigment over and including screed bed 15mm thick in cement mortar 1:6 as in path, completed all as specified and as directed.

M&L for Machine pressed precast coloured concrete interlocking paver block with gray cement and pigment any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 Grade.

M&L sand filling under floors or in foundation including watering and consolidation.

M&L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and levelled layers not exceeding 15 cm thick, watered and rammed to a true surface.

M&L 75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggre-gate) laid in panels in footpath / pavings/plinth protections, finished even and smooth w/o using extra cement.

M&L for 100 mm thick PCC 1:4:8, type D2 with using 40 mm graded stone aggregate as in hard standing laid in panels finished fair and even complete all as specified and as directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness,complete all as specified and as directed.

Demolition of brick work built in cement mortar, complete all as per specified and as directed by Engg-in-charge.

Brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6, complete all as specified and as directed.

Brick work with sub-class `B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4, complete all as specified and directed.

M & L for cleaning of septic tanks of any capacity along with removing of sludges etc and carrying to a distance exc. 100 meters but n.exc 250 meters and depositing in ditches including necessary excavation and earth work in soft/loose soil for making ditches and refilling the ditches after the sludge’s are deposited with spreading and leveling of excavated soils in the ditches over the sludge, removing surplus soils to a distance n.exc 50m and supply and sprinkling bleaching powder over the area of ditches with one meter around complete all as specified and directed. Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ.

M/S KIRAN ENTERPRISE

MUKUL CHOUDHURY

M/S S.S. Construction

M/s. G. K. Traders

M/s Kajal Das

Shiva Builders