Gomti nagar yojna vinay khand me bhavan sankya-5/179 se dayal chaurahey tak jarjar brick work nale ka RCC nale ke madhyam se sudhrikaren ka karya.

Dewatering of trench by pramp including pump operator, fuck, T&P esc. required for proper completion of work. LDA Approved 3

Close tombering in trenches including strutting, shoring and packing cavities (wherever required) complete (Measurements o be taken of the face area timbered), Depth exceeding 3 m but not exceeding 4.5 m DSR 2.16.3

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m., All kinds of soil. DSR 2023-2.8.1

Providing and Fixing in weep holes 110 mm dia pipe P.V.C. Pipe Complete in all respect as per direction of E/I (PWD SOR-2020/Ch-Material Item No. 31) (Rs. 230+5% CP) LDA APROVED2

Cartage of earth 10 km distance from site. DSR 2023/1.1.2

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work up to plinth level, 14:8 (1 Cement 4 coarse sand (zone-(11) derived from natural sources: 5 graded stone aggregate 40 mm nominal size derived from natural sources). DSR 2023-4.1.8

Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement, 1133(1 cement: 1.5 course sand zone-III)derived from natural sources: 3 graded stone aggregate 20 mm nominal size derived from natural sources) DSR 2023-5.2.2

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete DSR 2023-5.9.1

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.DSR 5.9.2

Mild steel or iron work in plain work such as in R.CC or RB (when not included in an over all rates) including bending for proper completion of the work and inchading supply of steel and its wastage, bends, hooks and authorised overlaps shall be measured up to floor two level L.D.A. APPRO.

Centering and shuttering including strutting, propping etc., and removal of form for, Suspended floors, roofs, landings, halconies and access platform DSR 5.9.3

Deduction of saleable Brick all complete(Supply rate+10%in 2020-21 Deduction B/W 20-21

Providing and applying white cement based putty of average thickness i mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete DSR 13.80

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. DSR 2023-13.62.1

Construction of granular sub-base by providing coarse graded material, spreading in uniform layer with motur graded on perpared surface, mixing by mix in place method with rotavator al OMC, and compacting with vibratoy roller to achieve the desired density complete as per clause 401. for grading I material (GSB-1) (Sanction rate) 1001

Providing, laying and spreading of graded stone aggregate (WMM) after mixing with water at OMC in mechanical mix plant carriage of mixed material by tipper to site, laying with 1% OPC cement and 3.50% Emulsion in uniform single layer on sule base/subgrade and compacting with the road roller to achieve the desire density 4160.00 Providing Laying 4160.00

Providing and applying primer coat with bitumen emulsion (slowe setting) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means. (Sanction Rate) S/R

Providing and applying tack coat with binamen VG-10 using bitamen pressure distributor at the rate of 0.20 kg per sqm on the prepared hituminous surface cleaned with mechanical broom Tack Coat

Providitig and laying bituminous macadam (B.M.) with 100-120 TPH hot mis plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading premixed with bituminous binder 3.30%, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Sanction Rate) 1052

25 mm thick Semi-Dense Bituminous Concrete (S.D.B.C.) (Using Water Plastic) providing and laying Semi-Dense Bituminous Concrete with 100-120 TPH batch type HMP producing an average output of 75 sonnes per hour uning crushed aggregates of specified grading, premised with bituminous binder 5 per cent mix to work at site as per MORTH & 11 specification clause No. 508 complete in all respects(Reducing Bituminous Quantity by 8% and replacing it by Plastic wastage as per IRC: SP: 98-2013) (Sanction Rate) 1054

Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge, Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. In cement mortar DSR 15.7.4

Deduction of saleable Brick bat all complete (Supply Rate+ 10% in 2020-2021)