Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹44.3 LAdmitted-Finance | ₹44.3 L | L1 | Admitted-Finance |
| 2 | L2₹45.5 LAdmitted-Finance | ₹45.5 L | L2 | Admitted-Finance |
| 3 | L3₹45.8 LAdmitted-Finance | ₹45.8 L | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S Yashpaul Gulati L2 | M/s Bansi Lal L3 | Manjeet Singh Contractor L1 |
|---|---|---|---|---|---|---|
| 1.00 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed. | 54.5 | Cum | 500 ₹27,250 | 500 ₹27,250 | 463 ₹25,233.50 |
| 2.00 | M&L for previously primed new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed. | 57 | Sqm | 70 ₹3,990 | 70 ₹3,990 | 65 ₹3,705 |
| 3.00 | M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed. | 85 | Sqm | 380 ₹32,300 | 370 ₹31,450 | 370 ₹31,450 |
| 4.00 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. | 700 | Sqm | 50 ₹35,000 | 50 ₹35,000 | 46 ₹32,200 |
| 5.00 | M&L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed. | 416 | Sqm | 1,190 ₹5.0 L | 1,160 ₹4.8 L | 1,173 ₹4.9 L |
| 6.00 | M&L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and including backing with 10 mm thick in cement mortar 1:4 complete all as specified and as directed. | 20 | Sqm | 1,300 ₹26,000 | 1,300 ₹26,000 | 1,173 ₹23,460 |
| 7.00 | M&L for 450mmX 350mm & 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in CM 1:4 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with cement mortar bedding and removing off the premises complete all as specified and directed. | 350 | Sqm | 1,150 ₹4.0 L | 1,250 ₹4.4 L | 1,173 ₹4.1 L |
| 8.00 | S&F granite( of any type) stone slab of 20mm thick laid over and including 15mm thick cement screed bed in cement mortar 1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. | 12 | Sqm | 2,160 ₹25,920 | 2,080 ₹24,960 | 2,081 ₹24,972 |
| 9.00 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and directed. | 6.2 | Ten Sqm | 500 ₹3,100 | 500 ₹3,100 | 463 ₹2,870.60 |
| 10.00 | M&L for machine cut kota stone slab flooring 18-20 mm thick over and incuding 15 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specified and directed. | 35 | Sqm | 1,200 ₹42,000 | 1,270 ₹44,450 | 1,225 ₹42,875 |
Updated dates
Tender Value
₹44.6 L
EMD Value
₹90,000
Closing Date
22 May 2026, 6:00 pmClosed
GE (WEST) FEROZPUR CANTT
GE (WEST) FEROZPUR CANTT
SPECIAL REPAIR TO BUILDING NO P16 (01 TO 08) OR MD ACCN AT FAFA II AND OTHER SANCTIONED WORKS UNDER AGE BR I OF GE (WEST) FEROZEPUR CANTT
2026_MES_757098_2
802025/GE-88/E8
Open Tender
Civil Works
180 days
FEROZPUR CANTT
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE (WEST) FEROZPUR CANTT
₹90,000
Yes
2 Jun 2026
2 May 2026
29 May 2026
2 May 2026
22 May 2026
9 May 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Demolition of unreinforced cement concrete in ground floors and paving n.exc 15 cm thickness below or above ground level complete all as specified and directed. | 54.5 | Cum | - | - |
| 2 | M&L for previously primed new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint on steel surfaces complete all as specified and directed. | 57 | Sqm | - | - |
| 3 | M&L 75 mm thick cement concrete 1:3:6, type C-2 (using 20mm graded stone aggregate) as in plinth protection, shall be laid in 1:20 slope. The concrete shall be laid at a stretch not exceeding 3-meter in length. Joint gap between the adjoining slab, at corners and at junctions of wall shall not exceed 10mm in width and shall be sealed with mastic filling i.e. one part of bitumen of grade 85/25 garde mixed with 3 part of sand. Top surface of concrete shall be finished even and smooth without using extra cement. Joints shall be provided at not more than 3-meter interval at corner and junction walls complete all as specified and directed. | 85 | Sqm | - | - |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises complete all as specified and directed. | 700 | Sqm | - | - |
| 5 | M&L Non-skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour over and including a screed layer of 15 mm thick in cement mortar 1:6 complete all as specified and as directed. | 416 | Sqm | - | - |
| 6 | M&L for non skid coloured ceramic tiles of 7 to 8 mm thick , area of each tile exceeding 0.11 Sqm but not exceeding 0.18 Sq m as in skerting/dado set and jointed in neat cement slurry and pointed in white cement mixed with colour pigment to match and including backing with 10 mm thick in cement mortar 1:4 complete all as specified and as directed. | 20 | Sqm | - | - |
| 7 | M&L for 450mmX 350mm & 7mm thick glazed coloured (Digital colour) ceramic tiles on vertical surface of such as skirting, dados and risers to steps etc., including 10mm thick rendering in CM 1:4 on brick or concrete surface finished rough to received dado/ skirting, set and jointed in neat cement slurry and pointed in white/coloured cement to match the shade with cement mortar bedding and removing off the premises complete all as specified and directed. | 350 | Sqm | - | - |
| 8 | S&F granite( of any type) stone slab of 20mm thick laid over and including 15mm thick cement screed bed in cement mortar 1:6 machine cut,size and jointed over grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed. | 12 | Sqm | - | - |
| 9 | Dismantling of stone slabs and tiles of any description or thickness in floors aprons laid bedded and pointed in any mortar complete all as specified and directed. | 6.2 | Ten Sqm | - | - |
| 10 | M&L for machine cut kota stone slab flooring 18-20 mm thick over and incuding 15 mm thick cement screed (1:6) base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polish complete all as specified and directed. | 35 | Sqm | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.22 MB
Tender88.pdf
Tender Documents • 1.28 MB
BOQ_854907.xls
BOQ • 0.53 MB
Download all tender documents and submit your bid