Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Infra Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹81.7 LAccepted-AOC FLAT NO 002 MAHAVIR VILLA CHS LTD PLOT NO 259 SECTOR 21 NERUL EAST NAVI MUMBAI 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹88.6 L+₹5.9 L (7.18%)Rejected-Finance A 303 SHREE KRISHNA COMPLEX CO OP HSG SOC LTD WESTERN EXPRESS HIGHWAY OPP NATIONAL PARK BORIVALI E MUMBAI 400066 | MUMBAI SUBURBAN | MAHARASHTRA | 400066 | L2 | Rejected-Finance Other than being lowest | |
| 3 | L3₹89.8 L+₹7.2 L (8.72%)Rejected-Finance | L3 | Rejected-Finance Other than being lowest | |
| 4 | L4₹99.0 L+₹16.4 L (19.8%)Rejected-Finance 302 SIDDHIVINAYAK APPT A WING MUMBAI K K MARG JACOB CIRCLE MUMBAI CITY MAHARASHTRA 400 011 | MUMBAI | MAHARASHTRA | 400011 | L4 | Rejected-Finance Other than being lowest | |
| 5 | L5₹99.2 L+₹16.6 L (20.1%)Rejected-Finance FLAT NO B 401 4TH FLOOR NAVADURGA CO OP HSG SOCIETY LTD PLOT NO 7 SECTOR 19A NERUR EAST NAVI MUMBAI THANE MAHARASHTRA 400 706 | NAVI MUMBAI | THANE | MAHARASHTRA | 400706 | L5 | Rejected-Finance Other than being lowest |
Tender Value
Refer Docs
EMD Value
₹2.1 L
Closing Date
16 Mar 2024, 6:50 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE (NW) Mumbai
Commander Works Engineer NW Dr Homi Bhabha Road Navy Nagar Colaba Mumbai 05
COMPREHENSIVE REPAIR OF HARD STANDING SS RAILING, SS GUARD BARS, WOODEN COPING AT DESTROYED WHARF WET BASIN AND KL BERTH AREA NAVAL DOCKYARD UNDER GE (NW) KUNJALI, COLABA, MUMBAI
2024_MES_642026_1
8305/CWE (NW) Mumbai/E8
Open Tender
Civil Works
Item Rate
270 days
GE (NW) Kunjali
Class B
Category a (i)
7 documents required · 7 mandatory
₹1,000
Yes
GE (NW) Kunjali
₹2.1 L
Yes
30 Mar 2024
12 Feb 2024
19 Mar 2024
12 Feb 2024
16 Mar 2024
4 Mar 2024
12 Feb 2024 - 2 Mar 2024
Amount
Taking down cement plaster of any description on brick or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and removing debris outside MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Material and labour for preparing concrete surface with wire brush to remove all dirt, dust, etc. aroung edges of Dock walls, jetties, corners, grooves, steps, piers and other marine structure, applying epoxy coat as bonding agent Nitobond for bonding between old and new surfaces and applying microconcrete including all lifts, shuttering as required as per site condition complete as per manufacturers instructions and complete all as specified and directed by the Engr-in- Charge.
Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removal of debris out of MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Demolition of RCC of any description and in any position not otherwise specifically provided for including reinforcement cut as required to facilitate demolition and separating, scraping and cleaning of reinforcement and removing debris outside MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforcement using wire brush and cleaning the exposed steel reinforced bar and washing the old re-bar with clean water for removing all rusts , applying rust remover over the cleaned re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, applying one coat of polymer modified bond coat on affected concrete surfaces and finally providing 40mm thick polymer plaster (1:5:15, cement, sand, polymer) and finally finishing the surface complete all as specified and directed by Engr-in-charge. Note :-New reinforcement shall be measured and paid separately.
Material & labour for taking down, chipping and removing the loose, spailt, damaged cement concrete, cement mortor surfaces of RCC columns, beams, walls, chajjah etc and exposing the reinforcement using wire brush and cleaning the exposed steel reinforced bar and washing the old re-bar with clean water for removing all rusts , applying rust remover over the cleaned re-bar surfaces, fixing new reinforcement for strengthening the members as required, applying two coats of epoxy zinc primer on new and old steel surfaces, applying one coat of polymer modified bond coat on affected concrete surfaces and finally covering with Microconcrete of not less than 40mm including necessary formwork and finally finishing the surface complete all as specified and directed by Engr-in-charge. Note :-New reinforcement , microconcrete and form work shall be measured and paid separately.
