CONSTRUCTION OF FIRST FLOOR TO THE EXISTING COMMUNITY HALL AT RADHAKRISHNA NAGAR IN YANAM

Amount

15.2.1 Demolishing cement concrete manually / by mechanical means including disposal ofmaterial within 50 metres lead - 1:3:6 orricher mix.

5.2.2 Reinforced cement concrete work in walls (any thickness), including attachedpilasters , buttresses, plinth and stringcourses , fillets, columns , pillars,piers, abutments, posts and struts etc.uptofloor five level excluding cost ofcentering, shuttering,finishing andreinforcement:1:1.5:3 (1 cement : 1.5coarsesand : 3 graded stone aggregate 20mmnominal size)

5.3.1 Reinforced cement concrete work in beams , suspended floors, roofs having slope upto15 degree landings, balconies, shelves,chajjas, lintels, bands, plain windowsills, staircases and spiral stair casesupto floor five level excluding the cost ofcentering, shuttering,finishing andreinforcement with 1:1.5:3 (1 cement :1.5coarse sand : 3 graded stone aggregate 20mmnominal size).

5.9.6 Centring and shuttering including strutting, propping etc. and removal ofform for:columns,pillars,piers,abutments,posts andstruts.- Using steel sheet with M.S.frames

5.9.5 Centring and shuttering including strutting, propping etc. and removal ofform for: lintels, beams, plinth beams,girders, bressumers and cantilevers.- Usingsteel sheet with M.S.frames

5.9.3 Centring and shuttering including strutting, propping etc. and removal ofform for : suspended floors, roofs,landings , balconies and access platform -Using steel sheet with M.S.frames

5.22.6 Reinforcement for R.C.C work including straightening , cutting ,bending , placingin position and binding all complete -Thermo - Mechanically treated bars (TISCON/ VIZAG / IISCO /SAIL / JSW) includingplacing the M30 grade Athees make coverblock @ 60cm centre to centre

6.4.1 Brick work with FPS bricks of class designation 35 in superstructure aboveplinth level upto floor V level in allshapes and sizes in cement mortar 1:4 (1cement: 4 coarse sand)

5.18.1 Providing precast cement concrete jali 1:2:4 (1cement :2 coarse sand : 4 gradedstone aggregate 6mm nominal size)reinforced with 1.6 mm dia mild steel wireincluding centring and shuttering ,roughening cleaning , fixing and finishingin cement mortar 1:3 (1 cement : 3 finesand) etc. complete excluding plastering ofthe jams , sills and soffits.- 50 mm thick

9.1.2Q Providing wood work in frames of doors, windows,clerestory windows and otherframes, wrought framed and fixed inposition - Vegesa / Bandaru wood

9.5.1.1Q Providing and fixing panelled or panelled and glazed shutters for doors , windows andclerestory windows including ISI markedblack enamelled M.S butt hinges withnecessary screws excluding panelling whichwill be paid for separately. - Vegesa \Bandaru wood- 35mm thick shutters.

9.7.1Q Providing and fixing panelling or panelling and glazing in panelled or panelled andglazed shutters for doors, windows andclerestory windows (area of opening forpanel inserts excluding portion insidegrooves or rebates to be measured).Panelling for panelled or panelled andglazed hutters 25mm to 40mm thick: Vegesa\ Bandaru wood

9.53 Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mmdiameter bolts, nuts and wooden plugs andembedding in cement concrete block30x10x15cm 1:3:6 mix (1 cement : 3 coarsesand : 6 graded stone aggregate 20mmnominal size)

9.71.1 Providing and fixing IS : 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete : - 125x64x2.50mm

9.71.2 Providing and fixing IS:12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc.complete : - 100x60x2.50mm

9.96.1 Providing and fixing aluminium sliding door bolts ISI marked anodised (anodic coatingnot less than grade AC 10 as per IS:1868)transparent or dyed to required colour orshade with nuts and screws etc.complete:-300x16mm

9.97.1 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating notless than grade AC 10 as per IS:1868)transparent or dyed to required colour or shade with necessary screws etc.complete :- 300x10mm

9.97.2 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating notless than grade AC 10 as per IS:1868)transparent or dyed to required colour orshade with necessary screws etc.complete :-250x10mm

9.97.4 Providing and fixing aluminium tower bolts ISI marked anodised (anodic coating notless than grade AC 10 as per IS:1868)transparent or dyed to required colour orshade with necessary screws etc.complete :- 150x10mm

9.68.2 Providing and fixing oxidised M.S.casement stays (straight peg type) with necessary screws etc.complete. - 250mm weighing not less than 150 gms

10.2 Structural steel work riveted,bolted or welded in built up sections, trusses andframed work, including cutting,hoisting,fixing in position and applying apriming coat of approved steel primer allcomplete.

10.25.2 Steel work welded in built up section/framed work including cuttinghoisting,fixing in position and applying apriming coat of approved steel primer usingstructural steel etc. as required. Ingrating, frames, guard bar, ladder, railings, brackets, gates and similar works.

9.100.1 Providing and fixing aluminium handles ISI marked anodised (anodic coating not lessthan grade AC 10 as per IS:1868)transparent or dyed to required colour orshade with necessary screws etc.complete:-125mm

9.100.3 Providing and fixing aluminium handles ISI marked anodised (anodic coating not lessthan grade AC 10 as per IS:1868)transparent or dyed to required colour orshade with necessary screws etc.complete:-75mm

11.40.2 Providing and laying rectified ceramic rustic / matt finish floor tiles 600x600 mm or more (thickness to be specified by the manufacturer ) of 1st quality conforming to IS:15622 of approved make ( Somany / Nitco) in all colours shades laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigments etc., complete

11.36A Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson / Asian / Somany / Nitco) in all colours, shades of size 200 x 300 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. - size 200x300mm

13.3.1 20mm cement plaster of mix 1:4 (1cement : 4 fine sand)

13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3 fine sand).

13.1.1 12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

13.2.1 15 mm cement plaster on rough side of single or half brick wall of mix – cementmortar 1:4 (1 cement : 4 fine sand)

13.46.1 Finishing walls with Acrylic Smooth exterior paint of required shade - New work (Two or more coat applied @ 1.67 ltr / 10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg /10 sqm)

13.50.1 Applying priming coat - with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood).

13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give aneven shade - Two or more coats on new work.

9.134.2 Providing and fixing of 65mm Godrej Navtal lock of 7 levers with 3 keys etc complete

Cheekatala srinivasa rao

k. nukaraju

VBRUSHI

mvs murthy