Raising of Boundary Wall Near Colony Gate No. 01 to Near Shiv Mandir at 400KV S/Stn. BBMB Panipat

Amount

Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres

Dismantling barbed wire or flexible wire rope in fencing including making rolls and stacking within 50 metres lead.

Dismantling steel work in built up sections in angles, tees, flats and channels including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead.

Dismantling concrete (d) Cement concrete plain1:2:4 mix

Cement concrete 1:8:16 a) With brick ballast 20mm gauge (i) mixing by manual means

First class burnt brick work laid in cement sand mortar 1:6 in first storey upto 4 metres above plinth level

Steel work fixed independently without connection plates including cutting hoisting and fixing in position (c) Tees angles & channels( angle Size 50x50x6mm)

Welding by gas or by electric plant, includingcarriage to and from workshop etc.

Cement concrete 1:2:4(a) With stone ballast or shingle(i) mixing by manual means

Scraping (c) Cement plaster

20mm thick cement plaster 1:4 in two coat work

12.5 mm thick cement plaster 1:4

Cement pointing 1:3 deep variety

Fixing glass pieces on top of walls.

Providing and fixing concertina coil fencing with punched tape concertina coil 600 mm dia 10 meter openable length (total length 90 m), having 50 nos rounds per 6 metre length, upto 3 m height of wall with existing angle iron ‘Y’ Shaped placed 2.4 m or 3.00 m apart and with 9 horizontal R.B.T. reinforced barbed wire stud tied with G.I. staples and G.I. Clips to retain horizontal, including necessary bolts or G.I. barbed wire tied to angle iron, all complete as per direction of engineer-in-charge, with reinforced barbed tape (RBT)/Spring core (2.5 mm Thick) Wire of high tensile strength of 165 Kg./Sqm. with tape (0.52 mm thick) and weight 43.478 gm./Metre (cost of MS angle, CC blocks shall be paid separately

Finishing walls with exterior decorative cement based paint such as snowcem, robbicem etc. two or more coats to give an even shade

Applying priming coat with metal primer on new steel or iron work including preparation of surface.

Painting two or more coats with anticorrosive bitumastic Paint to give an even shade

SINGHLA BUILDERS (BID ID -932921)

DHARAM PAL AND COMPANY (BID ID -940328)

SATYAM CONSTRUCTION CO. (BID ID -925560)