All Weather Open Gym Equipment

Amount

Providing and fixing of Pull/ Push chair Double of dimensions 1950x2280x930 mm including RCC Foundation as Directed by Engineer incharge and as per specifications. All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts is used for assembly. Self-Explanatory stainless-steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters

Providing and fixing of Arm Wheel Double of dimensions 1600x900x750 mm including RCC Foundation as Directed by Engineer incharge and as per specifications. All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.

Providing and fixing of Triple Twister (Three sitting) of dimensions 1100x1100x1375 mm including RCC Foundation as Directed by Engineer incharge and as per specifications .All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.

Providing and fixing of Chest Press Double of dimensions 2000x710x2200 mm including RCC Foundation as Directed by Engineer incharge and as per specifications . All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.

Providing and fixing of Air walker double of dimensions 1500x600x1600 mm including RCC Foundation as Directed by Engineer incharge and as per specifications .All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.

Providing and fixing of Horse Rider Station of dimensions 1000x650x1600 mm including RCC Foundation as Directed by Engineer incharge and as per specifications . All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.

Providing and fixing of Leg Press Double of dimensions 1600x660x1600 mm including RCC Foundation as Directed by Engineer incharge and as per specifications . All joints of pipe are robotically welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint is applied at all the welding points prior to finishing. Equipment made to meet EN16630 specifications-European standard for permanently installed outdoor fitness equipment. Epoxy coating of at least 100 microns to prevent any damage from extreme weather conditions. Thick galvanized main post-of:114 mm diameter. The thickness of pipes varies between 3.5 mm to 7.5 mm. Self-lubricating German bearing for maintenance-free usage. Reinforced foot pedals for extended life. J hook system with 18 mm thickness used for grouting for higher stability and ease of installation. Non fading Virgin LLDPE makes all plastic components sun fade resistant. All open ends of the pipe either sealed in or closed by GI/LLDPE caps for user safety. High tensile steel with galvanized nut bolts are used for assembly. Self-Explanatory stainless steel label fixed on equipment for ease of use. Equipped with a range of motion internal limiters.

Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts,wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres

Providing and laying in position specified grade of cement concrete excluding the cost of centering and , shuttering , All work up to plinth level 1:4:8 (1cement: 4 coarse sand : 8 graded stone aggregate (20mm nominal size)

Supplying and filling in plinth with fine sand under floors including, watering,ramming, consolidating and dressing complete

Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment).(Precast C.C. kerb stone shall be approved by Engineer-in-charge).

Providing and fixing of outdoor rubber tiles of thickness 15mm interlocking around installed open air gym equipments all complete as per directions of Engineer incharge

RENAISSANCE INDIA

MOHAMMAD AFZAL NAJAR

ZAHOOR AHMAD DAGGA

ISHRAT NAZIR ZARGAR