Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹37.3 LAccepted-AOC MEGHA SADAN GAGANNAGAR CURTI PONDA GOA 403401 | PONDA | SOUTH GOA | GOA | 403401 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹42.0 L+₹4.3 L (11.4%)Rejected-Finance | L2 | Rejected-Finance Being L2 | |
| 3 | L3₹42.9 L+₹5.2 L (13.9%)Rejected-Finance | L3 | Rejected-Finance Being L3 | |
| 4 | L4₹43.7 L+₹6.0 L (16.0%)Rejected-Finance | L4 | Rejected-Finance Being L4 | |
| 5 | L5₹44.9 L+₹7.2 L (19.2%)Rejected-Finance H NO 209 D SHRI SHIVA NAGAR IV MANCHARA SIKAR ROAD JAIPUR | JAIPUR | JAIPUR | RAJASTHAN | 302013 | L5 | Rejected-Finance Being L5 |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
11 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Hisar
HQ CWE Hisar Hisar Mil Stn Hisar
RESURFACING OF ROADS OF ZONE B HISAR MIL STN UNDER GE(W) HISAR
2022_MES_557847_1
CWE/HSR-31 OF 2022-23
Open Tender
Civil Works - Roads
Item Rate
90 days
Hisar Mil Stn
As per tender documents
9 documents required · 9 mandatory
₹500
GE (W) Hisar
₹90,000
16 Nov 2022
14 Oct 2022
14 Nov 2022
14 Oct 2022
11 Nov 2022
28 Oct 2022
Amount
Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area exc 400 sqm and exe 50mm deep but n.exc 100mm deep
M&L 150mm thick WBM (compacted thickness) laid in two layer .consolidate thickness of each layer is 7.5cm of WBM, with granite/basaltt coarse aggregates of grading 2 (63 to 40mm size) or of grading 3 (50 to 20mm size), spread,rolled and consolidated and rolled to 8 to 10 ton power roller to gradient and camber required
M&L Premix bituminous, macadam using paving bitumen VG-30 grade laid/rolled and compacted to required gradient and camber (consolidated thickness 75mm or less) ® with 8 to 12 tone power roller complete. Note :- Primixed Bituminus mecadam shall be mixed in hot plant transported to work site an laid spread leveled with mechanical paver machine complete.
Preparing surfaces of unsurfaced water bound macadam by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and finally cleaned with mechanical air compressor and M&L for applying evenly a priming /tack coat with bituminous primer using paving bitumen VG 30 top grade @ 10 kg per 10 Sqm with hot spray mechanical machine.
M&L Preparing Black top surface by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc with mechanical air compressor and Applying evenly a priming/tack coat with bituminous primer using paving bitumen VG 10 at 5 kg per 10 Sq metre with Hot bituminus spray mechine complete all as specified.
M&L for Bituminus premix asphaltic semi dence concrete 30mm consolidated thickness with 5.5% binder content paving bitumen VG 30 by weight of total mix, rolled and compacted to required camber and gradient complete laid and spread with mechanical paver mechine and rolled with 8 to 12 tone mechanical power roller complete. Note :- Premixed Asphaltic semi dence concrete shall be mixed in hot mix plant, transported to work site an laid spread leveled with mechanical paver machine complete.
M&L Renewing cement concrete tiles 25 mm thick of size 300mmX300mm in patches, area in not exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting over 20mm thick screed bed of CM(1:4), jointing and pointing new or old tiles complete
Supply and fixing as in Repair metal tubular dealineator made out of ABS round body fitted with 2 Nos 65 mm dia highly reflective reflectors made out of PMMA and mounted on 45/50 mm dia mild steel pipe of 600 mm height duly powder coated and thermo plastic elastomer 3 bands of green, red and yellow reflector radium tape of 25 mm wide strips with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 complete all as specified and directed ®
Supply and fixing as in repair cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector of model No. DA 972.0 fixed with and incl MS stud of suitable size as per manufactures instructions
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.
M &L for preparation of New surfaces of road side kurb stone of any description over 10 cm girth or width not otherwise described and applying two coats of synthetic enamel paint complete all as specified & directed.
M &L for preparation of old painted surfaces of road side kerb stone of any description over 10 cm girth or width not otherwise described and applying single coat of synthetic enamel paint complete all as specified & directed.
Manufacturing, supplying and fixing as in repair retro reflective sign boards of any shape, size and area shall be exc 0.5 sqm but not exc 1.5 sqm with support length of 3750 mm and made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge.
S&F Heavy duty PVC Modular, interlocking type Speed Breaker of size 600 mm wide, min thick at centre shall be 100mm, fixed with 150mm long heavy duty screw bolts, complete all as specified and directed
S & F in repair road safety Convex mirror of 80 Cm dia, made of one piece polycarbonate lens which is damage resistant, complete with mounting hardware as per manufacurer. Make : Oscar Model No: OS-790 or equivalent of Dark Eye
M&L for Painting lines, dashs, arrows, letters etc on roads, pavements and the like exc 10cm wide with Thermoplastic paint 2mm thick with glass beading for reflaction paint. White or golden yellow.
M/S Sulakh Brothers
J.J.ENGINEERING
DABAA CONTRACTORS
Satish kumar and company
M/s Devendera construction
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .