Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹17.4 LAccepted-AOC 29 108 A STREET NO 10 VISHWAS NAGAR DELHI 110032 | DELHI | SHAHDARA | DELHI | 110032 | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹19.4 L+₹2.0 L (11.4%)Rejected-Finance | L2 | Rejected-Finance Not Lowest Bidder |
Tender Value
₹24.4 L
EMD Value
₹48,800
Closing Date
20 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE South Delhi Cantt 10
Garrison Engineer South Delhi Cantt 110010
Repair/Replacement to joinery and other allied works for Yoginder Vihar, IML and 1 CBPO under AGE B/R-I of GE (South) Delhi Cantt-10
2022_MES_547026_1
GE/DS-59/2022-23
Open Tender
Civil Works
Item Rate
270 days
GE South Delhi Cantt
Please refer Tender documents.
11 documents required · 11 mandatory
₹500
Yes
GE South Delhi Cantt
₹48,800
Yes
14 Nov 2022
23 Aug 2022
22 Sept 2022
23 Aug 2022
20 Sept 2022
6 Sept 2022
Amount
Taking down chowkhats or frames with shutter n.exc 1.5 sqm each but without taking off shutters from the frame complete all as specifed and directed by Engr-in-Charge.
Taking down chowkhats or frames with shutter exc 1.5 sqm and n.exc 4.00 Sqm each but without taking off shutters from the frame complete all as specifed and directed by Engr-in-Charge.
Taking down shutter of any description exc 1.00 sqm n.exc 2.00 sqm each complete all as specifed and directed by Engr-in-Charge.
Taking down shutter of any description and refixing in the same opening after minor repair to make fully functional of size exc 1.00 sqm n.exc 2.00 sqm each complete all as specifed and directed by Engr-in-Charge.
M&L 35mm thick 2nd class hardwood glazed and skelton shutter open rabated and prepare to receive gauge etc divided into square with plain, chamfered or rounded fixed with cut : mitered beads for receiving gauge etc complete all as specifed and directed by Engr-in-Charge.
S&F 35mm thick flush shutters solid core construction with block board core and plywood face panels, commercial type on both side complete all as specifed and directed by Engr-in-Charge.
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be coloured with heat mould plain coloured PVC'C channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stills and plain colour PVC sheet for top rail lock and botton rail either side and as gap insert for top rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specifed and directed by Engr-in-Charge.
S&F solid PVC doors & frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with 19mm MS square tube of 19 guage in opening as per specification & drg in SSR 2020 Part II complete all as specifed and directed by Engr-in-Charge.
S&F Steel windows with side hung shutters including box type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded incl taking down old complete all as specifed and directed by Engr-in-Charge.
All as per Srl item No. 9 above, but without glazing bars.
S&F framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars and similar conforming to Fe 290 Gde E-165 etc. complete all as specifed and directed by Engr-in-Charge.
S&F pressed steel frames for doors size 105X60mm with one or more rebates incl necessary fixing lugs hinges lock strike plate etc complete all as specifed and directed by Engr-in-Charge.
M&L for providing cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in hold fasts incl necessary form work complete all as specifed and directed by Engr-in-Charge.
M&L for providing cement concrete 1:3:6 type B-0 using 12.5mm graded stone aggregate filled in pressed steel frame/ chowkhat including necessary form work complete all as specifed and directed by Engr-in-Charge.
S&F in repairs 12mm thick prelaminatd partical board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for cubboard incl taking down old complete all as specifed and directed by Engr-in-Charge.
S&F in repairs IInd class soft wood (Area exc. 3 & n exc 6 Square cm) Plain fillets, square, rectangular or triangular in section, clean sawn, secured with nails or brads etc. complete all as specifed and directed by Engr-in-Charge.
S&F 100mm long butt hinges stainless steel complete all as specifed and directed by Engr-in-Charge.
S&F 100mm long butt hinges medium wt cold rold mild steel welded with existing frame complete all as specifed and directed by Engr-in-Charge.
S&F 150mm long aluminium anodised barrel tower bolt extruded section complete all as specifed and directed by Engr-in-Charge.
S&F 125mm long aluminium anodised cast type alloy handle complete all as specifed and directed by Engr-in-Charge.
S&F MS sliding door bolt 250mm long clip type stove enameled black with bright bolt not less than 12mm dia with incl min of 6 bolt and nuts four on bolt plate and two on stapple plate complete all as specifed and directed by Engr-in-Charge.
S&F for aluminium anodised 100mm long Hasp and Staple incl bolt to hinge plate and fixed with screws complete all as specifed and directed by Engr-in-Charge.
S&F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and avg aparture 1.18mm and fitted with tinned tacks or galvanised wire stapple complete all as specifed and directed by Engr-in-Charge.
All as per Srl item No. 23 above, but fixed in repairs complete.
S&F in repairs 100mm size butt hinges medium wt cold rolled MS through welding n.exc 2.5 cm in length over exc 6 mm thick of existing frame/chowkhat incl taking down shutter and refixing in same position and making good/functional incl supply of butt hinges complete all as specifed and directed by Engr-in-Charge. Note : The rate quoted by the tenderer are deemed to be included for taking out existing butt hings and S&F of new hings by welding.
