Special repair of GO Mess at Police line Chamba (SH Providing wire gauge door shutter tile flooring cupboards, P/F ,Krono flooring and painting ,distempering work

Amount

Taking out doors, windows and clerestory windows shutters area not exceeding 3 sqm ( three square metre) in area. (steel or wood) including stacking up to any lead & Lift,as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 40 mm ( forty millimetre) thick 2nd class Deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows. Including black enamelled iron butt hinges with necessary screws as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 19mm ( nineteen millimetre) thick Commercial Board water proof shutters for cup boards i/c fixing with nickel plated piano hinges with screws etc complete) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing 40 mm (forty millimetre) thick second class deodar wood wire gauge shutters using galvanised M.S. wire gauge of I.S. gauge designation 85 G(eighty five G) with wire of dia 0.56 mm (zero point five six millimetre) for doors, windows and clerestory windows including bright finished black enamelled iron hinges with necessary screws within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 1.00mm ( one millimetre) thick coloured or plain lamination sheet (sunmica) on boards/ply wood sheets with approved adhesive and nails etcetra complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing 1mm ( one millimetre) thick M.S. piano hinges brightfinished with nickel plating flange being 35mm (thirty five millimetre) wide fixing with necessary screws complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 75 mm ( seventy five millimetre) bright finished brass handles with screws etcetera complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 65x35mm ( sixty five into thirty five millimetre) special quality chromium plated brass cup board lock with six leavers including necessary screws etcetera complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing bright finished brass ball catcher 10 mm ( ten millimetre) diametre complete within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter with Readymixed paint brushing wood primer pink as per the directions of the Engineer-in-charge. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Painting two coats (excluding priming coat ) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of dirt, dust and other foreign matter, sand papering and stoping with enamel paint other than white as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar drops, dust loose materials and other foreign matter sand papered smooth to give final matter finish to the surface complete as per the directions of the Engineer-in-charge. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Finishing walls with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surface (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete as per the directions of the Engineer-in-charge. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 10mm ( ten millimetre) thick anti skid water proof stain and impect resistent heavy duty vetrified tiles Nitco or equivalant 600x600mmx10mm ( six hundred into six hundred into ten millimetre) manufactured of approved shade and colour in flooring, treads of steps and landings laid over 12mm ( twelve millimetre) thick cement mortar 1:3 (One cement isto three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Painting two coat (excluding priming coat) on new steel and other metal surfaces under coat with ready mixed paint brushing to give an even shade including cleaning the surface all dirt, dust and other foreign matter With white readymixed paint within all leads and lifts and as per the direction of the Engineer-in-charge and other incidentals. The rate is including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

White glazed tiles 6mm (six millimetre) thick in skiriting or risers of steps and dado on 12mm (twelve millimetre) thick cement mortar 1:3 (one cement isto three sand) finished with flush pointing in white cement as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 300 x 16 mm ( three hundred into sixteen millimetre) aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete.as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 200 x 10 mm ( two hundred into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera completeas per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 100 x 10 mm ( One hundred into ten millimetre) aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etcetera complete. completeas per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 125 mm (one hundred twenty five millimetre) as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Providing and fixing aluminium handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete 100 mm (One hundred millimetre) within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Dismantling cement asbestos celotax/hard board in ceiling or partition wall including stacking of serviceable materials and disposal of un-serviceable materials up to any lead & lift (Frame work such as joists, beams to be measured and paid for separately)complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 5 mm ( five millimetre) plain asbestos cement sheet ceiling of approved quality with butt jointing and wood screws (frame work and cover fillets to be measured and paid for separately) complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and fixing 1st class Kail wood plain square edged cover fillets (beading) 40mmx12mm ( forty millimetre into twelve millimetre) section with wood screws in ceiling and lining including mitring at junctions complete within all leads and lifts and as per the direction of the engineer-in-charge and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Providing and installation 9mm ( nine millimetre) thick classic floor component AC-3 high density core board of KRONO/ARMSTROG or euivalent make with high pressure lamination laid over 2mm thick expended polythene foam and 100 ( one hundred) micron thick polythene sheet fixed on cement concrete surface of floor complete as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental and further as per specification, approved drawing & Design. The rate is including octroi, royality, Malkana, toll tax, GST or any other taxes imposed by the Government .

Repair of King size Deodar wood bed with side corners , repair of two seater Godrej make Sofa set of premium quality & repair of high quality 4 " ( four inches) mattress as per the directions of the Engineer-in-charge including carriage of material within all leads and lifts and other incidentals. The rate including octroi, royality,Malkana,toll tax, GST tax or other taxes imposed by the Government.

Darshan Kumar

Tahir Malik Allied Services