SPECIAL REPAIR TO ROADS AT SRI GANGANAGAR MILITARY STATION

Amount

M & L for preparing existing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. completge all as specified and directed by Engr-in -charge.

M&L for 30mm thick (consoildated thickness) bituminous premixed semi dense asphaltic concrete with 5.5 % binder content (paving bitumen VG-30) by weight of total mix laid with self propelling mechanical paver rolled and compacted over and incl a tack coat of bitumen VG -10 @ 5 Kg/10Sqm to existing black top surface to required camber and gradient with power roller 10 to 12 tonne using paving bitumen as binder completge all as specified and directed by Engr-in -charge.

M & L for painting lines, dashes, arrows, letters etc on road / pavement and like using thermoplastic road marking (White/Yellow) paint with 8% glass beads using special applicator machine with heating arrangement up to 160 degree Centigrade complete All as specified and directed by Engineer-in-Charge.

M&L for repair to pot holes exc 30mm depth, not exe 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, cutting around edges to at least 25 mm in depth, making good by applying tack coat @ 5 kg / 10 sqm ,putting in premix bituminous macadam with coarse aggregate of grading 3 (50 to 20mm size) for 7.5 cm thick and sealed with binder 9.8 Kg per ten Sqm, blinded with 0.09 cum of stone chipping, 6.3mm size mixed with 5.5% by weight of total of mix of paving bitumen binder content (VG-30), rolled and compacted with 10 to 12 tonne power roller (including supply of premixed macadam, binder and chippings ) complete all as specified and directed by Engr-in-charge.

S&F in replacement Cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA strip lens reflector of model No DA 972.0 fixed with and including MS stud of suitable size as per manufactures instructions complete all as specified and directed by Engr-in-charge.

Supply and fixing in replacement of Solar stud 125mm x 125mm x 25mm made from aluminium alloy and construction powered by mono crystal solar panel with high capacity Ni-Cd rechargable battery having view distance 1000 meters LEDs-010mm, 6 pieces for high brightness, 12 hours of continuous lighting at night and can bear upto 25 Ton load complete all as specified and directed by Engineer - in - Charge.

Dismantling of brick work built in cement mortar of any description complete all as specified and directed by Engineer - in - Charge.

M&L for 100mm thick PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregates as in sub base of floor finished even and fair complete all as specified and directed by Engineer in Charge

M & L for sand cushioning 25mm thick laying in floor finished even and fair to receive tile complete all as specified and as directed by Engineer-in-Charge.

M&L for 80mm thickness, M-35 Grade machine pressed rubber moulded concrete colour interlocking paver block of any shape and size confirming to IS 15658-2006 set jointed & pointed in neat cement slurry in floor/paving/path etc with grey cement and pigment complete all as specified and directed by Engineer-in-Charge.

M & L for ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves shall not to more than 5mm including drainage opening wherever required complete all as specified and directed by Engineer-in-Charge

M&L for providing premixed bituminous macadam (compated thickness 75mm or less) using 4% binder content (VG-30) by weight of total mix laid with self propelled mechanical paver finisher rolled and consolidated to required gradient and camber complete all as specified and directedby Engineer in charge.

Demolition of damaged Plain Cement Concrete in patches in ground floor and paving not exc 15 cm thick (below or above) ground level complete all as spd & directed by Engr-in-Charge.

Demolition of reinforced cement concrete of any description and in any position not other wise specifically provided for (reinforcement cut as required to facilitate demolition) complete all as specified and directed by Engineer-in-Charge.

M&L cement concrete type C2 1:3:6 (40mm graded stone aggregate) in encasing of pipe complete all as specified and directed by Engineer-in-Charge.

M&L for reinforced concrete pipes,(450mm dia) class NP2, laid and jointed complete with collars complete all as specified and directed by Engineer-in-Charge.

M&L for brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as specified and directed by Engineer in charge.

M&L 15mm thick rendering in CM 1:4 to brick/concrete wall surfaces finished even & smooth without using extra cement complete all as specified and directed by Engineer in charge.

M&L for providing, cement concrete type B1 1:2:4 (20 mm graded stone aggregate) in roof kerbs of mud stops, rounded or chamfered on edges complete all as specified and directed by Engineer in charge.

M&L preparation and applying two coats of white washing on newly plastered surfaces complete all as specified and directed by Engineer in charge.

Formwork to flat faces of walls, abutments and similar work including attached pillasters, butresses, etc vertical or to batter on flat rough finish surface complete all as specified and directed by Engineer in charge.

Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete rail ings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide complete all as specified and directed by Engineer-in-charge.

Formwork to soffits of suspended slabs exc 20 cm thick, flat fair surfaces complete all as specified and directed by Engineer in charge.

M & L 10 mm dia and over mild steel TMT bars cut to length bent to shape required including cranking, bending binding with MS wire not less than 0.9 mm dia complete all as specified and directed by Engineer in charge.

M & L for RCC M-30 nominal mix (20mm graded stone aggregate) in foundation, incl rafts, footing, foundation beams etc basement slabs and mass concrete complete all as specified and directed by Engineer in charge.

M & L for RCC M-30 nominal mix (20mm graded stone aggregate) in walls, retaining walls and the like any thickness above top of footing including attached plasters and butresses complete all as specified and directed by Engineer in charge.

M&L Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment as in floor complete all as specified and directed by Engineer-in-charge

M&L for 75mm thick PCC 1:4:8, type D-2 (using 40mm graded crushed stone aggregate) as in sub base of floor finished even and fair complete all as specified & directed by Engineer-in-Charge.

M/L for RCC M-30 nominal mix (20mm graded stone aggregate) in roof slabs supported on walls, deck slabs etc complete all as specified and directed by Engineer in charge. ---------------------------------------------------------------------------------------------- Note:- A sum of Rs. 30420.00 will be deducted on account of credit for dismantled/ demolished / taken down material. Please refer details on Srl Page No. 18 (Schedule of Credit) of Tender document

FAIR DEAL CONSTRUCTION CO

M/S SHAKTI BUILDERS