PROVISION OF HARDSTANDING WITH OVERHEAD SHED FOR 01X HRV AV 15 NEAR BUILDING NO P 90 OF 229 FIELD WORKSHOP COMPANY OF 607 EME BN AND OTHER SANCTIONED WORK UNDER GE WEST FEROZEPUR CANTT

Amount

Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/loose soil complete all as specified and directed.

Excavating in trenchs, n exc 1.5m wide and n exc 1.5m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard/dense soil complete all as specified and directed.

Returing, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soill, complete all as directed by Engr-in-Charge.

Removing excavated material n exc. 50 mtr and deposting where directed at a level n exc. 1.5 mtr above the starting point complete all as specified and directed.

M&L for Hard core 75 mm thick, using broken bricks of guage n.exc. 63mm, deposited, spread and levelled in layeres n.exc. 15 cm thick, watered and rammed to a true surface, as in below sub base, plinth protection and ramp, complete all as directed by Engr-in- Charge.

M&L for Moorum/red bajri filling in floors or pavings, laid in layeres n.exc. 15 cm thick, spread, levelled and reammed including watering, complete all as directed by Engr-in- Charge.

M&L for Anti Termite Treatment, Treating the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and directed by Engr-in-Charge.

M&L PCC 1:4:8 (Type D2) using 40 mm graded stone aggregate as in foundation filling and mass concrete.

Material and labour for cement concrete type B1 1:2:4 (20mm graded aggregate) as in hold fast , bed plates, fillling of pressed steel chowkhats and all other similar works complete all as specified and directed.

M&L for Providing precast cement concrete type B-1, 1:2:4 (20mm graded aggregate), in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete all as specified.

Supply only Sand

Supply only liquid water proofing compound.

M&L for Brick work in cement mortar 1:6 using sub class ‘B’ old size bricks, straight or curved on plan exceeding 6 metre mean radius complete all as specified.

M & L brick work with sub class B bricks straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified.

M&L for formwork to rough finished flat surfaces of concrete foundations, footings , bases of coulmns, rafts and raft beams, sides and soffits (if any) of foundation and plinth beams ; and other similar works; vertica or to batter complete all as specified and directed.

Use and waste of formwork to to rough finished flat surfaces to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200m thick (Horizontal or sloping) complete all as specified and directed.

Formwork to edges of concrete flats, treads, breaks in floors,window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide. complete all as directed by Engg-in charge.

M&L for form work to sides and soffits fo roof beams, lintel beams etc. including supports, overhangs, etc. also splays between floors and beams, etc. complete all as directed by Engr-in-Charge.

M&L for formwork to rough finished concrete surfaces of sides of square, rectangular or polygonal pillars posts, struts, piers, coulmns and stanchions complete all as specified and directed.

Supply & fix 35 mm thick 2nd hard wood plain,framed,panelled shutters(any number of panels),with panels of timber flat on both sides(feather edged), or of veneered particle board with commercial face venners fitted to chowkhats complete all as specified and directed.

S & F Small articles of 2nd class hard wood (hollock, sheesham wood may be used without financial adjustment), such as hinge blocks, door and window stops, articles not exceeding 200 cubic centimeter each and fixed with steel screws, complete all as specified.

Taking down chowkat or frame with shutters(without taking off shutters from the frame)not exc 1.50sqm each completed all.

All as per srl item No above 22 here-in-before but exc 1.5sqm and not exc 4.00 sqm.

S&F MS barrel tower bolts stone enamelled black with bright bolt,200mm length of bolt.

Supply & fix 200 mm length aluminium anodised barrel tower bolt extruded section complete all as specified and directed.

S & F 250mm long mild steel, sliding door bolt, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including bolts and nuts complete all as specified.

Supply & fix 300mm long aluminium alloy, anodised sliding door bolt with haps, staple(bolt type) and fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

S & F 100 mm size butt hinges of medium weight cold rolled mild steel and fixed with steel screws complete all as specified.

S & F Mild steel pressed handle, oval type, 125 mm size, stove enameled black and fixed with steel screws, complete all as specified.

S & F Galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture not more than 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified

S&F framed work such as grills,gratings etc, with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors framed balausters, walk ways,railings, framework of water tanks and similar works conforming to Fe 290, Gde-E-165 complete all as specified and directed.

S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

S&F Mild steel TMT bars 8mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as directed by Engr-in-charge.

S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1998 grade St-240 complete all as specified and directed.

S&F 1.25mm thickness of laths of steel rolling shutters with out ball bearing as specified including top cover anchoring rod hasp and staple and one shop coat of primer erected in position as indicated complete gear operated type with bevel gear box and crank handle complete all as specified and directed. Note:- Ball bearing for rolling shutters will be measured separately

S&F ball bearing for rolling shutters

M&L Pressed steel frames made of 1.25mm thick MS sheet of profile 105x60mm for door and window frames with one rebate including lock strike plate, shock absorber, 20mm dia 60mm long MS conduit for housing of a drop bolt, treating of internal surfaces of chowkhats with coal tar or black paint including hinges, hold fasts/lugs etc complete all as specified.

Material and labour for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/ intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre complete , all as specified and directed.

0.63 mm thick galvanised , corrugated mild steel sheeting with two corrugation side lap , fixed with coach screws and washers, in roofs,walls etc with grade of zinc coating-275 all as specified.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based trapezoidal profile roofing sheets 0.50 mm thick of any colour/length having tensile strength of 550 MPA as in roof coverings having effective & overall width 1015 mm &1072 mm respectively, profile hieght 28.5 mm and centre to centre distance between ribs 203 mm fixed with self tapping screws as directed by manufacturer on wooden/steel members including scafoldings of any hieght complete all as specified and directed.

Supply & fix Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 MPA as in roof coverings /claddings to wall, fixed with self tapping screws including scafoldings of any hieght complete all as specified and directed.

Material and labour fancy designed 8 mm thick exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600mm x 600mm grid (frame work for ceiling shall be measured and paid separately) fixed to GI frame work in ceiling and all other similar works complete all as specified and directed.

M&L 100mm thick PCC(1:2:4) Using 40mm graded aggregate as in floor concrtete complete all as specified & directed.

M&L for PCC 150 mm thick, type D-2, 1:4:8 (40mm graded aggregate) as in sub-base, complete all as directed.

M&L 50mm thick PCC(1:2:4) type B1 (20mm graded stone aggregate as in plinth protection laid in alternative panels finished even and smooth without using extra cement.

M&L for 75 mm thick cement concrete type B-1, 1:2:4(20 mm graded aggregate) as in plinth protection and all other similar works complete all as specified and directed.

M&L coloured ceramic tiles 7 to8 mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed in CM 1:6 complete all as specified and directed.

Supply only Metallic floor hardener

M&L for rendering 10mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, surfaces finished fair and even complete all as specified.

Taking down cement plaster brick walls of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified.

S&F 3 mm thick ordinary quality sheet sheet glass glazing with oil putty and glazing clips fixed complet to wooden/Steel window not exc .5 sqm in each pane

Hacking out old broken glass from metel frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new complete all as specified and directed.

M & L Preparing new surfaces of wood and wood based surfaces of any description,not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over acoat of pink primer complete all as specified.

M&L for preparing new steel surfaces of of any description, not other wise described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.

M&L for two coat of synthetic enamel paint (ordinary tint) to the steel surfaces having shop coat primer red oxide (zinc chrome) over 10 cm in width or girth not otherwise described complete all as specified and directed.

Supply and fix ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe of size 25 mm dia.

M&L for forming 12mm thick Expansion joints upto 100mm Thk Slab / flooring filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ complete all as directed by Engr-in-Charge.

Demoltion of brick work built in cement mortar of any specification and in any position complete all as specified.

Demolition of cement concrete (un-reinforced) in ground floors and pavings not exceeding 15 cm thickness below or above ground level.

Dismentling plain or corrugated steel sheeting any gauge, thickness incl nainital or similar pattern roof-covering all as spd and directed..

M&L for Polymer modified bituminous membrane with sand witched polythene film/non woven polyster reinforcement /polymeric water proofing membrane weighing minimum 3Kg/sqm ( make : IWL/STP/ HYPERPLAST or equivalent ) laid after Applying bituminous primer @ 0.40 litre per Sqm over plastered surfaces of roof including parapet surfaces. (i.e roof slab cleaned throughly to remove all loose particle dust/dirt particle ) membrane shall be laid over entire roof surface and on verticle surface up to grooves ( or as per manufacturers recommendation) with over laps of 100mm The over lap shall be sealed by flames or as per manufacturer instruction.Hot blown bitumen grade 85/25 @1.2kg/Sqm applied over the membrane should be compatible with membrane all as recommendation manufacturers and all as specified and directed.

M&L Cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in floor topping, 100mm thick including Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green and provision of expansion joint, surfaces finished even and smooth without using extra cement complete all as specified and directed.

M&L for Wearproof topping 20mm thick (incorporating an approved metallic floor hardner @ 7.10Kg/Sqm), laid on concrete floors and pavings, and finished even and smooth complete all as specified and directed by Engr-in-Charge. Note: metallic hardner shall be measured and paid separately

S & F machine pressed precast 60mm thick interlocking paver block (M-35) cement concrete tiles (yellow & red Coloured only) of approved design & pattern as approved by GE, set over & including complete all as specified and directed.

M&L for 10 mm thick (average) plastering on concrete surfaces in cement mortar 1:4, in order to maintain proper slope and base over existing roof surfaces for laying of APP based polymeric membrane, add WPC @3% of cement weight(WPC paid separately), finished even and smooth without using extra cement complete all as specified and as directed ( Note:- Polymeric membrane will be measured and paid separately)

Material and labour for 15 mm thick cement plaster in CM (1:6) on brick work/ RCC wall and finish the surface fair and even without using extra cement complete all as specified and directed.

M&L for internal plastering 10mm thick in cm 1:6 on fair faces of brick or concrete,surfaces finished even and smooth without using extra cement.

M&L for 5mm thick rendering in cement mortar (1:3) on concrete surfaces, finished even and smooth without using extra cement as in ceiling complete all as specified.

M&L for external plastering 15mm thick in cm 1:4 on fair faces of brick or concrete, .mixed with water proofing compound, surfaces finished even and fair all as specied by Engineer-in-Charge

M&L Preparation of newly plastered surfaces of walls and applyings two coats of cement base paint over a coat of primer complete all as specified and directed.

M&L Preparation of newly plastered surfaces of walls & applying three coats coats of white wash complete all as specified.

Material and Labour for preparation of newly plastered wall surfaces and applying two coats of distemper oil emulsion over a coat of alkali resistant priming paint complete all as specified and directed.

M&L for Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L for prepration of roof surface and applying two coat of solar reflective bituminous aluminium paint @0.10 Kg/Sqm over bituminious membrane complete all as specified and directed by Engr-in-Charge.

Removing excavated material as soil exc. 50 m and n.exc 250 m, depositing where directed at a level n.exc. 1.5m above the starting point, complete all as directed.

M&L for RCC type B1, 1: 1.5 :3 (20 mm graded aggregate) as in Foundations, footings, foundation beams; plinth beams; bases for columns, etc.. complete all as directed by Engr-in-Charge.

M&L for RCC type B1, 1:1.5 :3 (20 mm graded aggregate) as in slab supported on walls, beams and columns in roofs etc. complete all as directed by Engr-in-Charge.

M&L for RCC type B1, 1: 1.5 :3 (20 mm graded aggregate) as in lintel beams, roof beams, cantilevers etc. complete all as directed by Engr-in-Charge.

M&L for RCC type B1, 1: 1.5 :3 (20 mm graded aggregate) as in column etc. complete all as directed by Engr-in-Charge.

M&L for 50mm thick (measured solid) Precast cement concrete type B-1, 1:2:4 (20mm graded aggregate) in louvres and jallies including all mouldings set in cement mortar 1 :4 but excluding frame (Note : Precast frame shall be measured separately)

S&F of 40mm thick flush door shutter of solid core construction with particle board core both faces are covered with decorative face veneer with lipping /frame to match complete all as specified and as directed.

S&F bottom plate/patty 3 mm thick 125mm height including side lock at both end for rolling shutter of any type and description, fixed in position complete all as directed by Engr-in-Charge.

S & F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07.

M&L preparing rough concrete surfaces by brushing with wire brushes and removing dust, losose materials etc, sweeping with brooms and finally fanning the cleaned surfaces with air blown compressor to remove all loose dirt etc and providing & laying 25 mm thick, Antistatic Bitumastic flooring conforming to IS 8374-1977 for specification and IS 1196-1973 for laying bitumastic flooring and having material specification as below: i) Bituman (902/15 or 75/15) grade: 13-15% ii) Carbon black of conductive grade like Graphite : 5-7% iii) Stone dust (clean) : 30 % iv) Stone grit (max. 6 mm size) : 20% v) Lime stone dust (80 to 90% Calcium 30%) laid and spread uniformly and compected with hand roller to a uniform smooth surface complete all as specified and directed.

M&L for preparing New surfaces of walls/ceilings by and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer and scaffolding where required at any hieght for external painting complete all as specifeid

S&F mild steel, box type windows with side hung shutters (wire gauge or glazed shutters) including projecting type hinges with steel handles and steel peg stay, complete with sash bars, dovetailed or welded to receive wire gauge or glass with one shop coat of zinc chromate primer complete all as specified and directed.

M&L point wiring with 1.5 Sqmm (Nominal area) FRLS PVC insulated and unsheathed single core cable 1100 Volts grade with stranded copper conductor in and including PVC concealed conduit and conduit accessories along with continuous earth wire 1.5 Sqmm PVC insulated, unsheathed stranded copper conductor cable and connected to common earth dolly, with and including 1.6mm thick cadmium plated sunk MS pressed steel terminal boxes with 3.0 mm thick hylum sheet cover fixed with brass screw complete with all accessories. (a) One light point controlled by one single pole one way 5 amps switch.

(b) One fan/Exhaust fan point controlled by one single pole one way switch.

(c) One socket outlet on the same board controlled by one single pole one way switch

(d) One 5 amps socket outlet independent controlled by one single pole 5 Amp switch.

All as per Item No 90 mentioned here-in- before but one three pin 15 Amps switch socket out let on the independent board with 2.5 Sq mm PVC insulated copper conductor and 2.5 Sqmm copper conductor for continuous earthing complete.

S & F Switch piano flush type 5 amps, single pole one way duly ISI marked.

Supply & Fixing Switch piano flush type 15 amps, single pole one way duly ISI marked.

Supply & Fixing Socket outlet 5 pin , 5/6 Amps flush type ISI marked.

Supply & Fixing Socket outlet, 2 in one 6 pin 5 and 15 Amps piano flush type ISI marked.

S & F Ceiling rose surface type, bakelite 65 x 50mm, 2 to 3 terminals duly ISI marked.

S & F Lamp holder insulated body threaded dome pattern,suitable for bracket / batten fitting including 10W LED Lamp complete all as specified and directed.

Supply only Ceiling Fan complete with electronic type fan regulator and accessories 230V, 1200mm sweep. BEE 5 star rated complete all as direted by Engineer-in-charge. Model No Assel 50- 5 Star of Crompton or equivalent to Bajaj/Crompton/Havells.

S & F LED tube light fitting 18 W decorative ultra slim linear LED lighting fixture with extruded polycarbonate,environmental friendly, energy efficient 230V, complete with all accessories internally pre wired and including connecting up with twin core twisted flexible copper conductor cable with suitable size.

Supply & Fixing LED Bldg security light 30 watts with bracket (for housing street light fittings) made of GI pipe 25 mm dia light grade long duly cutted and welded at an angle of 120 degree and fixed to wall with MS clamps - 02 Nos with bolts,nuts,and washers complete all as specified and directed.

S& F sheet metal enclouser double door factory made powder coated out of CRCA mild steel sheet 1.2 mm thick wih metallic painting white series pre-wired SPN DBs, 240 volts 200 Amps rated bus bar,Neutral link,Earth bar and Din rail, 8 way dust and vermin proof suitable for incorporation of MCBs duly concealed in wall and making good to distrubed surface and colour matching complete all as specified.

S & F MCB single pole neutral 240 volts, 40 Amps, 10 KA complete all as specified.

MCB single pole 240 volts, 40 Amps, 10 KA braking capacity complete all as specified.

Earthing complete with galvanized steel plate elecrode of size 60 cm x 60cm x 6.0 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth lead GI wire of 4mm dia (8 SWG) by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of GI earth wire is connected to main switch board and protected by light grade GI pipe of 15 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate, excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009)

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core. Make : Havells/Polycab/Gloster.

Excavation in trenches n.exc 1.5 m wide and n.exc depth in loose/soft soil and getting out for laying of cable and reection pole.

Returning filling in including spreading leveling watering and well ramming in layers n. exc 25 cm in soft/loose soil complete all as directed

Removal of excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5 m above the starting point complete all as per directed

M&L for sand filling under floors, foundation or cable protection including spreding leveling in layer not exc 25cm thick.

M & L sub class B bricks locally available of size 22x11x7.5 cm laid dry width wise acrose the line of cable in trenches for protection of UG cable

Mild steel galvanised iron pipe light grade (ISI marked) 40mm bore for passing of earth lead laid in trenches fixed to walls laid under floors, roads including all fittings i.e MS clamps nuts & bolts etc as required all as specified.

M&L Earthing complete with copper plate elecrode of size 60 cm x 60cm x 3.15 mm thick burried directly in ground vertically to a depth not less than 2.5 mtr below the ground level with top edge of earth plate at a depth not less than 1.5 mtr below ground level. Earth plate surrounded by 15mm thick packed alternative layers of charcoal dust and comman salt, earth copper strip 20×3mm by means of bolts , nuts, check nuts and washers of galvanised iron with thimbles. The other end of copper strip is connected upto test point and protected by light grade GI pipe of 25 mm bore. provision of 20mm bore light grade GI pipe for watering including GI funnel and wire mesh. Pipe shall be provided vertically upto top level of earth pit and then taken horrizontally to the earth pit. Cement concrete chamber of PCC ( 1:3:6 ) type C-2 using 40 mm graded stone aggregate.The chamber shall be constructed one metre away from edge of earth pit. 50 mm thick pre cast cover of cement conrete (1:2:4) type B-1 using 20 mm graded stone aggregate,including excavation in soft / loose soil, returning filling and removal of surplus soil to a distance of 50 mm as directed and shown in Electrical Plate No- 3 of SSR Part-1 (2009). (Note: The result of earthings test shall be recorded duly signed by the contractor and Engr in Charge. If the desired earth resistance is not obtained then earthing will be redone by the contractor at his own expense)

M&L Test point terminal block made of gun metal or phosphorus bronze size 75x75x25 mm ,directed and screwed including 3 nos, 8mm dia 25 mm long hex. head screw complete all as specified and directed.

M&L Air termination single pointed Copper rod of 12 mm dia and 300 mm long complete all as specified and directed.

S&F Copper Earth Strip 20×3 mm Copper Strip complete all as specified and directed.

S&F in repair rigid non-metallic PVC conduit of size 32mm dia medium grade ISI marked with all accessories such as bends, reducers, spacers, saddles,screws, Junction complete.

M/S Yashpaul Gulati

manoj and company

M/s Bansi Lal

Supreme Constructions

M/s Surjit Singh and bros

M/s Mukand Lal Khanna