Material & labour for cleaning the surface of the stone/concrete in jetty , dock,retaining wall, piers of jetty and bottom portion of deck slab etc above sea with mechanical grinder and specialized water misting techniques using water jet with a fine nozzle sprinkling system calibrated to spray a fine mist along the stone/concrete surface and removing all sea vegetation complete all as specified and directed by Engineer in charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Material and labour for applying two coats of anti carbonation paint over a coat of primer over vertical concrete surface in jetty/dry dock above sea level complete all as specified and directed by Engr-in-charge. Note:- Quoted rate shall be inclusive of scaffolding or alternative way of carrying out the work with proper safety instruction required at site.
Supply only ready mix microconcrete mixture complete all as specified and directed by the Engr-in- Charge.
Supply & fixing welded steel wire fabric, cut to length, fixed to steel members/reinforcement steel of weight n. exc. 4 Kg per Sqm complete all as specified and directed by the Engr-in- Charge.
Material and labour for formwork to sides and soffits of floor or roof beams, haunchings, girders, bressummers, lintels cantilevers, shelves including supt-ports, overhangs, etc. also splays between floors and beams, etc. for rough finished surface of concrete flat complete all as specified and directed by the Engr-in- Charge.
Material and labour for formwork to sides of pillars, posts, struts, piers, columns and stanchions square, rectanguar or polygonal for rough finished surface of concrete flat complete all as specified and directed by the Engr-in- Charge.
Material and labour for TMT bars 10 mm dia and over cut to length, bent to shape required, including cranking, bending, spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with the clips complete all as specified and directed by the Engr-in- Charge.
-Ditto- all as per item No 13.00 above but 8mm dia and over upto and including 10mm dia in stirrups, spacers and binders complete all as specified and directed by the Engr-in- Charge.
Material & labour for errection MS tubular double scaffolding (H frame) upto height of 30m with necessary brazing, provision of necessary safety equipment to the skilled workers to carry out the work and covering with green cloths for carring out external face work of walls & dismantling and removing the scaffolding complete all as specified and directed by Engr-in-charge.
Material and labour for ready mix cement concrete in Pavement/Hard standing (PQC) M-40 mixed with (admixture, synthetic & fibre) in field using minimum 400 Kg of cement per cubic metre laid in bays or as directed with and including steel formwork to sides of concrete spread, compacted and finished in a continuous operation complete all as specified and directed by Engr-in-charge.
Material and labour for precast RCC 1:2:4 type B 1 using 20mm graded crushed stone aggregate as in cover slabs and similar articles with plain fair faces including chamfers, weathering, throating etc and setting in cement mortar (1:4) with joints to matchcomplete all as specified and directed by the Engr-in- Charge. Note - Reinforcement shall be measured and paid separetly.
Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) mixed with integral water proofing compound in the proportion as mentioned in manufacturer's instructions and finished even and fair complete all as specified and directed by Engr-in-charge. Note-Water proofing compound shall be measured and paid separately.
Material & labour for preparation of new plastered surfaces of wal and applying two coats of Oil emulsion distemper over a coat wall care putty of 3mm thick and alkali resistance primer complete all as specified and directed by Engr-in-charge.
Material & labour for complete removal of existing treatment on wall surfaces and applying a coat of wall care putty 3mm thick and applying two coats of oil bond distemper over a coat of alkali resistance primer complete all as specified and directed by Engr-in-charge.
Material & labour for preparation of new plastered surfacesof ceiling and applying three coats of white wash complete all as specified and directed by Engr-in-charge.
Material & labour for rendering 20mm thick polymer modified mortar in cemet mortar (1:3) with graded quartz sand with additive Monolith - PMM 15% by weight of cement in one coat with and including curing as per manufacturer's instructions complete all as specified and directed by Engineer-in-Charge.
Material & labour for preparation of new plastered wall surfaces and applying two coats of 100% acrylic, weather resistant emulson (100% acrylic) over a coat of self primer complete all as specified and directed by Engr-in-charge.
Material & labour for complete removal of old decorated surface of wall and applying two coats of 100% acrylic, weather resistant emulson (100% acrylic) over a coat of self primer complete all as specified and directed by Engr-in-charge.
Material & labour for epoxy base joint filler paint on external surfaces of walls/floor to fill the cracks with and including resin and hardner in proportion as per manufacturers instructions complete all as specified and directed by Engr-in-charge.
Material & labour for applying thermoplastic paint in letter writing, Nos, Dashes, Arrow etc all as per manufacturer's instruction and complete all as specified and directed by Engr-in-charge.