Hacking out old broken glass of any size, thickness, quality or description from metal frame nexc 1.5 sqm each complete all as specifed and directed by Engr-in-Charge.
S&F 3mm thick sheet glass ordinary quality and glazing with oil putty / wooden beads in squares not exec 0.5 sqm each pane complete all as specifed and directed by Engr-in-Charge.
All as per Srl item No.27 above, but figured glass pin headed type.
M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specifed and directed by Engr-in-Charge.
M&L preparing of new steel surfaces of any description not otherwise described, over 10 cm width or girth & applying Two coat of synthetic enamel paint over a coat of red oxide primer complete all as specifed and directed by Engr-in-Charge.
Taking down cement plaster of any description incl raking out joints hacking for keys and scrubbing down with water etc. complete all as specifed and directed by Engr-in-Charge.
M&L for 15 mm thick rendering with Readymix plaster (as per manufacturer's instructions) on fair faces of brick work or concrete surfaces finished even and smooth surface without using extra cement on wall and ceiling of up to four storied bldg complete all as specified and directed by Engr-in-Charge. Notes:- 1. Make of readymix plaster shall be Birla Aerocon/Ultratech Readiplast/ACC Accoplast/Fosroc Chemical (India) Pvt Ltd Renderoc and as approved by GE. 2. The readymix plaster shall be procured directly from the manufacturer or from their authorised dealer. 3 The contractor shall produce original purchase voucher alongwith test certificate of readymix plaster while claiming RAR/ Final Bill. 4. The Engr-in-Charge shall verify the genuineness of these purchase vouchers before endorcing.
M&L for preparation of new surfaces of walls and applying two coats of cement base paint complete all as specifed and directed by Engr-in-Charge.
M&L preparation of newly plastered surfaces on walls complete and applying two coat of oil bound distemper over wall care putty complete all as specifed and directed by Engr-in-Charge.
Attending complaint for petty repair to easing of Doors/Window/Cup Board shutters by tightening of hinges / handles / Al-drop bolt / tower bolt / knobs, hasp and stapple etc of any size/any number of panels for easy closing / opening or changing the position of hinges, adjustments of tower bolts,sliding bolts, replacement of looking mirror etc complete including replacement of major defective item if required, complete all as directed and as specified.
Note:- 1. The contractor shall make all arrangement for attending the different types of complaints area on day to day basis. Any major item required to be replaced with new one, to make the system functional shall be measured and paid for separately as "M&L or S&F" under respective item of this schedule. Old retrieved item(s) as considered in 'Schedule of Credit' shall become property of the contractor. Contractor has to provide minimum one plumber with helper including all necessary T&P on all working days from 9AM to 5PM. Additional workers can be engaged if nature of work required to be completed within fix time frame as desired by the GE. Rate shall be quoted accordingly against these items, keeping in mind above said provisions. 2. Contractor shall provide minimum one carpenter with helper including all necessary T&P on all working days from 9AM to 5 PM .Additional workers can be engaged if nature of work required to be completed with in fixed time as desired by GE . Rate shall be quoted accordingly . Keeping in mind above said provisions. 3. Where material provided shall be paid as "S&F underrespective item of Sch. 'A' the payment of complaint under this item shall not be paid. 4. Based on complaint received from users. Concerned JEs shall deploy the tradesmen in same day through Job slip (complaint slip) and the contractor shall ensure that the complaint are to be attended and rectified in same day and complain slip shall be got signed by users with date. Non compliance (not attending) the complaint in same day a panel recover of Rs.100/Per complaint shall be made from contractors due (claims). 5. The contractor shall provide job slip serially machine numbered, attendance register and complaint registered, and the rate quoted by the tender shall deemed to be included for these provision. 6. These document may be asked to produce at the time of payment of RAR/Bill.
S&F in repairs 150 mm aluminium anodised handle cast type complete all as specifed and directed by Engr-in-Charge.
S&F in repairs 150 mm tower bolt, aluminium anodised complete all as specifed and directed by Engr-in-Charge.
S&F in repairs 100 mm Hasp and staple, safety type, aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specifed and directed by Engr-in-Charge.
S&F in repairs 25 mm bore mild steel 0.8mm wall thickness with PVC ribbed lamination for curtain rods with bracket holder & PVC golden finish end knobs (Two number for each curtain rod of any length) complete all as specifed and directed by Engr-in-Charge.
M&L welding in repairs exc 2.5 cm and n.exc 5 cm in length in any situation and in any position such as hinges and similar articles etc for steel door, gates, window, ventilatiors and grills etc for upto four stoery building complete all as specifed and directed by Engr-in-Charge.
S&F in repairs floor door stopper of aluminium alloy body and tongue,anodised,with hard drawn steel spring of 140 mm size with vulcanised rubber piece. complete all as specifed and directed by Engr-in-Charge.
S&F in repairs steel window handles (right & left) and peg stays etc as per sample complete all as specifed and directed by Engr-in-Charge.
Note:- The contract sum shall be after deducting the amount of Credit shown in Credit Schedule of this Tender.
M/S.M.S.Devi.Const.Co
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .