Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹15.0 LAccepted-AOC | L1 | Accepted-AOC Being First Lowest | |
| 2 | L2₹18.6 L+₹2.7 L (17.2%)Rejected-Finance 12 MARUTI NAGAR SIKKA HANUMAN MANDIR SIKKA SIKKA JAMNAGAR GUJARAT 361140 | JAMNAGAR | GUJARAT | 361140 | L2 | Rejected-Finance Other Than First Lowest | |
| 3 | L3₹20.2 L+₹4.3 L (27.1%)Rejected-Finance GALI MODI THEKEDAR AMLOH ROAD KHANNA DISTT LUDHIANA | KHANNA | LUDHIANA | PUNJAB | L3 | Rejected-Finance Other Than First Lowest | |
| 4 | L4₹20.2 L+₹4.4 L (27.4%)Rejected-Finance | L4 | Rejected-Finance Other Than First Lowest | |
| 5 | L5₹20.5 L+₹4.6 L (29.2%)Rejected-Finance BHAGAT SINGH CHOWK SURATGARH 335804 DISTT SRIGANGANAGAR RAJ | GANGANAGAR | RAJASTHAN | 335804 | L5 | Rejected-Finance Other Than First Lowest |
Tender Value
₹30 L
EMD Value
₹60,000
Closing Date
29 Jun 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Lalgarh Jattan
GE Lalgarh Jattan
WELCOME MAINT OF OFFRS MD ACCN AT LGJ MIL STN
2022_MES_527328_1
8933-14/22-23
Open Tender
Civil Works
Item Rate
180 days
GE Lalgarh Jattan
Class D Cat a (i)
8 documents required · 8 mandatory
₹500
GE Lalgarh Jattan
₹60,000
24 Aug 2022
30 May 2022
1 Jul 2022
30 May 2022
29 Jun 2022
15 Jun 2022
60 days
Amount
M&L for preparation of old plastered surfaces and applying one coat of oil bound distemper (any colour/tint) on wall surfaces complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered surfaces and applying one coat of white wash on wall (any colour/tint) surfaces complete all as specified and directed by Engr-in-charge.
M&L for preparation of old plastered ceiling surfaces and applying one coat of white wash (any colour/tint) on ceiling surfaces complete all as specified and directed by Engr-in-charge.
M & L for complete removal of existing finishes and treating with two coats of oil bound distemper (any colour/tint) over a coat of alkali resistant primer over 2 mm thick wall care putty including rubbing with emmery paper to make wall surface smooth and even ccomplete all as specified and directed by Engr-in-charge.
M&L for preparation of existing old ceiling surfaces and applying one coat of oil bound distemper (any colour/tint) on ceiling surfaces complete all as specified and directed by Engr-in-charge.
M&L for preparation of old wooden surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint (any colour/tint) complete all as specified and directed by Engr-in-charge.
M&L for preparation of old steel surfaces of any description exc 10cm width or girth and applying one coat of synthetic enamel paint (any colour/tint) complete all as specified and directed by Engr-in-charge.
S&F 3.0mm sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5sqm in each pane incl hacking out old brocken glass of any description complete all as specified and directed by Engr-in-charge.
S & F 3 mm thick pin headed/figured/frosted glass ordinary quality and glazing with oil putty/wooden beading in square n.exc. 0.5 sqm in each pane incl hacking out old brocken glass of any description complete all as specified and directed by Engr-in-charge.
S& F in repairs stainless steel wire cloth 0.36 nominal dia of wire and average width of aparture 1.40mm and fixed with tinted tacks or stainless steel wire staples fixed to wooden/steel shutters complete all as specified and directed by Engr-in-charge.
S & F in repairs18/19mm pre-laminated particle board exterior grade , prelaminated both side with decorative choice lamination & other side balancing white lamination fixed with screws including 6mm thck teak wood lipping fixed with head less nails/screws as in cupboard shutter and including two coat of synthetic enamel paint over a coat of primer on beading surfaces complete all as specified and directed by Engr-in-charge.
S & F continuous (Piano) hinges mild steel bright finsh or electro galvanised, width of flap when open 30mm complete all as specified and directed by Engr-in-charge.
S&F in repairs brass chromium plated cup board knobs 40 mm size with all fixing screws etc complete all as specified and directed by Engr-in-charge.
S&F in repair stainless steel curtain rod 25mm dia fixed to bracket/hook complete all as specified and directed by Engr-in-charge.
S&F in repair grownix curtain brackets finials for curtain rod 25mm dia complete all as specified and directed by Engneer -in-Charge
S & F in repairs magnatic catcher fixed with nut, bolt and washer etc complete all as specified and directed by Engneer -in-Charge
S&F in repair 15mm bore Bib taps chromium plated cast copper alloy with capastan head screwed for iron pipe or brass ferrule complete all as specified and directed by Engneer -in-Charge Note : Min weight of tap should be as per SSR Part-I
S&F in repair stop cock 15mm bore cast copper alloy cromium plated fancy type, screwed down, high pressure with capastan head, screwed both ends for iron pipe or for union complete all as specified and directed by Engneer -in-Charge Note : Min weight of tap should be as per SSR Part-I
S&F in repair 15mm bore Pillar taps chromium plated cast copper alloy with capstan heads, screwed down, high pressure with or without catered 'Hot' or 'Cold' with long screwed sheuks and flynuts, screwed for iron pipe complete all as specified and directed by Engneer -in-Charge Note : Min weight of tap should be as per SSR Part-I
S&F in repair 125 mm dia chromium plated shower rose with or without swivel joints for fixing to15mm bore pipe etc complete incl taking down old one complete all as specified and directed by Engneer -in-Charge
S&F in repair 3-in-1 wall mixer for hot and cold water supply with telephonic shower arrangement, cast copper alloy chromium plated fancy type, screwed down for iron pipe including necessary fittings & fixtures etc. complete all as specified and directed by Engneer -in-Charge
S&F in repair stainless steel kitchen plate rack, made out of 1.00mm thick sheet for size 900x1200x200mm fixed on wall with screw, washers complete all as specified and directed by Engneer -in-Charge
S&F in repair central hole basin mixer for hot and cold water supply, cast copper alloy, chromium plated screwed down for iron pipes, including necessary fittings & fixtures etc complete all as specified and directed by Engneer -in-Charge
S&F in repair health faucet with CP flexible cord fixed on wall complete all as specified and directed by Engneer -in-Charge
S&F in repair two way bib cock 15mm bore with flange cast copper alloy chromium plated fancy type screwed for iron pipe brass ferrule etc complete all as specified and directed by Engneer -in-Charge
S&F in repair PVC waste pipe 32 mm dia for WHB/kintchen sink complete all as specified and directed by Engneer -in-Charge
S&F in repair Plastic seat cover soft closer white for EWC with flat bottom incl hinging device complete all as specified and directed by Engneer -in-Charge
S&F in repair CP towel ring of size 150 mm decorative type fixed with walls complete all as specified and directed by Engneer -in-Charge
S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern, & flush pipe complete all as specified and directed by Engneer -in-Charge
S & F in repair PVC valveless syphonic action type flushing cistern (Low or high level) of 10 litre capacity, white/coloured with inlet ball valve, float, handle including fixing brackets and 32 mm bore PVC flush pipe complete all as specified and directed by Engneer -in-Charge
S & F in repair cabinet mirror of size 400mm X 500 mm fixed with PVC rawl plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engineer-in-Charge
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises complete all as specified and directed by Engneer -in-Charge
M&L for Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm, in floor etc. over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L for Vitrified Ceramic tiles 8 to10 mm thick (square/ rectangular) light shade polished, area of each tiles not exceeding 0.36 sqm,on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L for joint free non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectengular) area of each tile exc 0.18 Sqm but not exc 0.38 Sqm in floor over and including 15 mm thick screed bedding in cement mortar 1:6, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L for glazed ceramic coloured tiles of size 450 x 300 x 7 mm thick on vertical surfaces such as skirting / dados over and including 10 mm thick backing coat in cement mortar 1:4, set and jointed in neat cement slurry and pointed in coloured cement to match the floor complete all as specified and directed by Engneer -in-Charge
M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engneer -in-Charge
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed by Engneer -in-Charge
Taking down 15 mm dia steel GI tubing including all connected fittings of any dia and in any position including cleaning for re fixing the serviceable pipe complete all as specified and directed by Engneer -in-Charge
All as per serial item No 39 above but 20mm dia pipe complete all as specified and directed by Engneer -in-Charge .
S&F 15 mm dia galvanised steel tubing medium grade including necessary fittings like sockets, tees, elbows, reducers, unions etc fixed to walls / ceiling complete all as specified and directed by Engneer -in-Charge
All as per item No 41 above but 15mm dia pipe fixing only complete all as specified and directed by Engneer -in-Charge .
Taking down existing shutter of any description exc 1.0 Sqm but not exc 2.0 Sqm each and refixing in same opening complete all as specified and directed by Engneer -in-Charge . (Note:- 'Refixing' includes taking down, easing and adjusting and also refixing builders hardware as required including renewal of unserviceable screws, etc.)
Taking down cement plaster on brick / stone walls including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed by Engneer -in-Charge .
M&L for rendering, 15 mm thick on brick work or concrete surfaces in cement mortar 1:6 on wall finished even and smooth without using extra cement complete all as specified and directed by Engneer -in-Charge .
M&L for two coats of oil bound distemper on newly plastered surfaces of walls paint over 3mm thick wall care putty including preparation of surfaces complete all as specified and directed by Engneer -in-Charge .
Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sq. m but n.exc 4.0 sq. m each complete all as specified and directed by Engneer -in-Charge .
S & F for Pressed steel frames size of frame 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed by Engneer -in-Charge .
S & F for Pressed steel frames size of frame 125 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed
S&F 35 mm thick 2nd class hard wood factory made plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engneer -in-Charge .
S&F 35 mm thick 2nd class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc. sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a) all as directed.
S&F 200 mm long aluminium anodised barrel tower bolt, of extruded sections complete all as specified and directed by Engneer -in-Charge .
S&F 150 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and directed by Engneer -in-Charge .
S&F 100 mm long butt hinge, medium weight, cold rolled mild steel complete all as specified and directed by Engneer -in-Charge .
S&F for 300mm long aluminium alloy, anodised, sliding door bolt type not less than 16mm dia fixed complete all as specified and directed by Engneer -in-Charge .
S&F stainless steel wire cloth 0.63 nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed by Engneer -in-Charge .
M&L preparation of new or previously untreated wooden surface of any description not otherwise described over 10 cm width or girth and apply two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engneer -in-Charge .
S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 485mm x 420mm bowl size 410mm x 3330mm x 160mm complete all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair chromium plated fancy type soap dish complete all as specified and directed by Engineer-in-Charge.
Cutting chases, pinning in. making good to facings where required and ointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth all as specified and directed by Engineer-in-Charge.
Supply and fixing in repair glass corner shelf with CP brackets and CP railingcomplete all as specified and directed by Engineer-in-Charge.
Note:- The contract sum shall be calculated by deducting the amount shown in Credit Schedule attached to this tender, from total amount of Schedule 'A'/BOQ
SHIVA CONSTRUCTION COMPANY
AJAY CONSTRUCTION COMPANY
M/s Karan Builders
M/S Shree Ram Enterprises
Gyan Chand Marothia Engineer Contractor And Suppliers
M/S KARNI CONSTRUCTION COMPANY
GOYAL ENTERPRISES
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .