DESIGN, ENGINEERING AND CONSTRUCTION OF CIVIL WORKS OF NEWLY CONSTRUCTED 33 by 11 KV, 10MVA SUB STATION AT UPPAR SIDE OF NAGBAL, IMAMSAHIB under UT Capex 2025-26

Amount

Design and Engineering, of civil works ( construction of Control Room building with truss, Chain link fencing with protection wall, Brick walling with protection wall, Transformer & Equipment foundations, cable trunch ,approach road , surface drain and other allied works ) of proposed 33/11 kv substation including soil testing of site complete

Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil.

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge for 0rdinar rock soil

P/L of soling stone dry hand packed in layers

P/L cement conc. 1:4:8 with 40 mm nominal size of stone aggregates of spacified grade

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts upto floor five level including curing but excluding cost of centering shuttering, finishing and reinforcement.1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but excluding the cost of centring, shuttering, finishing and reinforcement with 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etc upto floor V level, including curing but excluding the cost of centring, shuttering and finishing with.1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc. for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc

Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platforms.

Centering and shuttering including strutting, propping etc. and removal of form for Lintel, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, pillars, piers, abutments, posts and struts

Dry Randome rubble masonry with hard stone in foundation and plinth (Quary Stone)

P/L cement Concrete Flooring 50mm thick (M-15) in 1:2:4 mix with 25 mm niminal size agg. Of spacified grade

B/W with common burnt clay F.P.S bricks of class designation 7.5 in cement mortar 1:6 mix ( 1 cement : 6 course sand)

B/W with F.P.S bricks of class designation 7.5 in 1:4 mix

Extra for B/W between plinth and super/str. Q.V.I No. 60% of 19&20

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fastenersshall be paid for separately): in First class kail wood

P/F MS hold fasts for doors and windows

S/L of GSB/nallah muck or boulders under floors incl. Ramming watering dressing and incl. carriage complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete

15 mm thick cement plaster 1:6 mix

Kota stone slab flooring 25 mm thick over 20mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing, polishing and curing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand)

Kota stone slab 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement:3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing, polishing and curing complete.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (Welded)

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete (Grill and gate work)

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required in stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade, two of more coats on new work incl. priming coat all carriages complete Two or more coats on new work

P/F of GI round, threaded 22 mm foundation bolts 1200mm long with washers and nuts complete and nuts bolts of different sizes

P/F of GI Barbed wire on angle posts

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required (0.63 mm thick with zinc coating not less than 275 gram/m2)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. (0.63 mm thick with zinc coating not less than 275 gram/m2)

Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I.limpet and bitumen washers complete. (0.63 mm thick with zinc coating not less than 275 gram/m2)

P/F Eaves boarding of 2nd class kail wood 250mmx32mm nominal size

P/F 20mm thick wooden plank T&G ceiling under soffits.

Providing and fixing panelled or panelled and glazed shutters 35 mm thick in first class kail wood for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick of 12 mm thick Coir Veneer Board (conforming to IS: 14842) 60% of Q.V.I no.33 ''Doors''

P/F sheet glass of ordinary Quality fixed with wooden beidings (4mm thick) 65% of Q.V.I no.33 "Windows"

Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws ( 35mm thick) of 1st class kail wood

P/F of almunium fittings complete job like handles tower bolts, hooks, Ms stays,L drops

Providing and applying POP/ Wall putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Wall Painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work Q.V.I No.38

Painting wood work with deluxe multi surface paint of required shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.9litre/10sqm of approved brand and manufacture = 1.5 times of Q.V.I No. 17

Providing and fixing 0f 18 mm thick granite of any colour or shade gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels (Area of slab over 0.5 sqm)

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. .

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m

Supplying,stacking of good earth at site including royalty (earth measured in stacks will be reduced by 20% for payment) and laying spreading in layers, watering compacting complete job with all carriages upto the site (Yard area)

SITC of submersible 3 HPmotor with starter and other accessories including making all connections complete job

Boring/ drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800(part 1), with hire and running charges of all equipment tools plants and machineries required for the job, including supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410 mild steel screwed and socketed/plain ended casing pipes of 125 mm nominal bore size having min thickness of 5 mm conforming to IS: 4270 of reputed & approved make painted with outside surface with two coats of anticorrosive paint of approved brand and manufacture alongwith P/F of 32 mm dia nominal bore GI Pipes complete with GI fittings in verticle position as per direction of Engineer-in-charge upto 90 m depth below ground level. All types of soil

Supply ,fixing, cutting, straightening, jointing ,welding and fabrication complete job of GI flat iron of 50x8mm for earthing mat of yard including painting at joints with black paint

supply ,fixing, cutting, straightening, jointing ,welding and fabrication complete job of GI Pipes of 40mm Dia 3m long for earthing mat of yard with enhanceing material of charcoal & salt at alternate layers complete job

Making of Earth chambers,alongwith PVC Pit covers in Brick Masonery/cement concrete 1:2:4 mix.

Providing / Installation of Copper bonded Chemical Earthing electrode 2mtr long 300 micron.

Providing / Installation of GI bonded Chemical Earthing electrode 2mtr long 300 micron.

Providing / Installation copper bonded Earthing electrode 3mtr long.

Providing and laying of PVC pipes of 150/100/75mm Dia alongwith the plain PV Bends and Fittings underground in piecemeals/sectionwise for control cable ducting from 33/11kv equipment to cable trench i/c earth excavation of earth.

Providing and laying of PVC pipes of 75mm Dia, pierced for wheep holes vertically underground ,each 2mtr long for water treatment i/c earth excavation of underground pit.

Supplying & Stacking with laying, spreading and compacting stone aggregate of specified sizes to WBM GI specifications in uniform thickness, hand picking, rolling with 3 wheeled road / vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening /binding material to fill up interstices of coarse aggregate, watering and compacting to the required density.

P/f of Door Latches heavy Type

Carriage of material by mechanical transport from source to site of work Stone agg. 12.5/20/40mm and above av. lead of 10 km

Carriage of material by mechanical transport from source to site of work Bricks av. lead of 25 km

Carriage of material by mechanical transport from source to site of work Sand at an av. lead of 10 km

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe, 16mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge.Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc PN-16 pipe , 20mm OD(SDR-7.4)

Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in?charge. External work including trenching, refilling etc.PN-16 pipe , 25mm OD (SDR-7.4)

Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved quality conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. stop cock (concealed) of standard design and of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931

Providing and fixing 15 mm nominal bore of standard back type C.P.brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia

P/F CP gratings 100mm dia

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 25/20 mm nominal bore

Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per I.S. 13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required 610x460mm bowl depth 200mm

P/F Water closet squating pan ( indian type) with 100 mm dia p and s trap and 10 ltr pvc cistern complete

P/F of wash- basin with C.I /MS bracket 15mm CP brass pillar tap 32 mm dia waste pipe of standard pattern

P/F of white viterous china pedestal for wash-basin

Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet (100mm dia)

P/F of Mirror with plastic moulded frame rectangular shape 453x357 mm

P/F of soap dish container

P/F PVC tubes for connections

P/F soil waste went pipe PVC100mm dia

P/F soil waste went pipe PVC75mm dia

P/F water heater/ gyser of approved quality 50 ltr capacity = 1No/e.(Venus)

P/F water heater/ gyser of approved quality 25 ltr capacity = 1No/e.(Venus)

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Construction of inspection chamber incl. of brick work e/w, plaster,flooring,Cement conc. Mainhole cover and lidInside dimensions 500x700 mm and 45 cm deep for singlepipe line with one or two inlets

Construction of inspection chamber incl. of brick work e/w, plaster,flooring,Cement conc. Mainhole cover and lidInside dimensions 455x610 mm and 45 cm deep for single

P/F of 22mm/25mm/38mm dia PVC conduits incl. cap casing of 2mm thick and its acessories like bends function box etc to be acessed well and fixed on wall rawal plug and cadles = 1000Rft

P/F of light points/fan points wiring with 2.5 mm multi-sranded copper wires PVC insulated wire of approved quality through PVC conduit but excl. cost of conduit = 50 points

P/F testing and commissioning Of heating points in 4mm multi-strand 7/36 insulated copper wire of approved quality through PVC conduit excl. cost of conduit but incl. cost of 1mm multi-strand 1/18 PVC insulated copper wire for earthing.

P/F testing/commissioning 20 Amp flush type switch of anchor roma series

P/F testing/commissioning of 20 Amp twin socket heavey duty of anchor roma series

P/F connecting leg of 10/40/63 Amp double pole MCB with its all accessories

P/F testing and commissioning of 225mm exhaust fan micron make complete with ceiling rose and silicon wire

P/F of modular Electric switch board on walls of different sizes of reputed make

P/F of MCB distribution board double door 16-way Havells make = 1No.

P/F of MCB distribution board double door 8-way .

P/F testing/commissioning of 6 to 20 Amp single pole MCB with its all necessary connections .

P/F testing and commissioning of ceiling fan complete with ceiling rose and silicon .

Supply laying commissioning of main service line by 10mm2 copper wire multi-strand single core cable with its all accessories

Supply laying commissioning of main service line by 16mm2 copper wire multi-strand single core cable with its all accessories

P/F testing and commissioning of 9 watt LED bulbs of Philips make = 15No (LED)

Making of earthen pit by way of digging 8' depth and 6’ dia pit incl. earthing electrode connecting the electrode with the main board by 8swg single strand copper cotton insulated through conduit pipe then filling the pit by alternate layers of charcoal and salt and making of main hole cover with lid complete job = 1 job

Providing of kitchenware items like utensils.induction cooker,matting,chairs and tables curtains,bedding and refirgerator 200 ltr etc

P/F of Outdoor Bulk-Head lights heavy duty of standard make including bulbs inside

M/S BATKALOO CONSTRUCTIONS (BID ID -2671812)

M/S MOHD YAQOOB DAR (BID ID -2672390)

SHAKEELAHMADSHAH (BID ID -2671839)

GHULAM MOHD RAINA (BID ID -2672249)

M/S Kuchay Constructions (BID ID -2672161)

MUSHTAQ AHMAD BHAT (BID ID -2672163)