NOTICE INVITING TENDER TOWARDS EXECUTION OF WORK, UP-GRADATION OF TOILET BLOCK AT FORT MIRJAN, UTTARA KANNADA UNDER MW (OW)FOR 2022-23.

Amount

EXECUTION OF WORK, UP-GRADATION OF TOILET BLOCK AT FORT MIRJAN, UTTARA KANNADA UNDER MW (OW) FOR 2022-23.

Removing the glazed tiles in patches in area exceeding 10 tiles and not exceeding 5 sqm including removing old tiles preparing surfaces and laying or setting new or old tiles complete including cost of materials, ( excluding cost of tiles ) labour, complete as per specifications.

Dismantling of flushing cistern/ Indian/ Western commode/ urinals/ wash basins of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate disposal area as per direction of Engineer-in-charge.

Removing GI pipes 20mm dia without earth work excavation and filling in all soils but including cutting in tar roads, gravel roads, metal roads and clearing, washing at spot or conveying from work spot to office store including removal of fittings such as collars, elbows, tees, bends gland cocks, cuts and threads etc. for: GI pipes of 20mm dia.

Removing the G.I. pipes, cleaning, washing and using at spot or conveying from work spot with all lead and lift including removal of all items such as collars, elbows, tees, bends, gland cocks, cuts and threads with appurtenances. pipes of dia 32-80 mm.

Providing and Applying PU based Elastomeric Liquid Applied PU Waterproofing Membrane single component, cold applied, water based acrylic PU dispersion with highly elastic and UV resistant water proofing treatment to the Existing Roof surface/ Chajjas/ Sunken portion of WC: Bathroom applied @ 1.2L/per m2,having tensile strength greater than 1.5N/mm2, elongation greater than 300% with solid content not less than 60% in 2 coats including surface preparation, priming the surface with water based acrylic primer @0.1 L/m2, and spreading 60 Gsm geo textile between two top coats completely as per specification. The finished cost to include surface preparation, making coving at Junction, Bore Packing, treatment of construction joints completely as per specification & with a 10 years warranty on product & work from certified manufacturers as per the direction of the Engineer In charge.

Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed, laid in layers not exceeding 150 mm thickness, well compacted using plate vibrators, including all lead & lifts, cost of all materials of quality, labour, Usage charges of machineries, curing, and all the other appurtenances required to complete the work as per technical specifications. Mix 1:3:6 (M10) Using 20 mm nominal size graded crushed coarse aggregates.

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, providing and removing scaffolding, including cost of materials, labour, curing complete as per specifications and as per directions of Engineer-in-charge.

Providing and laying Anti-skid Vitrified tiles of approved make and colour in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ m2 including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600 x 600 mm.

Providing skirting, dadooing, rises of steps with colour glazed tiles 6mm thick of approved colour and make on 10mm thick cement plaster 1:3 and jointed with white cement slurry over existing rough plaster surface using glazed tiles of approved make and size including cost of materials, labour, complete as per specifications.

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid of approved make and colour, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) of approved colour and make with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required.

Providing and fixing granite stone slab of approved colour with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in- charge and finished smooth.

Providing and fixing white vitreous china flat back half stall urinal of approved colour and make size 580 x 380 x 350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required Single half stall urinal with 5 litre P.V.C. automatic flushing cistern.

Removing white wash or colour wash by steel brushing and / or scraping, sand papering and preparing wall surface smooth including repairs to scraches including cost of labour, material complete as per specifications.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per specifications and as per directions of Engineer in charge.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing & fixing 30mm thick factory made rigid foam Prelam Panelled Door Shutters of approved make and colour made from M.S. tube of 19x19mm, 19 gauge for stiles and 15x15mm for top & bottom rails, covered with heat moulded Prelaminated PVC C Channel of 5mm thick sheet & 30x50mm wide to form stiles & 5mm thick & 75mm wide Prelaminated PVC Sheets for top rail, lock rail & bottom rail on either side & 5mm thick, 20mm wide cross PVC sheet as gap insert for top rail & bottom rail, Paneling of 5mm thick PVC sheet Prelaminated on either side fitted in the M.S. frame, Sealed to the stiles & rails with PVC Designer beading on either side & joined together with solvent cement adhesive etc., Complete as per manufacturers specification & direction of Engineer-in-charge fixed to frames with 3 nos of 75mm Aluminium hinges with both side prelam.

Providing and fixing wash basin of approved make and colour with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requires: using White Vitreous China Flat back wash basin size 550 x 400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing granite counter top with approved colour and product including all cutting, edge rounding, polishing, fitting, fixing with frames etc; complete.

Wood polishing on existing wooden door with ready mixed wax polish of approved brand and manufacture to give an even surface including preparing the surface after thoroughly cleaning oil, grease, dirt and foreign matter, sand papering smooth, cost of materials, labour complete as per specifications and as per directions of Engineer-in-charge.

Providing and fixing of plumbing and Sanitary pipe lines including supply of following good quality plumbing materials of approved brand or equivalent brands, including all transportation charges, loading and unloading charges, labour charges etc. complete as per the instruction of the site in charge. 6'' PVC Pipe of 4Kg/cm2

4" PVC pipe of 4Kg/cm2

4'' PVC Elbow of 4Kg/Cm2

4'' PVC P trap

4'' coupler

4" X 3" reducer

3''PVC pipe of 4 Kg/cm2

3'' Floor trap, UPVC multi inlet

3'' PVC Elbow of 4Kg/Cm2

3'' PVC P trap

3'' coupler

5''x5'' CP grating

4'' PVC Nahani Trap

1' CPVC pipe

1' CPVC coupler

1' CPVC Elbow

1' CPVC valve

1' Brass valve

1'' CPVC 'T '

3/4" CPVC pipe

Concrete Nails

CPVC solution adhesive.

SS Long body taps

2 in 1 Bib Cock, with 1.2 mtr flexible health facuet

1000 ltr water tank

SS Pillar taps

Skilled Labour (Plumber)

Semi Skilled Labour

Unskilled Labour

Up-gradation of the electrical system of the Toilet block including removing of the fused and damages electrical board, lights wiring and providing and fixing new LED lights, complete including cost for supply of materials of approved brand, conveyance charges, labour charges etc; complete as follows:- 1.5 square mm Wire bundle of 90m(branded with ISI mark)

2.5 Square mm Wire bundle of 90m (branded with ISI mark)

PVC pipe 3/4 inch

3/4 inch Tee

3/4 inch elbow

3/4 inch bend

2 Pole MCB 32 amps

20 Watt led tube light set

MCB Cover

Adapter

Modular Socket 5 Amps

Switch 5 Amps

32 amps fuse

18 Modular Box

18 Modular Plate

8 Modular Box

8 Modular Plate

4/3 Core UG cable wire

Skilled Labour (Electrician)

Semi skilled Labour

Unskilled Labour

Earth work excavation for pipeline trenches in all kinds of soils by mechanical means above 600 mm trench width as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & boning rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and leveling the bottom of trench to the extent required , utilizing the available excavated earth locally for the work etc., and all other appurtenances complete.

Constructing brick masonry chamber of internal dimension 300x230mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.

Constructing brick masonry chamber of internal dimension 600x600mm and depth of 600mm (inner dimensions) with modular bricks of CD 75 in cement mortar 1:6, bed concrete 150mm thick with 1:3:6, plastering 12 mm thick with cement mortar 1:4, CC 1:2:4 coping 75mm thk for fixing CI cover & frame etc. excluding the cost of CI frame and cover.

Cleaning Septic Tank of more than 100 users capacity as per details and instructions.(While cleaning septic tank all safety and precautionary measures to be taken, Standard Operating Procedure to be adopted and PEMSR Act 2013 to be strictly followed).

Painting with synthetic enamel paint of approved brand and colour to the existing hand railing and manufacture of required colour to give an even shade : One coats on old work after proper cleaning of the old surface, as per specifications and as per directions of Engineer in charge.

DHARMENDRA P JADHAV

RAGHAVENDRA MUNISWAMY BHOVI

GURAYYA V NIMBALAGUNDI