Providing and Fixing Bird Spikes in HQ Building and anti bird net in Hangars at HAL Factory Kanpur.

Providing and Fixing Polycarbonate spikes up to 14-meter height (approx.) with UV – resistant base & weather resistant. Non harmful to bird, simply creates an uncomfortable surface size 4.50 inches’ height & 12” length to deter various bird size effectively. Installation method high quality adhesive (silicone) application on cleaned and prepared surface, with labour, material, surface cleaning, scaffolding etc. all complete works as per direction of EIC. Note:- In areas where silicon application is not feasible, screws/wires may be used after approved from EIC. (Spikes Sample to be approved by EIC.)

Providing and laying white colour Bird control high-density polyethylene (HDPE) white Nylon knotted anti- bird net Garware make or equivalent in Hangar trusses (upto 14 meter height approx) 25mm square mesh size & 1mm thickness suitable for preventing entry of targeted bird species UV stabilized for durability, light weight yet durable construction. Resistant to environmental factors such as Sunlight and rain, installed using tensioned cables or hooks, ensuring a secure fit. with labour, material, scaffolding etc. all complete works as per direction of EIC. Note - Sample to be approved by EIC.

Description of Item

Earth work in excavation in ordinary soil in trenches, not exc.1.50m depth and of any width, for foundation & other similar allied works etc. including cost of dressing / trimming sides and leveling / grading and ramming of bottoms of excavation, dewatering etc if required, getting out and return filling with excavated earth in layers of not exceeding 25cm thick including watering consolidating etc. & disposing the surplus excavated earth in the low lying area of factory within a lead of 500 mtrs etc. complete as directed &approved by EIC.

Providing and laying Plain cement concrete in 1:4:8 (1Cement : 4 Coarse sand: 8 stone aggregate of 40 mm nominal size) in foundation, floor or any description of work including cost of all operations such as manual / mechanical mixing, placing, compacting, scaffolding, side shuttering, curing etc . Complete as directed by EIC.

Providing and laying brick work in walls, pillars, fascia, drain etc. in cement mortar 1:6 (1 cement : 6 coarse sand) in well burnt clay bricks, First class bricks, straight or curved in plan of any radius, in foundation and super- structure, work up to any height or depth including cost of scaffolding , raking out joints up to 1 cm depth as the work proceeds, curing etc. complete in all repect as per specification and direction of EIC.

-- do-- but half brick thick wall in CM 1:4. All complete as directed and approved by EIC.

Providing, rendering, screeding and dubbing out plaster in cement mortar 1:3 (1cement: 3 Coarse Sand) of 5 mm thick on concrete surfaces at any height / depth of ceilings, column, beams, staircase, fins, fascia , drop etc. including trowelled to smooth and even finish without using extra cement, including cost of surface preparation, required scaffolding, curing etc. complete as directed & approved by EIC.

Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirting, drip moulds and similar work not exceeding 15cm in width or grith; including cutting to edges, all mitres and stopped ends etc. all complete as directed and approved by EIC.

Supplying and fixing in position steel reinforcement (TMT bars) conforming to IS-1786-1985 of any dia of approved make such as TATA/SAIL/ISPAT/VIZAG for slabs, beams, columns, footing or any other similar description of work, including cut to length, bent to shape as required, cranking bending , spirally or hooping, hooking ends and binding with mild steel wire soft drawn of not less than 0.9 mm dia, securing with chairs, placing in position and maintaining firmly so that placing and ramming of concrete will not displace it, removing rust and scales if any, wastage, etc. complete as directed & approved by EIC (Test report of manufacturer is to be submitted along with the supply).

Providing and laying R.C.C 1:1 1/2:3 (1Cement : 11/2 Coarse sand: 3 stone aggregate of 20 mm nominal size) for foundation, beam, columns, lintels etc. or any description of work including manual / mechanical mixing, placing, compacting, lead & lifts, curing etc . Complete as directed by EIC.

Providing and laying Ready Mixed cement Concrete ( Design Mix M-25 grade ) in slab, floor, pavments or simlar items, RMC (Ready Mixed Cement Concrete M- 25 grade, using 20mm graded granite aggregate and consolidated with mechanically vibrated needle and surface /screed vibrators and curing. Design mix to be got approved from EIC. If any additional quantity of cement over and above the minimum quantity of 300 Kgs per Cum is required as per the design mix/trial mix to achieve the specified strength, cost of the same shall be borne by the contractor. Note: Design Mix to be got approved by EIC before the work.

Providing and laying Plain cement concrete 1:2:4 (1 cement :2coarse sand : 4 stone coarse 12.5mm aggregate downgraded) 25mm thick in drain foundations, floors or in any description of including manual / mechanical mixing, placing, compacting, curing scaffolding, form work finishing the surface even and smooth using extra cement all complete as directed & approved by EIC.

Supplying & fixing two track powder coated glazed Aluminium bombay sliding window all complete with outer frame of 63 x 38 x 2 mm Aluminium section and two track channel (Bottom / top &sides) of size 62 x 32 x 1.2mm, sliding shutters made of special Bombay sliding window section 38 x 19 x 1.2mm, All complete with 5mm thick float glass of MODI/ SAINT GOBAIN, edges wrapped in rubber beading, two nos roller of flyrail , including providing and fixing powder coated aluminium grill , powder coated Aluminium Handle & locking arrangement etc. all , complete with labour material, wastage etc. all complete as directed & approved by EIC.

Providing and fixing powder coated Aluminium grill having weight not less than 2.0 Kg/m2 of approved make such as (HINDALCO/JINDAL/INDAL) of approved design to the existing outer frame of Bombay sliding window including required fittings such as 'Y' channel all around the frame for properly securing the aluminium grill including circular cutting wherever directed for provision of Air cooler, all complete with cutting wastage etc. compete in all respect as per specification and direction of EIC .

Providing, manufacturing and erecting partly glazed and partly panelled powder coated Aluminium parititions using standard sections of JINDAL, HINDALCO or equivalent as per approved design and drawing with bottom panel of 12mm thick prelaminated exterior grade particle board of reputed manufacturers such as Archid, Kitlam, Century confirming to 12823 and top panels with 5mm thick float glass as detailed below including necessary cleats, Screws, fastners etc., a) Top, middle, vertical and bottom members -100x 44 x2mm of weight 1.519Kg / RM forming grid not exceeding 1.00 Sqmt panel as approved. b) Glass - 5.00mm thick plain float glass of MODI / SAINTGOBAIN or equivalent c) Bottom Panels 12mm thick prelaminated exterior grade in top panal particle board. d) Rubber gaskets - Good quality of approved make e) Glazing clips - Weight of 0.097Kg/RM.

Supplying & fixing acid proof non skid ceramic tiles of size 400x400mm x 9 mm thick (Approx size) in floor etc of Kajaria, Johnson & Johnson, Orient Bell, Somany, Nitco make etc of first quality (tiles sample as approved by EIC) for floors including providing and laying 15 mm nominal thick cement mortar screed bedding layer of CM 1:4 ( 1 cement : 4 coarse sand ) and fixing tile with cement slurry, over the existing floor, and preparation of surface by wire brush cleaning and wetting the surface with water and spreading cement slurry, including cost of raking the joints and pointing with tinted white cement, curing, cleaning including cutting of tiles, wastage and disposal of debris at directed place etc. complete as directed by EIC. [Note:- Tile sample to be got approved by EIC before laying].

Supplying and fixing glazed ceramic wall tiles of first quality of reputed manufacturers such as Kajaria, Johnson & Johnson/ Orient Bell/ Somany/ Nitco tiles in dado and skirting of size (450x350x 7)mm thick or bigger size with 10 mm thick cement mortar screed bedding layer 1:4 ( 1 cement : 4 coarse sand ) cost of raking the joints and pointing with white cement mixed with matching tint finishing wall ( matching with floor tiles colour) / make all complete as directed & approved by EIC.

Providing & laying ultra tiles VENTURA-T of size 300 x 300 mm of approved design and shade in Treads and laid over 15mm thick cement mortar 1:4 bedding layer jointing with cement slurry matching the shade & pointing with white cement & pigment complete with labours, material wastage etc. as directed & approved by EIC.

--do-- but VENTURA-R of size 152 x 300 mm for staircase risers over 15mm thick cement mortar in CM 1:4 complete all as directed & approved by EIC.

Providing & applying two coats oil bound distemper of approved colour with one coat of alkali resistant primer all of approved make such as Asian / Berger/ ICI or equivalent conforming to IS 428-1969 to walls, ceiling or of any description at any height, including providing and applying Birla white/Latafinish/JK white wall putty as per requirement of site for making surface even and smooth complete with cost of all materials, labour, wastage, safety measures, scaffolding, staging etc. as directed & approved by EIC.

Providing & Applying two coat of premium acrylic silicon based weather resistant exterior paint including one coat of exterior primer such as weather coat long life / weather shield / Apex of reputed manufacturer including providing and applying Birla white/Latafinish/JK white/Myklatirat wall putty @ 0.40 Kg / Sqm for making surface even and smooth. All complete with labour, material ,required scaffolding, brushes and other tools & plants required for proper completion of work cleaning the splashes from door, windows and from other surfaces etc.complete as directed & approved by EIC.

Supplying and fixing 110mm PVC, SWR single socketed pipe in any length with rubber ring joint laid in trenches or in floors for soil waste of approved make such as Supreme Kisan, Finolex, Prince or equivalent Conforming to IS: 4985-2000;(Class - 4) of complete with all required necessary fittings for fixing etc. complete as directed & approved by EIC .

Supplying and fixing PVC (SWR) bends of 110mm with access door socketed of Supreme, kisan, Finloex, Prince (ISI make) etc complete as directed & approved by EIC.

Sand filling under floors or in foundations including watering and consolidation, complete as directed & approved by EIC.

Supplying & filling with aggregates of gauge 40 to 80mm broken stone or boulders in pits/ wells in layers including lead, lift, T & P etc. complete as directed & approved by EIC.

Drilling of 200mm dia boring hole 2m deep from ground level in soil including all tools & machinery and disposal of spoil upto a lead of 50m within the premises of factory etc. complete as directed & approved by EIC.

Drilling of boring hole 200mm dia after 2 meter depth including all tools & machinery tools and disposal of spoil upto a lead of 50m within the premises of factory etc. complete as directed & approved by EIC Rate also included for making strata chart to be made for making slots in ribbed pipe.

Supplying & fixing 160mm dia PVC pipe of pressure rating 6 kg/ cm2 of approved make such as Supreme / Finolex / Prince (ISI make) with socket and fittings for complete job etc. complete as directed & approved by EIC.

Supplying & fixing 160mm dia PVC ribbed screen sloted pipe of pressure rating 6kg/ cm2 of approved make such as Supreme / Finolex /Prince (ISI make) with socket and fittings for complete job etc. complete as directed & approved by EIC. (Slot will be made in accordance with strata chart).

Providing & applying flush pointing in CM 1:3 in brick wall including raking out joints complete as directed & approved by EIC.

Supplying & Fixing cast iron work grade FG 150, unmachined, in gratings and similar articles exc. 5.00kg/each and as directed by EIC.

Providing, rendering , screeding and dubbing out in cement mortar 1:6 (1cement: 6 graded coarse sand)10mm thick, on rough or fair faces of brick/ concrete surfaces at any height / depth on wall, ceiling, fascia, etc. including trowelled to smooth and even finish without using extra cement, including cost of surface preparation , scaffolding, curing etc. complete as directed by EIC.

Supplying & fixing non-skid ceramic tiles of approx. size 400x400mm x 7-9 mm thick in floor, of reputed manufacturers such as Kajaria, Johnson & Johnson, Orient Bell, Somany, Nitco make of first quality , including providing and laying 15 mm nominal thickness cement mortar screed bedding layer of CM 1:6 ( 1 cement : 6 coarse sand ) and fixing tile with cement slurry and preparation of surface by wire brush cleaning and wetting the surface with water and spreading cement slurry. including cost of raking the joints and pointing with tinted white cement, curing, cleaning the tiles, including cutting of tiles, wastage and disposal of debris at directed place etc. complete as directed & approved by EIC. [Note:- Tile sample to be got approved by EIC before laying].

Supplying and fixing glazed ceramic wall tiles of first quality of reputed manufacturers such as Kajaria, Johnson & Johnson/ Orient Bell/ Somany/ Nitco tiles in dado and skirting, of size (450x350x 7)mm thick with cement slurry over sub- base of 10 mm thick cement mortar 1:4 ( 1 cement : 4 coarse sand ) cost of raking the joints and pointing with white cement mixed with matching tint finishing wall ( matching with floor tiles colour) / make all complete as directed & approved by EIC.

Supplying and fixing in position set of coloured Glazed Vitreous China make oval shaped counter top wash Basin of Parryware or equivalent (design & colour as approved by EIC) of size 550 x 450 mm approx. including cost of 32 mm dia CP brass waste coupling, CP swan neck pillar cock, CP angle valve, CP bottle trap all CP fittings of Parryware / Plumber or equivalent make , complete in all respect as directed & approved by EIC.

Supplying and fixing urinal partition black granite on both side finish 18 - 20mm thick machine cut of size 90 cm X 50 cm (approx.) or required size to bedded and jointed grouted on wall in CM 1:2 and finishing edges with white cement and admixture pigment to match the shade of granite stone including cutting forming, round edge beading moulded in granite with polish complete in all respect including all labour, materials, T& P as per direction of EIC.

Supplying and fixing Red granite wash basin platform 20mm thick, one side polished, machine cut of required size to accommodate two oval shape wash basins, including making oval shape opening for two W.B. as per size of wash basin providing and laying bedding mortar in CM 1:4 , 15 mm and finishing & polishing the edges of granite and pointed with pigmented white cement to match the shade of granite stone including cutting forming, round edge beading moulded in granite with polish complete in all respect including all labour, materials, T& P as per direction of EIC.

Providing and Fixing coloured Vitreous Chinaware coloured new magnum Urinal of Parryware or equivalent of size 635mmX395mmX420mm complete with providing and fixing plugs, bedding urinals in wall in cement mortar 1:2 ( 1 cement : 2 coarse sand), securing urinals to plugs with 60 mm long S.S screws, pointing around urinals back in cement. Complete with the following system:- (a) Providing & fixing 50mm PVC Pipe supreme make or equivalent about 750mm long concealed vertically in wall & reparing the wall with CM (1:3). (b) Providing & fixing CP Brass waste couplings and jointing with waste pipe & put in concealed pipe. (c) Providing & fixing 15mm CP Brass half turn fancy flush cock, to water line including all fittings fixture with CP Cover plate. (d) Providing & fixing CP spreader of make Parryware or equivalent 15mm dia with CP Pipe connector to urinal, all complete with required fitting & fixture T- elbow, Grating of C.P. Union, jointer connector etc. for proper functioning of urinal complete in all respect as directed & approved by EIC.

Supplying & Fixing in position coloured European Water Closet of vitreous china with 'P' or 'S' trap left or right bent of Parryware make or equivalent as per direction of EIC, with plastic seat cover and lid fixed with CP brass hinges and rubber buffers. Fixing of 10 litre capacity Plastic flushing cistern of Parryware Deluxe model make complete with all accessories such as inlet, ball valve, float, 15 mm dia PVC pipe connection,40 mm dia PVC flush pipe bent to shape with necessary connections, fittings and clamps PVC connection with union 15 mm dia overflow pipe with specials, providing and fixing 15 mm dia GI connections, GI over flow pipe with specials including cutting chases and finishing in walls after embedding of pipes , floors etc , where required with Cement mortar 1:3 ( 1cement: 3coarse sand )all complete including cost of painting of brackets( with red oxide primer and two coat of synthetic enamel paint).

Supplying & Fixing factory made PVC solid panel door shutter 30 mm thick of approved manufacturer such as Rajshri Plastiwood/ Syntex/Polypan or equivalent brand factory made solid panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19mmx19 mm for stiles & 15 mm x 15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame shall be covered with 5 mm thick heat moulded Rajshri /Syntex/Polypan PVC 'C' channel of size 30x50 mm forming stiles, and 5 mm thick, 75 mm wide PVC sheets for top rail, lock rail & bottom rail on either side, and 10mm (5mmx2) thick, 20mmwide cross PVC sheet as gap insert for top rail & bottom rail. Panelling of 5 mm thick PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with 30 mm wide x5mm thick PVC sheet beading on either side, and join together with solvent cement adhesive.. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' channel using PVC solvent cement adhesive etc. complete as per direction of E -I-C, manufacturer's specification & drawing. Including all fittings such as aluminum tower bolt 150mm long 2 Nos.: Sliding door bolt 200mm long 1No & aluminum handle 100mm long 2no in each shutter as directed & approved by EIC.

Supplying & Fixing factory made polyvinyl chloride (PVC) Door Frame of approved manufacturer such as Rajshri Plastiwood / Syntex/ Polypan of size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm rigid PVC foam sheet, mitre cut at two corners and joined with 2 nos. of 150 mm long brackets of 15x15mm M.S. Square tube. The two vertical door profiles are to be reinforced with 19x19 mm M.S. Square tube of 19 gauge,EPDM rubber gasket weather seal to be provided through out the frame. The door frame shall be fixed to the wall using 65/100 mm long M.S. Screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member & minimum 2nos. For horizontal member etc. complete as per manufacturers specification and direction of EIC.

Supplying & Fixing in position tilling /adjustable type LOUVERS of size 600 x 600mm, Louver strip fixed over aluminium frame made of powder coated aluminium section of 63 x 38 x 2mm and fixing of 3.00mm thick and 100 mm wide pinheaded glass strip etc. Complete as directed and approved by EIC.

Supplying & Fixing Aluminium powder coated barrel tower bolt 200 mm long size of extruded section of approved qualtiy (ISI mark) with all accessories which is required and complete in all respect as directed & approved by EIC.

Supplying & Fixing Aluminum powder coated 150 mm long Handles (dull finish cast type of good quality having ISI mark) to each door shutter all complete as directed & approved by EIC.

Providing and fixing medium weight, cold rolled steel Butt hinges of 100 mm size fixed with screws for doors, windows etc. all complete with labour, material and fixing to wooden / MS frame, making cut outs in wooden frame for fixing hinges etc. complete as directed by EIC.

Supplying and Fixing of CP brass two way bib cock for 15 mm dia pipe of Plumber / GEM / L&K or equivalent approved make, including jointing with water supply lines, complete as directed by EIC .

Supplying and Fixing of CP brass long body fancy type bib cock for 15 mm dia pipe of Plumber / GEM / L&K or equivalent and approved make, including jointing with water supply lines, complete as directed by EIC .

Supplying and fixing of CP brass angle cock / valves of Plumber / GEM / L&K make for 15 mm dia pipe including jointing with water supply line and all complete operation for fixing including required accessories etc. complete as directed by EIC.

Supplying and fixing 580 x 440 mm light coloured glaze porceline Indian water closet (Orissa Pattern) confirming to IS:2556 of make parryware or equivalent with'P' or 'S' trap with or without vent set, including supplying and fixing 10 Ltrs. Capacity valve less syphonic action type low level PVC cistern confirming to IS : 774, with brackets, 40mm dia PVC waste pipe with coupling, 15mm dia high density PVC inlet pipe connection, 15mm dia CP angle cock of parry ware all above of approved make, colour etc complete as approved, specified and directed by the EIC.

Supplying and fixing of good quality bevelled edge looking mirror of 5mm thickness of approved manufacturer such as Modi Atul , saint -gobain etc of any size with AC Sheet backing and 1" wooden beading all round edges, all complete as per direction of EIC.

Supply & fixing of G.I. water tubing 15 mm dia (Galvanized Iron) TATA/ JINDAL/ ZENITH make of medium grade in required lengths with screwed socket joints, together with all tube, fittings (Such as bends, elbows, tees, short pieces, connectors back-nuts, diminishing pieces, caps, plugs and unions etc.) and fixing complete with clips, wall hooks, wooden plugs at suitable intervals including cost of cutting through walls, floors / roofs etc and their making good, laying in trenches etc. Also for cutting, screwing and waste, and for making forged bends on piping as required, connectors shall be inserted, where required or as directed by EIC.

---do as above but 25 mm dia.

Supplying and fixing C.P Liquid soap Dispenser of any approved make/ branded hand push types including all fixing accessories and operations etc. complete as directed & approved by EIC.

Supplying and fixing PVC floor trap 75 mm dia. of approved make such as supreme / Finolex/ Kisan/ Prince (ISI mark)with grating including jointing to waste PVC pipes with cement concrete 1:2:4 etc. complete as directed & approved by EIC.

Supplying and fixing 110mm/ 75mm PVC, SWR single socketed pipe in any length with rubber ring joint fixed to walls, laid in trenches, under floor for soil waste of approved make such as Supreme Kisan, Finolex, Prince or equivalent Conforming to IS: 4985-2000;(Class - 4) complete with all required necessary fittings for fixing etc. complete as directed & approved by EIC for following dia. pipes

110 mm dia.

75 mm dia.

Supplying and fixing PVC (SWR) Junction single 'T' equal or unequal with access door for following dia. of Supreme, Kisan, Finolex, Prince (ISI make) etc. complete as directed & approved by EIC.

110 mm dia.

75 mm dia.

Supplying and fixing PVC (SWR) bends of any radius with access door for following dia. of pipes of Supreme, kisan, Finloex, Prince (ISI make) etc complete as directed & approved by EIC.

110 mm dia.

75 mm dia.

Supplying and Fixing PVC(SWR) reducer 110 x 75 mm of Supreme, kisan, Finolex, Prince make etc. complete all as directed & approved by EIC.

Supplying and Fixing PVC(SWR) vent cowls 75 mm dia of Supreme, kisan, Finloex, Prince (ISI make) etc. complete all as directed & approved by EIC.

Supplying and fixing PVC water tanks of make Sintex/ Polycon/ Tirupati / Supreme rotational moulded polythelene water storage tanks 1000 Ltr. cylindrical vertical with closed top hoisted and fixed to position, three layer body, including providing and fixing PVC ball cock, tank connection and all required G.I. fittings etc. complete as directed and approved by EIC.

Providing and fixing to chowkhat 30 mm thick, single leaf, factory made flush door shutter conforming to IS- 2202( Part-I)-1983, of G-door, Minar, Swastik, Shatabadi make and ISI marked, solid core construction, with block board core and commercial types veneers face on one sides and other face is covered with decorative face veneer with lipping/frame to match etc. complete , flush door shall be free from twist or wrap in plane etc. including provision of suitable blocks for interlocks, latches or other fittings etc. complete as directed & approved by EIC.

Providing and fixing CP Brass health faucet with telephonic arrangement and hook etc. of Plumber / GEM / L&K/ or any other equivalent make complete with required fittings & accessories as per direction of EIC.

Supplying & fixing C.P Bottle trap of Plumber / GEM / L&K or any other equivalent brand etc. complete and approved by EIC.

Supplying erection & fixing of sliding door of aluminium powder coated of vertical, top middle & bottom rails of section 100 x 44 x 2mm and stiles of Sec. 83 x 44 x 2mm including supplying & fixing of top panel with 5mm with figured glass, pinhead type & bottom panel with 12mm botttom pre-laminated board including cost of handle, lock, glazing clip, rubber beading, G.rails and sliding roller for sliding door Complete as directed & approved by EIC.

Supplying, fabricating and fixing Stair (framed) including stringers, treads, landing, railings, balusters, hand rails etc. including cleats, brakets, etc. including one coat of red oxide primer providing metal putty and sand papering for making the surface smooth and two coat of first quality synthetic enamel paints, complete all as directed & approved by EIC.

Providing, centring & shuttering for the sides and soffits of suspended slabs, lintels, beams, floor slabs, landing and similar work of any description, in required shape and size, with true line & plumb etc. with plywood, MS plates shuttering including oiling of the top surfaces of shuttering , all supports with MS or wooden braces, struts, balli, etc, including working scaffoldings, ladders, gangways as required, including removal of formwork & centring after the stripping period as described in MES-SSR- part-I & IS 456 2000 , etc complete as directed and approved by EIC.

Appendix ‘A’

Registering Authority

Fax No.

Email Address:

GSTIN (Copy to be attached)

Tel No.:

Fax No.:

Registration Number

Name of Employer

Bank’s Reference and Date

Annual Turnover (Rs. In Lakh)

Name of the Work

Name of the Work

Name of the Work

drawn on Bank:

as EMD

Designation: