REPAIR TO FENCING, GATE, PATH, HARD STANDING IN DRC AREA UNDER AGE (I) AYODHYA

Amount

Demolition of brick work built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings etc complete all as specified and directed.

Taking down cement plaster from brick or stone walls any description including raking out joints, hacking for key, scrubbing down with water to receive plaster including rubbish off the premises etc complete all as specified and directed.

M&L for PCC (1:2:4) type B0 (using 12.5mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed by Engr-in-Charge.

M&L for brick work with old size sub class 'B' bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) comlete all as secified and directed. Note : Brick work shall be done using coarse sand only.

All as per Srl item No. 4.00 above but except bricks (serviceable bricks obtained from demolition shall be re-used). Note : Brick work shall be done using coarse sand only.

M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed. Note : Plastering shall be done using coarse sand only.

M&L for 15mm thick rendering cement plaster in cement mortar (1:4) on other than fair faces of brick work or concrete surfaces, finished the surface even and smooth without using extra cement complete all as specified and directed. Note : Plastering shall be done using coarse sand only.

M&L for preparation of newly plastered surfaces of walls and applying two coats of weather coat exterior emulsion Apex paint over a coat of exterior grade water proof wall care putty 1mm thick and a coat of primer complete all as specified and directed.

S&F mild steel work as in hand rails, half round or othe steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc, wind ties for roof including posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

All as per Srl item No. 9.00 above but for fixing only.

Dismantling of fencing wire mesh of any type complete all as specified and directed by the Engr-in-Charge.

Dismantling posts or struts (wood, steel or RCC) of any section including taking out embedded portion from concrete, brick work, masonary etc and making good disturbed surfaces complete all as specified and directed.

S&F for galvanised 2 strand steel barbed wire 2.24 mm dia barbed with 2 mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails, straining bolts including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line wire to be measured) complete all as specified and directed by the Engr-in-Charge.

S&F barbed razor tape concertina coil of minimum dia 2.50 + 0.1mm hot dip galvanised spring tensile wire of UTS 145 to 150 Kg per Sqmm and dia of coil when stretched 1000 mm, having min number of circles 10 per RM, min number of clips 25 per RM & min wt of coil 1.625 Kg/RM complete all as specified and directed by Engr-in-Charge.

Supply only steel wire chain link fencing 75X75mm mesh size, secured with MS flat, straing bolt etc complete all as specified and directed by the Engr-in-Charge.

Fixing only chain link fencing including line wire and mesh size, fixed to any type of standard rails, posts, straining bolts etc including binding with & provision of mild steel binding wire (annealed) not less than 0.9mm dia complete all as specified and directed by the Engr-in-Charge.

M&L for preparing new steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickness, laid dry in floors, aprons etc complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8), type D-2 (using 40mm graded crushed stone aggregate) as in sub base and the like complete all as specified and directed.

M&L for 60mm thick machine pressed glossy and moulded precast concrete M35 grade interlocking paver block of any size and shape with grey cement and pigment, conforming to IS 15658-2006, laid dry over sand cushion complete all as specified and detected. Note: Sand for cushioning shall be measured and paid for separately.

M&L for neat dry fine sand for cushioning for laying interlocking paver blocks complete all as specified and detected.

R K BROTHERS (BID ID -3245147)

ABC CONSTRUCTION CO. (BID ID -3245081)

SAI RAM ASSOCIOATES (BID ID -3251659)

Jairajyadav security services (BID ID -3245084)

ADITYA VIKRAM SINGH ASSOCIATES (BID ID -3245014)

M/S EASTERN TECHNOCRAFTS (BID ID -3245504)

D K Engineers and contractors (BID ID -3241315)