Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹2.8 LAccepted-AOC | ₹2.8 L | L1 | Accepted-AOC Work order issued |
Tender Value
₹2.7 L
EMD Value
₹5,472
Closing Date
29 Jul 2023, 3:30 pmClosed
Executive Engineer,
Buildings and Roads Division, Public Works Department, Karaikal
Reconstruction of compound wall and sump including face lifting to the Health and Wellness centre at Melaoduthurai village, Neravy Commune Karaikal.
2023_PWDC3_13231_1
11-05/PW/BRK/2023-24
Open Tender
Civil Works
Item Rate
60 days
Karaikal
Please refer Tender documents.
6 documents required · 6 mandatory
₹525
₹5,472
4 Sept 2023
21 Jul 2023
31 Jul 2023
21 Jul 2023
29 Jul 2023
21 Jul 2023
Amount
Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5m, including getting out the excavated soil and disposal of surplus excavated soil as directed , within a lead of 50m - all kinds of soil
Supplying and filling in plinth with river sand under floors, including watering, ramming consolidating and dressing complete
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size)
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - all work upto plith level - 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size)
Providing and laying in position specified grade of reinforced cement concrete , excluding the cost of centering , shuttering , finsishing and reinforcement - All work upto plinth level 1:1.5:3 (1cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)
Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size)
Reinforced cement concrete work in beam, suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, satircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:1:5:3 ( 1 cemet:1.5 coarse sand: 3 grsded stone aggregate 20mm nominal size)
Centering and shuttering including strutting , propping etc and removal of form for - foundations, footings, bases of columns etc for mass concrete
Centering and shuttering including strutting , propping etc and removal of form for - Walls (any thickness ) including attached pilasters, butteresses , plinth and string courses etc.
Centering and shuttering including strutting , propping etc and removal of form for - Suspended floors, roofs, landings , balconies and access platform
Centering and shuttering including strutting , propping etc and removal of form for - Columns , Pillars , Piers , Abutments , Posts and Struts
Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars (TISCON / VIZAG / IISCO / SAIL / JSW) Fe - 415 or more
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level - cement mortar 1:4 (1 cement : 4 coarse sand)
Steel work welded in built up sections / framed work , including cutting,hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required - in gratings, frames, guard bar, ladder, railings, brackets,gates and similar works
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc . complete - 40mm thick with 20mm nominal size stone aggregate
12 mm cement plaster of mix 1:4 (1 cement :4 course sand)
15mm cement plaster on rough side of single or half brick wall of mix - 1:4 (1 cement : 4 coarse sand)
6mm cement plaster of mix 1:3 (1 cement : 3 fine sand)
18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement : 4 fine sand ) - raised band
Applying one coat of water thinnable cement primer of approved brand and manufacturer on wall surface - water thinnable cement primer
Painting steel work with deluxe multi surface paint to give an even shade. Two or more coat applied @ 0.90 ltr / 10 sqm over an under coat of primer applied @ 0.80 ltr / 10 sqm of approved brand and manufacture
Repairs to plaster of thickness 12mm to 20mm in patches of area 2.5 sq.metres and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 metres lead - with cement mortar 1:4 (1 cement : 4fine sand)
Raking out joints in lime or cement mortar and preparing the surface for repointing or replastering , including disposal of rubbish to the dumping ground within 50 metres lead
Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska - with F.P.S. brick tiles
Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scrarches etc.complete
Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade - One or more coats on old work
Applying of multi surface Nano-Scaling system with organosilane based reactive water proofing agent (Zycosil plus or equivalent ) Nano sealer duty mixed with (acrylic based sealing bonding admixture ( Zyco prime or equivalent ) mixed in the proportion as recommended by the manufacturers with potable water (1000 ppm ) on the prepared surface of masonry/ concrete.The rate to include the cost of preparing the surface by chipping, cleaning the bulged/loose concrete/mortar removing smooth by sand paper/stone and fanning/blowing the dust by air compressor, preapring the solution in manufacture's recommended proportion and applying on the surface dirrected by the Engineer-in-charge.
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .