Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.2 LAccepted-AOC | L1 | Accepted-AOC Lowest bidder | |
| 2 | L2₹29.3 L+₹1.5 L (5.46%)Rejected-AOC NO 15 PULAVAR GOVINDAN STREET GANDHI NAGAR AVADI CHENNAI 600 054 | AVADI | CHENNAI | TAMIL NADU | 600054 | L2 | Rejected-AOC Not Lowest bidder |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
23 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer, St.Thomas Mount
Garrison Engineer, St.Thomas Mount, Old MH Complex, Rudra Road, Chennai-600 016
WELCOME MAINTANCE AND CERTAIN B/R PETTY REPAIR WORK TO BLG IN MH COMPLEX PALLAVARAM (B/R SERVICES) AND WELCOME MAINT TO BLDGS AT VARIOUS LOCATIONS (E/M SERVICES) UNDER GE STM
2022_MES_547791_1
8301-WELCOME MAINTANCE AND CERTAIN BR PETTY REPAI
Open Tender
Civil Works
Item Rate
270 days
GE STM
As per tender documents
6 documents required · 6 mandatory
₹500
Garrison Engineer, St.Thomas Mount
₹60,000
Yes
10 Oct 2022
26 Aug 2022
1 Oct 2022
26 Aug 2022
23 Sept 2022
9 Sept 2022
26 Aug 2022 - 2 Sept 2022
90 days
Amount
Preparing plastered or unplastered old decorated surfaces of wall by brooming down or steel wire brushing scraping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of white wash complete all as specified .
Preparing plastered or unplastered old ceiling surfaces by brooming down or steel wire brushing down smoke soot, moulds, moss and efflorescent saft and trading oil and greasy spots and applying one coat of white wash complete all as specified.
Preparing old decorated plastered or unplastered wall surfaces by brooming down or steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salt and trading oil and greasy spots and applying one coat of oil bound distemper white or tinted complete all as specified.
Complete removal of existing treatment on walls and applying two coats of Oil bound distemper over a coat of primer and over a coat of wall putty including necessary preparation of surfaces all as specified and as directed.
Preparation of old painted wooden surfaces of any description not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified.
Preparation of old painted steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified.
Taking down chowkats with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc 4 Sqm each and offered as credit.
All as per item No 07 here in before but n exc 1.5 Sqm each
Taking down shutters of any description area exc 1.00 Sqm and n exc 2 Sqm each.
Taking down shutters of any description area n.exc 1.00 Sqm each
Taking down shutters of any description or type area exc 1.00 Sqm and n.exc 2 sqm and refixing in same opening after necessary repairs/re size
Taking down shutters of any description or type area n.exc 1.00 Sqm and refixing in same opening after necessary repairs/re-size
M&L for cutting holes in brick walls in cement mortar exc half brick but n.exc one brick for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required Note:- Depth of embedded portion of holdfasts or lugs measured from the face of the jamb into the wall
M&L for second class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
M&L for second class hard wood 35mm flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides
M&L for second class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers.
M&L for anodised aluminium door seals of 32mm (overall size) with standard 1mm thick aluminium sections and bottom brush and provision of counter sunk holes for screws etc all as directed
M&L for second class hard wood 30mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers. In windows and ventilators are provided with stiles and rails as specified in SSR Part I, Section 8 clause 8.24(b)
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows / wooden windows
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows
M&L for FI 25x3mm for hold fasts stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay),conforming to Fe 290 GDE E-165
Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating ends of posts, backs of Chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each
Preparing surface of wood & wood based materials, steel & iron work, new or old, of any description & grith, not otherwise described & treated with tar or coal tar black paint treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of Chowkats, etc., area n exc 0.1 sq.m each
M&L for solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. square tube, suppling & fixing in opening as per specification & all as directed.
S&F factory made solid pvc moulded door shutters with wood free EPS, 28 to 30mm thick (stiles), with 2,4, or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm Plain Colour PVC sheet on back face, supplying & fixing in frame at site as per specification & all as directed.
S&F SS Butt hinges,100mm medium weight, cold rolled ss steel, and fixed
S&F SS Butt hinges, 75mm medium weight, cold rolled ss steel, and fixed
S&F 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21
S&F extruded aluminium alloy handles,150mm fabricated type anodized
S&F extruded aluminium alloy handles,100mm fabricated type anodized
S&F Aluminium, 150mm anodized, barrel tower bolts extruded section & fixed
S&F Aluminium, 100mm anodized, barrel tower bolts extruded section & fixed
S&F Aluminium alloy, anodized, 300mm sliding door bolt with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded section & fixing blots & sliding bolts of extruded section or cast aluminium alloy & fixed
S&F mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete.
S&F 150mm double legged door stopper of aluminium alloy body & tongue, anodized, with hard drawn steel spring, fixed.
S&F shutter, hooks & eyes Aluminium, 150mm
S&F in repairs shutter, hooks & eyes Aluminium, 150mm
M&L for preparation of new or previously untreated wooden surfaces of any description, not otherwise described, over 10cm width or girth applying two coats synthetic enamel paint over one coat of prink primer
Hacking out broken glass any thickness, size, quality, from wooden frame/steel frames fixed with putty or with wooden beads.
S&F 4mm thick sheet glass, ordinary quality & glazing with oil putty in square n exc 0.5 sq.m in each pane
S&F in repairs Aluminium anodised tubular curtain rod 20mm dia with brackets.
S&F in repairs prelaminated particle board exterior grade, 18/19 mm thick prelaminated both sides with decorative choice lamination, fixed with screws to timber frame work as in shelves/ cupboard shutters and partitions.
M&L for 6mm thick teak wood lipping for external of 18/19 thickness of board
S&F in repairs 30mm Continuous (piano) hinges, mild steel, bright finish or electrogalvanized
S&F in repairs100mm Hasp & staple, safety type, aluminium with mild steel hinges pin including bolt to hinges plate & fixed with screw
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises
M&L for non skid ceramic tiles each tile area (sqm/rectangle) exc 0.06Sqm but not exceeding 0.11Sqm tile thickness 7 to 8 mm, in floors etc set and joined in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer with CM 1:4 for laying floor finishes all as specified .
M&L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles n exc 0.36 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in coloured cement to match including 15 mm thick screed bed or bedding layer in CM 1:4 for floor finishing complete all as specified and as directed .
All as per item No.48 above but in vertical surfaces dado/skirting including CM 1:3, 10mm thick backing coat.
M&L for glazed coloured ceramic tiles in vertical surfaces 350x250x7/450X350X7 mm thick etc, set & jointed in neat cement slurry & pointed in white or coloured cement to match incl 10mm thick backing coat CM 1:3 dado/skirting
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth
Taking down GI water tubing and connections for 15mm bore all as directed
Taking down GI water tubing and connections for 20mm bore all as directed
S&F tubing, medium grade, galvanised, 15 mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified
S&F tubing, medium grade, galvanised, 20 mm bore with all fittings; fixed to walls and ceilings or laid in floors complete all as specified
Fixing only GI water tubing of 15mm bore after proper cleaning all as specified and directed
Fixing only GI water tubing of 20mm bore after proper cleaning all as specified and directed
S&F in repairs vitreous China squatting pan ‘Orissa’ pattern, size 580 x 440 mm white, integral foot rests including connection to trap, and to flushing pipe, anti-syphonage pipe, etc. complete including making good to floor .
S&F in repair Vitreous China wash down water closet (pedestal pattern), white (excluding flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, anti syphonage pipe, seat cover etc, complete all as directed
S&F in repairs vitreous China wash basin, white, flat back, size 550x400mm incl 32mm waste fittings, brass, chromium plated for glazed ware basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed
S&F in repairs 10 liters capacity PVC low level flushing cistern complete with ISI marked body and ISI marked syphon
S&F in repairs PVC connections 15 mm size with PTMT nuts of length 450mm all as directed
S&F in repairs 15mm fancy type chromium plated angle cock with flange, screwed down, high pressure, with crutch handle, screwed both ends for iron pipe or for unions and fixed
S&F in repairs bib cock long body with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15 mm bore or for brass ferrule and fixed all as specified
S&F in repairs pillar cock, fancy type chromium plated, screwed down, high pressure, with or without lettered ‘HOT’ or ‘COLD’ with long screwed shanks and fly nuts, screwed for 15 mm bore
S&F in repairs fancy type Bib taps of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum Weight 15mm-90gms/20mm- 125gms).
