REPAIR IN FLOORING, CEILING, JOINERY WORK, TILING AND OTHER MISC B/R WORKS AT INS TUNIR AREA AT NAVAL STATION KARANJA

Amount

Taking down cement plaster on brick walls or stone walls etc including raking out joint, hacking for key, scrubbing down with water etc including removing debries directed for a distance max upto 500m complete all as specified.

M&L for rendering 20 mm thick on fair faces of brick/concrete surfaces cement plaster in CM (1:4) , finished even and smooth without using extra cement, complete all as specfified and directed.

M & L rendering 15mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:6 finished even and smooth (with out using extra cement) complete all as specified.

M&L rendering 5mm thick in CM 1:3 on ceiling finished even and smooth finish complete all as specified and directed.

Demolition of pre-cast concrete block masonary built in cement mortar including all quoins, arches, pillars etc. and pre cast concrete articles complete all as specified and directed.

M&L for pre-cast cement concrete block masonry with solid blocks in 10cm in width in type B1 (1:2:4) and setting in mortar (1:6) complete all as specified and as directed

M & L for preparation of new or previously untreated plastered surfaces of walls and applying two coats of acrylic antifungal paint exterior grade paint plain or camouflage pattern on one coat of primer complete all as specified and as directed

M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of chalk whitening on plastered surfaces complete all as specified and directed.

M&L preparation of new plastered surface of ceiling and applying three coat of white wash on ceiling complete all as specified and directed.

Dismantling AC (Corrugated, semi corrugated, etc) sheets in roof coverings complete all as specified and as directed

M&L 6 mm thick asbestos cement corrugated sheet in roof fixed with 'L' or 'J' type hook or crank bolts complete all as specified and directed.

S&F AC two piece adjustable serrated ridge for corrugated sheets in roof coverings, fixed witth 'L' or 'J' hook complete all as specified and as directed

Dismantling plain or corrugated steel sheeting ,any gauge ,thickness incl Nainital or similar pattern roof covering complete all as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.5mm thick of an colour having tenstile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed

Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) complete all as specified and as directed

-ditto- as per Item No.16 above but n.exc 1.5 sqm complete all as specified and as directed

Taking down shutters of any description exc 1 Sqm but nexc 2 sqm complete all as specified and directed.

Taking down shutter from frame exc 1 sqm but n.exc 2 sqm each including iron mongrey & refixing in same opening complete all as specified and directed by Engr-in-charge.

S&F IInd class hard wood plain solid, straight, chowkats and frames wrought framed rebated on the solid , rounded or chamfered put together with glue pinned at joints.

S&F 35mm thick second class hard wood, plain framed, paneled shutter (Two panel) of 9mm BWP comercial ply or 12mm veneered particle board with comercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated .

S&F solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified.

S&F factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for styles and plain colour PVC sheet for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed.

S & F extruded aluminium alloy handles fabricated type anodized 150 mm size.

Supply only Integral water proofing compound all as specified and directed.

M&L mild steel Butt hinges medium weight, cold rolled and fixed 100 mm long .

S&F 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed.

S&F 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

M & L for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

M & L PCC 1:2:4, type B1 (using 20 mm graded agg) coping or filling for hold fast and as in coping, bed block, edges of tiles etc complete all as specified and directed. without using extra cement complete all as specified and directed.

S&F aluminium door/window/ventilator/partition, made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary jointing cleats, glazing clips, powder coated aluminium snap beading, screws etc; complete and also including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts, hooks & eyes, peg stays and handles including connected items, with and including rubber beading for 4 or 5mm thick glass and star lock for window or mortice lock for door making good to the disturbed portion with its original specifications, complete all as specified and directed.

M&L Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L 4 mm thick plain glass sheets ordinary quality in any size, each pane fixed with rubber beading or oil putty for windows/doors/partition etc all as specified and directed.

S & F rough cast wired glass 6.40 mm thickness and glazing with rubber beading or oil putty for windows/doors/partition etc all as specified and directed.

S&F in repair aluminium anodized grill of design DG 104 pattern made out of 10mm dia rod Fixed with and including standard aluminium frame of F section of size 23.40mmx15.30mm &1.4mm thick all as per manufactures instructions complete all specified & directed. Make of grill Deco grill or equivalent

M & L in repair double action floor spring hydraulically regulated made up of minimum 1.25mm thick alum,inium alloy sheet foundation box, main ody with stainless steel cover, governing pivot made of brass, other plart made of mild steel heavy duty and fixed.

S & F in repair for aluminium (extruded section) body hydraulically door closer regaulted, designation No.3 universal type, suitable for door shuttes of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and as directed.

S&F aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples as fixed in repairs complete all as specified and as directed

S&F 4 mm thick sheet glass , figured glass, pinhead type , in any size, each pane fixed with rubber beading or oil putty for windows/doors/partition etc all as specified and directed.

S & F in repair floor door stopper of Aluminium alloy body and tongue, over all length of cover plate 150mm anodised with hard drawn steel spring, fixed to shutters complete all as specified and as directed.

S & F night latch 7 lever Godrej brass locking mechanism steel body with scratch resistant powder coated finish of size 98mm x 67mm x 28mm as in repairs all as specified and directed.

S & F in repairs Pre-laminated 18/19 mm thick partilcle baords, exterior grade, prelaminated both sides with decorative choice lamiantions complete all as specified and as directed.

S&F in repair 12 mm thick vertical toughened glass including firm as in door shutters / partition with including stainless steel SS-304 patch fitting fixed with Anchor fastner, each glass panes shall be exceeding 1.5sqm, but not exceeding 2 sqm each, all edges of glass shall be diamond polished of make as approved by GE.

S&Fin repair 30 mm dia stainless steel handle of 45 cm long and fixed to toughned glass as per manufacturer's instructions of make- Enox or equivalent make as approved by GE.

S&F in repair stainless steel glass lock fixed to toughened glass as per manufacturer's instructions of make-Enox or equivalent make as approved by GE.

Demolition of cement concrete (un-reinorced) in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) all as directed.

M&L PCC 1:4:8 type D-2 using 40 mm graded aggregate as in sub base to flooring complete all as specified and as directed.

M&L PCC 1:2:4 type B2, using (40 mm graded agg) ,100 mm thick as in flooring all as specified & directed

M & L PCC 1:3:6, type C2 (using 40 mm graded agg) 75 mm thick as in plinth protection without using extra cement complete all as specified and directed.

Dismantling wall and ceiling boards or insulation boards, any thickness, any description, including cover fillets complete.

S&F for false ceiling with Armstrong XL 24 mm grid system of grid size 600x600mm with 14 mm thick ceiling board of RH-90 of Armstrong. Grid shall be suspended from ceiling using 4 mm dia pre straighten GI wire with 6 mm nylone rawl plug & screws at 1200 mm intervals complete all as manufacturers instructions and as directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

S&F in repairs 14mm thick ceiling board of size 600mm x 600mm of RH-90 of Armstrong false ceiling complete all as specified and directed. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

S&F Anodised aluminium snap grid of size 600x600 mm frame work for false ceiling complete and Hangers 6 mm dia GI ( upto 1200 mm length ) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40x3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including PVC insulation panels with EPS stuck to 1mm plain PVC sheet suitably placed in false ceiling grid made of Aluminium / G.I/M.S. as per specificatio and drawing, Thickness of PVC insulation panel 10mm complete all as specified and directed

S&F 10 to 12mm thick plaster of paris sheets fix in ceiling with and including grid made out of angles and tees of one mm thick G I sheets fixed at not more than 45cm centre to centre in both directions. GrId secured by vertical tai of GI sheet angle at not more than 1.2m centre to centre in both directions. The veritical tai of GI sheet angle shall be fixed with M S dash through fastners of 8 mm dia. The ceiling is to be provided at different profiles like curved, flat, sunk and or raised mouding, the joints shall be filled with plaster of paries complete all as directed by Engineer-in-Charge.

M&L in repairs 6mm thick non asbestos fibre cement building designed boards in ceiling fixed or laid /inserted to timber/GI/Aluminium frame work with screws. (Note:- Item rate shall be include any height of Bldgs for scafolding as all arrangement.)

M&L preparing of new POP/ false ceiling surfaces and apply two coats of oil bound distemper over a coat of alkali-resistant primer complete all as specified and as directed.

Dismantling of stone slabs & tiles of any description or thickness in floor aprons, cills etc laid bedded & pointed in any mortar complete all as specified and directed.

Dismantling, floor, hearth or wall tiling including cement mortar bedding complete all as specified and as directed

M&L machine pressed 80 mm thick M40 Grade pre-cast cement concrete interlocking paver block any shape and size with grey cement and pigment(colour) glossy finish , laid dry over 50mm thick stone dust or sand base and compacted with using vibrator, complete all as specified and directed.

Material and labour for 50 mm thick sand cushioning for laying interlocking paver block complete all as specified and directed.

M&L for chequered cement concrete tile 30cmX30cmX 20 to 25mm thick set jointed and pointed in neat cement siurry in floor with grey cement and pig ments over 20mm thick screed bed or bedding layer of CM (1:6) complete all as specified and as directed.

M & L for Non Skid ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15 mm thick screed bed in cm (1:6) for laying floor fineshes complete all as specified and directed.

M&L non skid coloured ceremic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 Sqm but not exceeding 0.38 Sqm, as in floors over screed bed or bedding layer of morar 15 mm in cement mortar 1:6 set and jointed in neat cement slurry and pointed in white or coloured cement to match the surface complete all as specified and as directed.

M&L for Vitrified Ceramic tiles 10 mm thick (square/ rectangular) polished, light shade area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM (1:6) etc complete all as specified and directed.

M&L for Glazed ceramic colour tiles 300x200x5 to 7 mm thick as in skirting,dados, risers to steps,etc,set and jointed in neat cement slurry and pointed in colour cement to match tiles, over and including 10 mm thick rendering or bedding layer in cement mortar 1:4 complete all as specified and directed.

M & L for Glazed ceramic tiles in vertical surface 350mmx250mm x7mm / 450X350X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10 mm thick rendering or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L Machine cut kota stone kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and 20mm thick screed bed or bedding layer of mortar in cm 1:6 for laying floor finishes

S&F Granite tile of 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete including 15mm thick screed bed or bedding layer of mortar in CM 1:6 for laying in vertical surfaces, complete all as specified and directed.

S&F Granite tile of 20mm thick vertical surfaces such as skirting, dado, steps, wash basin table top, flooring, kitchen slab, machine cut bedded and jointed with grey white cement slurry and pointed with white cement with add mixture of pigment to match the shade of granite stone including cutting and polishing including 10 mm thick rendering or bedding layer in cement mortar 1:4 complete all as specified and directed.

M&L for green marble 17/18 mm thick machine cut, jointing and pointing with grey cement slurry including 15mm thick screed bed or bedding layer of mortar in CM 1:6 complete all as specified and directed.

M&L for green marble 17/18 mm thick machine cut in skirting / dado,window sill, laid over cement screed, jointing and pointing with grey cement slurry complete all as specified and directed.

S & F in repairs 15mm bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S & F in repairs 15mm stop valves, cast copper alloy,screwed down,high pressure,with crutch or butterfly handle,screwed bothends for iron pipe or for unions and fixed complete all as specified and directed.

M&L for 75mm diameter of outlet PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed

S&F in repair 15 mm bore pillar taps cast copper alloy with capstan heads chromium plated screwed down high pressure with long screws shanks and fly nuts complete all as specified and directed.

Providing and fixing in repair, Decorative Hollow PVC sheet 10 mm thick fixed to wall panelling with self drilling screws including necessary frame or grid work and corner mouldings as required as per manufacturing instruction and complete all as direced by Engr -in-charge

Providing and fixing in repair suspended false ceiling, Decorative Hollow PVC sheet 10 mm thick fixed to ceiling section with self drilling screws as per manufacturing instruction. Size of the main supporting section (Ceiling Section) is 80x 26 x 51 mm, Perimeter chanel 20 x 28 x 30 mm, Intermidiate chanel(primary section to support the ceiling section) 15 x 45 x 15 mm and ceiling angle(to provide suspensions from the structural soffit) is 25 x 10 mm including necessary frame or grid work and corner mouldings as required as per manufacturing instruction and complete all as direced by Engr -in-charge

Complete removal of existing PVC tiles /sheets, of any description in any position including cleaning, wire brushing, watering, removal of debris upto 1500mtr distance complete all as specified and as directed

S&F for PVC tiles /sheets, of 2mm thick laminated plain coloured homogenous, laid with approved rubber based adhesive in floors all as specified and directed.

S& F in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, 32mm dia PVC waste pipe, inlet ,outlet etc complete all as specified and directed.

S&F fixed in repairs Wash hand basin vitreous china (flat back) size 550 x 400 mm including brackets waste brass chromium plated with long screwed shanks and fly nuts 32 mm size including 32mm dia PVC waste pipe complete all as specified and directed.

S&F vitreous china wash down water closet pan (Pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) fixed as in repairs complete all as specified and directed.

S & F in repair 5.5 mm thick and 120/125mm wide sheet glass shelf assembly with chromium plated bracket guard and railing 500/600mm long as complete all as specified and as directed.

S&F in repairs brass CP towel rail, 20mm dia, D type , 60 cm long between flanges complete all as specified.

S&F in repair Brass CP wall mixer for mixing hot & cold water screwed down for iron pipe and fixed in repairs complete all as specified

S & F in repairs brass chromium plated towel rack fixed on wall complete all as specified and as directed.

S & F in repairs brass chromium plated towel ring fixed on wall complete all as specified and as directed.

S&F in repair soap dish, chromium plated, fixed to plugs with chromium plated brass screws complete all as specfied and as directed.

S&F in repairs brass CP shower rose 125mm size complete all as specified and directed.

S&F in repair toilet paper holder, brass chromium plated, fixed to walls with chromium plated brass screws complete all as specified and as directed.

S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified

S & F in repairs 15mm dia bib cock 2-way double handle with flange standard of CP any colour screwd for iron pipes and fixed complete all as specified and as directed.

S&F in repair 32mm dia PVC waste pipe for WHB and urinals complete all as specified and directed.

.M&L in repair 15 mm dia PVC connection 450mm longwith brass fly nut complete fixed in repairs

S&F rotational moulded polythene water storage tank of 500 ltrs capacity (cylinderical vertical with closed top)two layered with ISI branded hoisted and including all accessories (union, washer coupling etc) covers, connecting up pipes fixed in position all as specified in SSR Part - 1 including dismantling of water tank capacity 500 ltrs complete all as specified and directed.

S&F rotational moulded polythene water storage tank of 1000 ltrs capacity (cylinderical vertical with closed top)two layered with ISI branded hoisted and including all accessories (union, washer coupling etc) covers, connecting up pipes fixed in position all as specified in SSR Part - 1 including dismantling of water tank capacity 1000 ltrs complete all as specified and directed.

S&F rotational moulded polythene water storage tank of 2000 ltrs capacity (cylinderical vertical with closed top)two layered with ISI branded hoisted and including all accessories (union, washer coupling etc) covers, connecting up pipes fixed in position all as specified in SSR Part - 1 including dismantling of water tank capacity 2000 ltrs complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed

Steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS-1161-1979 Grade St-240 complete all as specified and directed.

M&L for 15 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete including taking up or down steel tubing and connections 15 mm bore complete.

M&L for 20 mm dia steel tube medium grade galvanized with all fittings and fixed complete in wall, ceiling or laid in floor complete including taking up or down steel tubing and connections 20 mm bore complete.

S & F in repair stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as directed by Engineer-in-Chage

S & F in repair drapery rod PVC coated 25mm internal dia with bracket incl decorative brass end knob etc and fixed on wall complete all as specified and directed

M&L Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to read of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.

M&L Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt dhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge.

Complete Removal of existing water proofing treatment any description up to concrete surface of roof slab including cleaning, with wire brushing, watering, removal of debris upto 1500 m distance complete all as specified and directed NOTE :- Unit rate quoted shall also include for removal of PVC water storage tank wherever existing carefully and refixing at the same or other position after completion of roof repair work

M&L for cleaning the new surfaces concrete with wire brushing and applying water proofing treatment as under:- (i) Apply oil bound bitumen primer @ 0.40 Litre/Sqm manufactured by the same agency as that of APP with density of 0.87 to 0.89 Kg/Litre at 25 degree cesius on the pepared dry roof surface. (ii) Laying torch applied APP polymer modified membrane 4mm thick with non-wooven ployster mat as reinforcement weighing n.less than 4.50 Kg/Sqm mineral finished by thermo fusion process all as decribed under particular specification The APP membrane shall be of:- (iii) Over the membrane, provide a finishing with two coats of Solar reflective bituminious aluminium paint @ 0.10 Kg/Sqm as prescribed by manufactures.

M&L for rendering 10mm thick cement plaster in CM (1:3) on roof top surface including WPC by weight of 3% of total cement content complete all as specified and as directed. Note : WPC will be measured separately

M & L PCC (1:2:4) type B-1 (using 20mm graded stone aggregate) as in roof/chajja padding for maintaining roof/chajja minimum slope 1:6 complete all as specified and as directed

S N TRADERS

M/s S.D Construction Co

M.K Enterprises

Shri Krishna Trading Corporation

M/s Vishwakarma Enterprises