Supply and Installation, Commissioning And Testing Of Cattle and Poultry Feed Plant 3.5 Tph and Molasses Tank 15000 Lit

Amount

Intake Section

Intake hopper i.Capacity 100 kg ii.2 MM thick plate iii.With Grating

Grander Section

Bucket Elevator i.Cap 5 Mt /hr. ii.Min. Height 18 Ft iii.Boot & Helmet in iv.Top Frum Rubber Lagged v.Bottom Drum Self Cleaning Cage vi.Bucket – 5 inch vii.Belt – 4 ply viii.M 24 Grade ix.Casings - Min 1.5 mm Plate Thick x.Bottom Min. 2 mm thick xi.With Motor Min 2 HP

Hopper Above Hammer Mill i.Capacity Minimum750 Kg, ii.Min.2 mm thick Plate. iii.with Man Hole and discharge chute & Gate. iv.side glass for material display

Auto Feeder i.Feeder Control Frequency Drive ii.With Geared Motor Min.2 Hp iii.Thick-Min.5 mm

Hammer Mill 5 MT/ hr. with motor i.Full Circle ii.Material Mild Steel Grade IS 2062 iii.Material Min. 8 mm thk iv.bearing No SN 513 2 Nos. v.Shaft Material EN-9 vi.C.L. Pulley Driven vii.C.L. Pulley Drive viii.With Motor Min.30 Hp ix.Bitter Material En-9 x.V-belt Type B 02 Nos xi.Motor Arrangement

Mixing Section

Bucket Elevator i.Cap Min. 5 mt/hr. ii.Height Min. 22Ft iii.Boot & Helmet in iv.Top Drum Rubber Lagged v.Bottom Drum Self Cleaning Cage Type. vi.Bucket: -5 Inch vii.Belt: - 4Ply, viii.M24 Grade ix.Casings: - Min.1.5 mm Plate Thick. x.Bottom Min. 2 mm thick xi.With Motor Min.2 Hp

Hopper above Batch i.Capacity Min. 750 Kg, ii.Min.2 mm thick Plate. iii.Bottom Min. 2.5 mm thick iv.with Man Hole and discharge chute & Gate. v.side glass for material display

Batch Mixer Min 750 Kg capacity per batch 3.5 m/t hr i.Type-Double Ribbon Blender ii.Side Plates-6mm iii.Body- Min.4mm iv.Solid Shaft with Support Bars for Inner & Outer Ribbon v.CV-Below5 vi.Mixing Time-7.5 Min. vii.Supplied with Medicine Hopper viii.With Geared Motor Min.10 Hp

Hopper Below Batch mixer i.Capacity Min. 750 Kg, ii.Min. 2 mm thick Plate. iii.with Man Hole and discharge chute & Gate. iv.side glass for material display

Paddle Screw Conveyor i.To transfer Mash Feed for Pelleting) ii.Size: 08" iii.Length X 4Mtr. iv.Make: M.S. v.With Geared Motor Min. 2 Hp

Pelleting Section

Bucket Elevator i.Cap 5 mt/hr ii.Height Min. 18Ft iii.Boot & Helmet in iv.Top Drum Rubber Lagged v.Bottom Drum Self Cleaning Cage Type. vi.Bucket:6 Inch vii.Belt: - 41Ply, viii.M24 Grade ix.Casings: - Min. 1.5 mm Plate Thk. x.Bottom Min. 2 mm thick xi.With Motor Min. 2 Hp

Hopper above Pallet Machine i.Capacity Min. 750 Kg, ii.Min. 2 mm thick Plate. iii.Bottom Min.2.5 mm thick iv.with Man Hole and discharge chute & Gate. v.side glass for material display

Screw Feeder i.To transfer Mash Feed for Pelleting) ii.Size: 08" iii.Length X 1.5Mtr. iv.Make: M.S. v.With Geared Motor Min. 2 Hp

Pettet Conditioner i.Min 10 Inch SS body ii.Ms Make paddle iii.steam injector iv.With Motor Min. 3 Hp

Molases Mixer i.Compitable

Pellet Mill i.Capacity- Min 3.5.MT/Hr. at 2/4/6/8 mm die ii.SS door iii.Main Door & Inlet Chute iv.Body Guard Min. 3 mm v.Foundation 150 mm channel vi.die and shell vii.Straight Fit Die viii.Over Flow Flap ix.Share Pin for Overload Protection x.With Motor Min.75 Hp

Cooling Section

Counter flow SS cooler i.SS Cooler , ii.Model:- “CICF-5” iii.All Contact parts in SS 304(3mm Thick). iv.Level Sensor v.Sight Glass at two side & Maintenance Door vi.SS Piece for even distribution on Pellets in Cooling SS Body Chamber vii.Temperature Indicator

Air Lock i.With Geared motor (Min.1 Hp) ii.Size – 8 inch iii.MOC – SS 304

Eccentric i.With Geared motor (Min. 2 Hp) ii.MOC – MS & Foundation

Aspiration

Blower Cyclone i.Cyclone Min. 2 mm thick ii.MOC - GI Material iii.Dust Collection iv.Ducting Line v.Pipeline - GI vi.With motor (Min. 7.5Hp)

Crumble machine i.Feeder Min. 1 hp ii.Crumble machine Min.3*2 hp iii.Screw feeder Min. 2 hp

Bucket elevator i.Cap 5 mt/hr ii.Height 18Ft iii.Boot & Helmet in iv.Top Drum Rubber Lagged v.Bottom Drum Self Cleaning Cage Type. vi.Bucket: - 6 Inch vii.Belt: - 4Ply, viii.M24 Grade ix.Casings: - 1.5 mm Plate Thk. x.Bottom 2 mm thick xi.With Motor 2 Hp

Gayro screen i.Cap – Min.3.5 tph ii.Size – Min. 60 inch iii.Eccentric iv.Foundation v.Vibro motor Min. 2 hp vi.Double deck

Bagging i.Capacity Min. 750 Kg, ii.Min. 2 mm thick Plate. iii.Bottom Min. 2.5 mm thick iv.with Man Hole and discharge chute & Gate. v.side glass for material display

Erection & commissioning i.Plant Erection ii.Labor Transport iii.Engineer Visits iv.Labor Lunch All above at supplier scop

Electrical panel i.Control Pannel with cable tray. ii.Should be branded. all required cablees with fitting from panel to machine/motors with min 3 vfd

Transaction Pieces All at supplier scop

Supporting Structure Min. 8 ton and above

Magnet Compitable for required capacity.

Tool kit Standard

Molases Tank 15000 Ltr capacity. With civil foundation work , Pipeline with fittig , Min 2 hp motor Motor for supply of molasses up to plant service tank/assembly.

Instrallation and Commissioning Charges

Nav Indus Food Machines Pvt Ltd (BID ID -6859884)