Construction of Anganwadi and Construction of Toilets to Anganwadis at Ward No.07, 04, 08 & 19 in TP Ainapur limits of Belagavi District under Chief Minister Amrut Nagarothana (Municipality) Phase - 4 Project

Construction of Anganwadi and Construction of Toilets to Anganwadis at Ward No.07, 04, 08 & 19 in TP Ainapur limits of Belagavi District under Chief Minister Amrut Nagarothana (Municipality) Phase - 4 Project

Earth work excavation by manual means for drains, canals, waste weir, draft, approach channels, key trenches, foundation of Buildings & bridges and such simillar works in all kinds of soils, asper dra...

Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...

Providing Random rubble masonry with hard stone in foundation and plinth including levelling up with cementconcrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate20 mm nominal size) upto...

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...

Providing and laying in position Cement Concrete for all Super structures of

building , Road works, Water works, Irrigation works & super structure works

of bridges upto 3.50 m height. Thegranite/tr...

Addendum I-Additionalities for formwork, Centering & Scaffolding " For Foundation upto Plinth (a) Isolated " at 5%( CSR 2023-24 Volume 1 (P No:111 .No:3)

Addendum I-Additionalities for formwork, Centering & Scaffolding Piers & Abutments at 10%( CSR 2023-24 Volume 1 (P No:111 .No:10)

Addendum I-Additionalities for formwork, Centering & Scaffolding Well Foundation WALL at 20 %( CSR 2023-24 Volume 1 (P No:111 .No:6)

Providing Brick work with common burnt clay modular bricks of class designation 3.5 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand) including cost of allmaterials, labour, sca...

Providing & fixing of 3-track 2-panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimumTiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer)a...

Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including costof allmate rials,machinery,labour,cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying wi...

Providing 12 mm cement plaster with cement mortar 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corners wherever required smooth rendering, roviding and removing scaffolding, inc...

Providing 18 mm cement plaster in two coats under layer 12 mm thick cement plaster with cement mortar 1:5 (1cement : 5 coarse sand) finished with a top layer 6 mm thick cement plasterwith cement morta...

Flooring with 25mm thick polished tandur blue stone slabs using cement mortar 1:6, 25mm thick over existing cement concrete bed or top of roof laid to line and level and jointed with cement slurry mix...

Providing Mathi/Nandi wood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete a...

Providing and fixing in position fully panelled Matti/Nandi wood shutters for doors with , stiles and rails of 30mm. thick with bottom and lock rails 180mm wide top rail and stiles 100mm wid as per dr...

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round barsetc. including priming coat with approved steel primer all complete. Fixedto opening...

Painting with oil type wood preservative of approved brand and manufacture :New work (two coats) to give an even shade including preparing the surface after thorougly cleaning oil, grease, dirt and fo...

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete as per sp...

Painting with Silicon & Acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces :One coat with paint of approved quality to give ...

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two coats) over and including water thinnable priming coat with cement primer after th...

Finishing walls with water proofing cement paint of required shade : Old work (one coats @ 2.20 kg/10 m*) complete. including preparing the surface after thoroughly cleaning the surface to remove all...

Providing & fixing White vitreous china water closet squatting pan (Indian

type) along with "S" or "P" trap including dismantling of old WC seat and

"S" or "P" trap at site complete with all operati...

Providing skirting, dadooing, rises of steps with white glazed tiles 6mm

thick on 10mm thick cement plaster 1:3 and jointed with white cement

slurry over existing rough plaster surface using glazed ...

Providing and fixing P.V.C. waste pipe for sink or wash basin including

P.V.C. waste fittings complete. 40 mm dia .(Comman SR-2023-24)VOL-2 SL No-14.28.2.2 Page No-136 )

Providing and fixing unplasticised PVC connection pipe with brass unions20 mm nominal bore CSR 2023-24. (Page no. 118 vol2 -Item No 13.8.1.2)

Providing and fixing Brass full way valve gate with C.I. wheel of approved quality (screwed end) :. 25 mm nominal bore CSR-2023-24 ( Page.No. 117 vol2, Item.No. 13.4.1)

Providing PVC ringtite pipes conforming to IS 4985:2000 with latest amendments and conveying to worksite, rolling and lowering into trenches, laying true to line and level and perfect linking at joint...

Providing and fixing brass bib cock of approved quality 20 mm nominal bore :csr 2023-24 v2 P.No - 117 I.No 13.2.2 )

Polyethylene water storage tank with cover and suitable locking

arrangement VO 2 (Pg A-30 ,SI No-622)

Supplying and drawing 3 core flat PVC sheathed submersible pump cable manufactured with electrolytic grade copper with flexible copperwith low resistance conductor confirming to13:8130-1984 and virgin...

Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos. of machine screws, bolts nuts etc., complete on the existing m...

Supplying and fixing 32A security and energy saving DP switch with key tag suitable to operate on 230 V, 50Hz AC supply & completely wired on existing box.(Comman SR-2023-24 Vol-6)I.NO-3.7 Page No-9

Supplying & fixing of Porcelain fuse channel with cut out on existing wooden/panel using necessary nuts, bolts and washers.(Comman SR-23-24,Vol-6)I.NO-5.7.1 Page No-14)

Supplying and fixing regular MCCB distribution Panel confirming to

IS/IEC 61439 - 3 and IK09 tested as per IS/IEC 62262 with minimumIP43 protection provided with Polyurethane (PUR) gasket, with suitab...

Point wiring using copper wire with switch.: Supplying and wiring adopting loop system in existing PVC Conduit /casing capping casing capping using 2x1.5mm2 (Phase & Neutral) & 1x1.0 mm2 (Earth wire) ...

Wiring for lighting/power circuit using one of FRLS PVC insulated 1100V grade, multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified IS...

Supplying And fixing/replacing of 6/16/32A electrical accessories on existing switch board 6 Amps SP Switch (Comman SR-23-24,Vol-6)I.NO-3.14.1 Page No-10)

b) 6 Amps 3 Way 5 Pin Socket (Comman SR-23-24,Vol-6)I.NO-3.14.3Page No-10)

c) 6 Amps Bakelite Ceiling Rose (Comman SR-23-24,Vol-6)I.NO-3.14.5 Page No-10)

d) 6 Amps Lamps Holder (Comman SR-23-24,Vol-6)I.NO-3.14.6 Page No-10)

Supplying & fixing of Surface mounting type retrofit type -LED tube ....... W comprising of LED linear source with CCT 6500 degree K, CRI 70%.efficacy 80 lumen per W, life 25000 burning hours and Comp...