S&F in repairs fancy type pillar cock of PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-110gms)
S&F in repairs CP wall mixer with for mixing hot & cold water screwed down for iron pipe & fixed with provn for connection to over head shower with bend pipe
S&F in repairs Bath room PVC cabinet mirror of size 350mm x 450mm (Make : prayag Cat part No 551 or equivalent make as listed in PS)
S& F in repairs Tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified
S&F in repairs chromium plated 125mm shower roses with or without swivel joints, any size, including fixing to steel pipe or union
S&F in repairs sinks with drainage board made of stainless steel 0.8mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm and making good to the adjacent surface all as specified
S&F kitchen plate rack made out of stainless steel 0.8mm thick complete of size not less than 900x750x200mm, duly assembled and fixed to wall with wall screws / fasteners all as specified and directed.
S&F in repairs Bib cock two way double Handle with flange, fancy type chromium plated, screwed down, screwed for iron pipe, 15mm bore for brass ferrule and fixed all as specified Make:- Prayag- Cat Part No 8312 or equivalent make as listed in PS
S&F in repairs chromium plated cascade health faucet with minimum 1200mm long pipe of fancy type all as specified. Make parryware Cat No.BEA-86 or equivalent make as listed in PS
S&F in repairs stainless steel Soap Dish Make : Jaquar AHS-1531 or equivalent make as listed in PS
S&F in repairs Plastic water closet seat, white, closed pattern with flat bottom, and cover and MS CP or aluminium hinging device.
S&F in repairs PVC gully trap with cover of size 125mm including PCC bed complete all as directed.
S&F in repairs 75mm PVC (SWR) floor trap, plain with grating incl jointing with solvent cement etc. complete.
S&F PVC (SWR) pipes single socketed 75mm bore of type 'B' in any length with rubber ring joints laid in trenches or floors/ walls all as specified.
S&F PVC (SWR) bends 75mm bore
S&F PVC (SWR) bends with access door 75mm bore
S&F 75 mm PVC (SWR) branch piece, single (single Y) equal or unequal with access door
S&F PVC SWR vent cowl 75mm bore
S&F PVC (SWR) pipes single socketed 110mm bore of type 'B' in any length with rubber ring joints laid in trenches or floors/ walls all as specified.
S&F PVC (SWR) bends 110mm bore
S&F PVC (SWR) bends with access door 110mm bore
S&F 110mm PVC (SWR) junction single (single T) equal or unequal with access door.
S&F PVC SWR vent cowl 110mm bore
Taking down cement or cement lime plaster, on brick or stone walls,/ceiling etc. including raking out joints, hacking for key, scrubbing down with water, etc., any description
M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces on internal wall surfaces CM 1:6 fair finished even and smooth without using extra cement.
M&L for rendering 10mm thick on fair faces of concrete surfaces on ceiling CM 1:3 fair finished even and smooth without using extra cement.
M&L for preparing newly plastered surfaces of ceilings and applying three coats of white wash to match with the existing surfaces.
M&L for preparing newly plastered surfaces of walls and applying two coats of Oil bound distemper on untreated plastered surfaces of walls over a coat of wall putty and primer including necessary preparation of surfaces all as specified and as directed.
S&F triple layered rotational moulded polyethylene water storage tanks 500 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank (minimum weight 20mm-45gms complete all as specified) including proper locking arrangements and dismantling of existing water old water tank and credit offer to contractor.
S&F triple layered rotational moulded polyethylene water storage tanks 1000 liters capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I. Incl 3 no's 20mm Nipple suitable for HDPE water tank (minimum weight 20mm-45gms complete all as specified) including proper locking arrangements and dismantling of existing water old water tank and credit offer to contractor.
S&F in repairs 20mm Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe & fixed.(Minimum weight 20mm-210gms.
S&F in repairs 20mm bore of Gun metal globe or gate, valves with iron screwed both ends for iron pipe and fixed
Taking down carefully copper/ Aluminium point wiring (light, fan, socket or power) complete (fitting such as switches, ceiling roses, pendants, regulators, sockets, etc can be measured separately) removing the material from wall/ceiling etc, making good the disturbed surfaces and taken as credit.
M&L for point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic casing caping and accessories fixed on wall / ceiling etc with suitable clamps, screws, etc in wall including making good the disturbed surfaces, matching with the existing wall surfaces including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-
(a) One light point controlled by one switch.
(b) One fan point controlled by one switch and one regulator.
(c) One 3 pin 5 Amps switch socket on independent board.
(d) One 3 pine 5 amps switch socket on same board along with other switches.
(e) One bell point controlled by bell push switch on independent board.
M&L for point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable FRLS 1100 volts grade, multistranded with copper conductors conforming to IS specifications, with colour code drawn through and including non metallic rigid PVC conduit, PVC conduit fittings and accessories concealed on wall and fixed on ceiling etc with suitable clamps, screws, etc or concealed in wall including cutting chases, pinning in, making good to facing where required and pointing in cement mortar 1:3 for concealed conduit wiring and making good the disturbed surfaces, matching with the existing wall surfaces, cutting not exceeding 10 Cm girth ,including Provn of 1.5 sqmm PVC insulated FRLS unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-
(a) One light point controlled by one switch
(b) One fan point controlled by one switch and one regulator
(c) One 3 pin 5 Amps switch socket on independent board
(d) One 3 pine 5 amps switch socket on same board along with other switches.
(e) One bell point controlled by bell push switch on independent board.
All as per item No 101 herein before but with 4.0 Sqmm single core PVC cable for one 3 pin 15 amps switch socket outlet on independent board.
M&L for sub main wiring with PVC insulated, FRLS 1100 volts grade single core multistranded copper conductor cable conforming to IS specifications, 2 runs of 6 sqmm including one run of 6 sqmm single core multistranded copper conductor PVC insulated cables as earth continuity conductor with colour code drawn through and including one run of 25 mm dia rigid PVC conduit and conduit accessories or casing capping incl accessories fixed on wall/ceiling etc., or concealed in wall and connecting to common earth dolly including taking down old unsv all as specified and directed.
All as per item No.103 herein above but with 2 runs of 2.5 Sqmm and one run of 2.5 sqmm earth wire in PVC conduit as specified and as directed.
All as per item No.103 herein above but with 2 runs of 4 Sqmm and one run of 4 sqmm earth wire in PVC conduit as specified and as directed.
All as per item No.103 herein above but with 2 runs of 10 Sqmm and one run of 10 sqmm earth wire in PVC conduit as specified and as directed.
All as per item No.103 herein above but with 4runs of 10 sqmm and one run of 10 sq.mm earth wire in PVC conduit as specified and as directed. Note for item Nos 103 to 107 :- (a) The wiring shall be done in proper colour coding using red, yellow and blue for phase, black for neutral and green for earth leads. (b) For concealed wiring the quoted rate shall be inclusive wherever required cutting chases etc.
Taking down carefully by unscrewing from boards/outlet boxes, wall ceiling fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, with plug, switch fuse and regulators etc., taken as credit and making good the disturbed surfaces of wall etc all as directed.
S&F ceiling rose, 3 phase/PVC/polycarbonate, isolated body.
Supply and Fix Switch piano flush type 5 amps single pole, one way, 240 Volts all as directed.
Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 amp, flush type all as directed.
Supply and Fix Socket outlet 3 pin 5 Amps flush type all as directed.
Supply and Fix Bell push flush type 5 amps single pole 240 Volts all as directed.
Supply and Fix Buzzer, AC, 230 volts, single pole all as directed.
Supply and Fix Bell ding dong, AC, 230 volts, single pole all as directed.
Supply and Fix Socket outlet 3 pin 15 amps flush type all as directed.
Supply and Fix Switch socket combination 2 in 1, 3 pin, 5 and 15 Amp multipurpose controlled by one switch all as directed.
Supply and Fix switch socket outlet Modular type multipurpose 3 pin,15/16A and one pin, 5A controlled by one switch all as directed.
S&F stepped type electronic fan regulator flush type all as directed.
S&F Lamp holder PVC/polycarbonate with back plate for pendant/batten fittings all as directed.
S&F modular Fan step regulator, 120W - 1 module for ceiling Fan of 1200mm sweep all as specified and as directed.
Supply and Fix modular switch 1 way 6A, 1 module
Supply and Fix modular switch 1 way 16A, 1 module
Supply and Fix modular Bell push 6A 1 module
Supply & Fix Bell Multimusical type all as specified and as directed.
S&F Modular white cover with plate with frame 2 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 3 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 4 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 6 module incl matching with white cement wk if necessary
S&F Modular white cover with plate with frame 8 module incl matching with white cement wk if necessary
S&F Modular flush box 1/2 module
S&F Modular flush box 3 module
S&F Modular flush box 4 module
S&F Modular flush box 6 module
Supply and fix in replacement of metal clad socket single pole and neutral enclosure with a two pin and earth plug top and socket complete with one single pole MCB 230 Volts 20 Amps all as specified and as directed.
Taking down carefully existing un-serviceable main switch, DB's including boards etc, from its original position complete all as directed.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 4 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways SPN Double door, fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed.
Supply and fix MCB DP, 240 Volts, 63 Amps, 10 kA rupturing capacity 'B' series complete all as specified and directed including taking down old one.
Supply and fix MCB SP, 240 Volt,10-40 Amps, 10 kA rupturing capacity 'B' series complete all as specified and directed including taking down old one.
S&F RCBO single pole & neutral, 240 volts, 40 amps, 30mA, 10kA all as directed.
Supply and fix in repair of retrofit lamp 11 watt E-27/B22 type suitable for 230 Volts 50 Hz AC supply complete including taking out old/unserviceable complete as directed
Supply and fix Wall mounted LED Batten with tube extruded Aluminium heat shrink provided for efficient heat dissipation & integrated electronic driver of Lamp type: 20W LED life time of 30000* hours including lamp all as specified and as directed. Make:Havells cat part No. LUMILINEPLUSBS20WLED865SPCSS/ CROMPTON cat part No.TRIMLINE LDL-20-WW/ HALONIX cat part No- LED AL BATTEN HLB-03-20-CW-AL-HL1.
S&F LED fittings 1X22W,220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete Make: Havells CAT No.ENDURA LINEAR NEOBS 22W LED 865 SPCWH/PHILIPS CAT NO.B1021LED25S6500PSUGRST / CROMPTON CAT NO.LDRR24-CDL/BAJAJ CAT NO.BCLAB SP22L LEDCWPCSD
Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. Make:- Havells cat No.ENDURA LINEAR NEO BS10WLED 865SPC WH / BAJAJ Cat No. BCLAB SP 10WH/ CRMPTON Cat No. LDLL 10- CDL.
Dismantling existing UNSV hylam sheet of any size from boards removing switches etc. Supply and fix hylam sheet 3mm thick including necessary cutting of suitable opening for switches, sockets, regulators, etc refixing of switches, sockets, regulators, etc replacing screws and connecting up and testing.
Supply and fixing round shape 10/12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete three core flexible copper conductor cable of suitable size complete. Make:- Havells cat No. INTEGRA NEO SURFACED LS10WLED 840S/ CROMPTON cat No. LCDSPLN-R-12-CDL/ BAJAJ Cat No. BGSLO SLEEK SURFACE 12WWH RD.
S&F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. Make:- Havells cat No.HEXAFT10WLED 857SSYMBOPC/ PHILIPS Cat No. WT202W LED10S CW PSU S3 PC /BAJAJ Cat No. BIBWP 10W LED.
Supply & Fixing of LED driver for LED fittings upto 40Watts of Any size/type .
D Subramani and Sons
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .