Master Drainage Scheme Faridabad- Integrated design, Development and Beatification of Barahi Talab, Faridabad with recreational, cultural and public amenities and all other works contingent thereto.

Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete including Sandwitched puff panel roofing with Wall AAC Block finish with 12 mm 1:4 ratio plaster as per detail drawing by Architect (Work includes False ceiling ,Paint work, flooring and fascade work ) for kiosks

HT end termination

LT Cable Gland

LT Cable Lungs

4C x 4 sqmm copper

4C x 10 sqmm copper

Supply and fixing of 16 mtr High mast shaft with 8 Nos. 300W LED light of approved make with rising system hot dip glavanized inside and out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 and having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries and its control gear boxes 0.75 HP power tool moter, 3 point suspension system with steel wire rope 6 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc, completee in all respect

Concertina Wire Fencing 1040 mm Dia (Top of Wall) Providing and fixing 1040 mm dia concertina wire fencing on top of wall with 0.6 m high Y-type angle iron posts (40 mm x 40 mm x 6 mm) placed every 3 metres centre to centre, securely embedded in M15 grade cement concrete on top of the wall. Every 15th post, last but one end post, and corner post shall be strutted on both sides, and the end post on one side only. The concertina coil shall be supported on and secured to horizontal GI straining wires using GI clips/tie wires, fixed with GI staples, turn buckles etc., complete as per clause 807.

Supply, installation, testing and commissioning of floor-mounted, indoor type, front-operated, compartmentalized Main LT Panel suitable for 415V, 3 Phase, 4 Wire, 50Hz AC system, fabricated from CRCA sheet steel with powder-coated finish, IP54 protection, complete with Aluminium busbars, 800A 4P ACB as Grid Incomer for 500 kVA utility supply, 630A 4P MCCB as DG Incomer for 400 kVA DG set, 800A 4P ACB bus coupler, digital multifunction energy meters with CTs, indicating lamps, selector switches, surge protection device (SPD), control wiring, terminal blocks, earth and neutral busbars, and outgoing feeders comprising MCCBs for CCTV Panel, Audio/Video Panel, Street Lighting Panel, External Illumination Panel, Irrigation Panel and Cafeteria Panel, including all internal interconnections, labeling, earthing provisions, accessories, testing, commissioning and handing over complete as per IEC/IS standards and approved drawings.

Supply, installation, testing and commissioning of indoor, metal-clad, floor-mounted, 11kV VCB Panel comprising 1 No. 630A Vacuum Circuit Breaker incomer feeder and 2 Nos. outgoing feeders, suitable for 11kV, 3 Phase, 50Hz system, with fault level as specified, complete with microprocessor-based numerical protection relays, CTs, PTs (where required), busbars, earthing switch, spring charging mechanism, local/remote operation facility, mimic diagram, multifunction meters, annunciation system, interlocking arrangement, cable termination chamber, space heaters, control wiring, terminal blocks, gland plates, danger notices, and all accessories. The panel shall be factory assembled, type tested, conforming to relevant IS/IEC standards, suitable for indoor installation, including testing, commissioning and handing over complete in all respects as per approved drawings and specifications.