Repairing of Gates and Gearing System of Rajasthan Feeder at RD 124375 and Escape 122652

Providing & fixing in position of flat/wedge seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(120 mm dia x 20 mm th.)

Providing of hollow bulb seal & fixing in position including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge. (125/55)

Supply, Providing and fixing of Galvanized Bolts & nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects.

Dismantling of wire rope/de-linking gates and hoist mechanism complete in all respects and to entire satisfaction of Engineer in charge.

Zigs and fixture Gas, Tools and Plants Rigging and Haulage Arrangements for replacing damage and broken parts, carriage and other misc items etc as per drawing & direction of Engineer-In charge complete in all respect at site.

Fixing and Holding the gate with the help of 80 tonne capacity crane.

Overhauling of gate mechanism of all types including dismantling, greasing, oiling and re-installation of mechanism complete in all aspects more than 10 feet up to 30 feet width of gate

Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge.

Removing damaged old rubber seal bulb or flat including clamp plate of all sizes & types.

Removing, providing & fixing clamp plate, complete in all respects.

Providing and fixing rope drum cover

Providing Gate wheel complete in all respects and to entire satisfaction of engineer-in-charge 500mm dia

Removing. Assembling and fixing in position gate wheel assembly complete in all respects and to entire satisfaction of Engineer-in- charge.

Removing, & fixing of roller pin in position complete in all respects and to entire satisfaction of Engineer-in - charge.(upto 75mm/above 75mm)

Scrapping, Brushing to remove paint to base metal surface.

Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint.

Painting two coats with ready mix synthetic enamel paints over one coat metal primer

Removing, providing and fixing Skin Plate 12mm

Removing, Providing and fixing ISMB 350 x 140mm

Removing, Providing and fixing ISA 150 x 150 x 15mm

Removing, Providing and fixing ISA 130 x 130 x 12mm

Removing, Providing and fixing Side Plate 250 x 12mm

Removing, Providing and fixing of damaged chequred plate 8mm

Removing, Providing and fixing ISA 75 x 75 x 8mm

Removing, Providing and fixing ISMC 250 x 80mm

Removing, Providing and fixing ISA 65 x 65 x 8mm

Removing, Providing and fixing ISA 60 x 60 x 8mm

Removing, Providing and fixing ISA 40 x 40 x 6mm

Removing, Providing and fixing Flat 45 x 6mm

Removing, assembling and fixing in position GUN metal bush in complete in all respect and to the entire satisfaction of Engineer in charge

Providing Gun Metal Bush Assembly

Providing and fixing Grease Nipple

Removing, Providing and fixing CDU Cover

Supply of multi purpose Synthetic hetiv grease

Supply of Diesel

Supply of Mobil Oil

Providing Gate wheel complete in all respects and to entire satisfaction of engineer-in-charge 250mm dia

Removing, & fixing of roller pin in position complete in all respects and to entire satisfaction of Engineer-in - charge.(upto 75mm/above 75mm)

MS Housing Cover with worm and worm wheel assembly, shaft, handle, gun metal bush with triple start threading inside complete in all respects 2.5 Ton capacity

Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 65mm dia

Supply and fixing of spindle cover

Dismantling of Spindle Hoist Machine at site complete in all respects.

Supply and fixing of Common Shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge

Fixing of coupling for common shaft with supply of Spindle shaft coupling rods and cover complete in all respect and to entire satisfaction of Engineer In charge.

MADAN MOHAN (BID ID -637637)

VARSHA CONSTRUCTION CO (BID ID -637690)

sabreen enetrprises (BID ID -637516)

ANJU INDUSTRIES (BID ID -632973)

S.K SOOD (BID ID -631934)