17/BBES of 2025-2026

Supply & Fixing 240 V 50W 4ft LED light (Make- Philips)

Supply & Fixing 240V, B-22, 14W LED Bulb (Make- Philips)

Supply & Fixing of 12 W Emergency Inverter LED Bulb (Make- Philips)

Supply & Fixing 240V 5W 1ft LED Light. (Make- Philips)

Supply & Fixing 240V 25W LED Streeet light. (Make- Havells, Model No.- ENDURASUNDOWNSL25WLED765PASYBOC/ Philips/crompton/ Sililar Spec.)

Supply & Fixing 240V 30W LED Flood light.(Make- Havells, Model No.- JETALEGANZAFLS30WLED757P60DTOTG/ Philips/crompton/ Sililar Spec.)

Supply & Fixing 240V 35W Post TOP (Make- Wipro, Model No.- LP07-431-XXX-57-CL / Philips/crompton/ Sililar Spec.)

Supply and fixing of 240V Bolard light (Make- Wipro, Model No. LB14-131-X65-08G1 / Philips/crompton/ Sililar Spec.)

Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. (Legrand Make) D-6,7 a) 6-32 A SP MCB

b) 40 A DP MCB

C) 63 A DP MCB

Supply & Fixing of EkinoxeTM distribution boards (Cat no. 6019 32, Make- Legrand), 2 (+1) Module.

Supply & Fixing of EkinoxeTM distribution boards (Cat no. 6019 94, Make- Legrand), 4 Module

Supply & Fixing 240 V 6 A Modular type switch (Brand approved by EIC) on existing GI Modular type switch board having top cover plate and making necessary connections as required. E-17,3(a)

Supply & Fixing 240 V 16 A Piano key type switch (Brand approved by EIC) on GI Modular type switch board having top cover plate and making necessary connections as required. E-17,3(b)

Supply & Fixing 240 V, 6A, 5 pin Modular type plug socket (Brand approved by EIC), without switch & plug top, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. E-17,4(a)

Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch, on existing GI Modular type switch board with top cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.E-17,4(b)

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20/25 mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. a) 2 x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC E-14/ 1 (a) (iv)

b) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC E-14/ 1 (a) (iii)

c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC E-14/ 1 (a) (ii)

d) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC. E-14/ 1 (a) (i)

Supply & delivery of Hi- wall Split Air conditioner (Inverter type) having following specification: Cooling Capacity(Kcal/Hr)- 6000 K.Cal/hr or 6900W (Minimum) ISEER Rating - 3.8-4.39 /2023-2024 as per Latest BEE/BIS IS Compliance- IS 1391 Refrigerant- R410A / R32 Compressor - Rotary/ Scroll Evaporator & Condenser Coil: Copper operating outdoor Temperature - 50°C and above PCB must be in Metallic Enclouse to avoid internal fire hazard Power supply - 240 V,50Hz (+ Tolerrance as per applicable standard) Make:- (O-General/Mitsubishi Electric/Mitsubishi Heavy /Hitachi )

Installation Testing & commissioning of the above Said Split Acs incl. Supply & fixing required Angle iron structure on wall for placing outdoor unit and mending Good the damages as per direction of EIC.

S & Installation of Extra Add-on Items- HVAC grade 5/8"(for suction) & 1/4"(for discharge) copper refrigerant pipe with 9mm thick nitrile rubber insulation including shaddle, screws, insulation tape, fasner etc for above AC machines as per direction of EIC.

Supply & Laying 1.1KV grade 3 core 4 sqmm flexible copper cable with screw, saddle drill machine nut bolt etc all necy. items needed for connection.(from starter to AC outdoor connection)(Make: Havells/KEI/Polycab/Fenolex as per approved by EIC)

Supply & Laying 20mm hard PVC pipe(heavy type) for water discharge(Make: supreme )

Supply & Fixing 25A Plug top (Make:Havells/anchor/North- West)

Please Enable Macros to View BoQ information