Material & labour for preparation of old steel surfaces exc 10 cm width or girth and applying two coats of epoxy paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-charge.
Material & labour for preparation and applying two coat of floor paint complete all as specified and directed by Engr-in-charge.
Dismantling wrought iron or mild steel work of any description not otherwise provided for .
Material & labour for Stainless steel ( Grade 316) in ladder, railings, plate, chain etc fixed in staircase, landing etc including necessary welding, buffing/ polishing and fixing including necessary drilling, bolting or riveting and embedding post in concrete complete all as specified and directed by Engr-in-charge. Note - Design and pattern shall be as approved by GE.
Supply and fixing mild steel plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk ) forming holes, without any attachment including all necessory drilling, bolting,riveting or welding conforming to FE 410-W, (Gde- E-250) quality-A complete all as specified and directed by the Engr-in- Charge.
Supply and fixing structural mild steel framed works such as angle, channel, grating, gate, ladder confirming to Fe-290, E-165 as in supporting structure of duct, drain edge etc including making good the disturbed portion of concrete surfaces with PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) complete all as specified and directed by Engr-in-charge.
Dismantling stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar including removal of rubbish out side MD land complete all as specified and directed by the Engr-in- Charge. Note: The place of disposal shall be find out by the contractor.
Material & Labour for pre painted machine pressed precast concrete interlocking paver block any shape and size conforming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope including spreading screened river sand over surface for filling the joints and gently rolled with vibrator complete all as specified and directed by the Engr-in- Charge.
Dismantling timber scantlings 40 sq. cm and over in section, in wooden coping from edgges of jetty in unframed work and deposited to MCM store yard complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 3000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 3000 mm x 300 mm x 300 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 2000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed by the Engr-in- Charge.
Supply and fixing 1st class hardwood (TEAK WOOD) Plain, solid, straight, rebated on the solid, rounded or chamfered segmental wooden planks of size 1000 mm x 300 mm x 150 mm in one piece including suitabe fixing arrangement as per existing complete all as specified and directed by the Engr-in- Charge.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-charge.
Supply & Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and directed by the Engr-in- Charge.
Supply & Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge,crumple joint etc fixed with self tapping screws complete all as specified and directed by the Engr-in- Charge.
Supply and fixing in repairs Plain, black, mild steel sheeting, 1.50 mm thick in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) fixed with self tapping screws complete all as specified and directed by the Engr-in- Charge.
Material & labour for brushing neat cement slurry with 3 Kg of cement per Sqm complete all as specified and directed by Engr-in-charge.
Material & labour for cement concrete 1:2:4 type B0 (using 20 mm gradedstone aggregate) in roof, floor mixed with water proofing compound by weight of 3 % of total cement content complete all as specified and directed by Engr-in-charge Note-WPC shall be measured and paid seperately.
Material and labour for rendering 20mm thick cement plaster in CM (1:3) mixed with WPC by 3% of weight of cement on roof top surface and finished even and fair , priming @ 0.8 Kg per sqm of finished concrete surface and applying a coat of cold bituminous at 1 Kg per sqm and applying seating cloth over cold bituminous surface and applying paving bitumen of any penetration at 1.5Kg per sqm complete all as specified and directed by Engineer-in-Charge. Note -WPC shall be measured and paid seperately.
Material & labour cement concrete 1:2:4 type B0 (using 12.5 mm graded crushed stone aggregate) in floor kerbs, mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer-in-Charge.
Supply only Integral waterproofing compound complete all as specified and directed by the Engr-in- Charge.
Supply and fixing commercial grade UHMWPE Coping of size 300mm x 150mm on edges of various jetty with suitable size SS fasteners complete all as specified and directed by Engr-in-charge. Note :- Lenth of coping shall be approx 3.00 mtr / 1.00 mtr as per site requirement.
Material & labour for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of epoxy paint over a coat of Epoxy primer complete all as specified and directed by Engr-in-charge.
Material & labour for preparation of old steel surfaces exc 10 cm width or girth and applying one coat of epoxy paint over a coat of Epoxy primer complete all as specified and directed by Engr-in-charge.
Supply and fix in repairs SS anchor bolt fastners of size 500mm long and 30mm dia including drilling holes in timber, concreting and grouting as required complete all as specified and directed by Engr-in-charge. Note: In case of non availability of required length and dia of fastener bolt, next higher size available in market shall be used for work without any extra price adjustment.
Nilesh Construction
jalandhara construction
the bhimani group of companies
ROHIT CONSTRUCTION
Shree Ayyappa Engineering
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .