Repair and renovation of ENT OPD at 2nd Floor of OPD Building at MAMC Agroha

Amount

Civil Work Items Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. HSR:5.7 5.7.4 In cement mortar

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. HSR:5.45

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. HSR:10.62

Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. HSR:10.63 10.63.2 Size of Tile 600x600 mm

Extra for grouting the joints of floor tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. HSR:10.70 10.70.2 Size of Tile 600x600 mm

Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete HSR:30.21

Providing and applying two coats white cement based putty of approved brand and manufacturer, over plastered surface and grinding the surface smooth with sand paper to get en even and smooth finish including cost and carriage of all material , labour charges, scaffolding, sundries etc. complete HSR:11.58

Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. HSR:11.66 11.66.2 Two coats

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface : HSR:11.67 11.67.1 Water thinnable cement primer

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : HSR:30.28 30.28.1 One or more coats on old work

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 2.0 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 2.00 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: HSR:13.3 13.3.1 Profile B 13.3.1.1 Fixing with adjustable lugs with split end tail to each jamb

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: HSR:12.37 12.37.1 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : HSR:12.157 12.157.1 For fixed portion 12.157.1.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

12.157.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 12.157.2.2 Powder coated aluminium (minimum thickness of powder coating 50 micron)

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. HSR:12.158 12.158.1 Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side

Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): HSR:12.159 12.159.2 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

Providing & fixing Aluminium handle 200mm NS

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight up to 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete HSR:12.89

Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : HSR:12.98 12.98.1 300x16 mm

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : HSR:12.99 12.99.4 150x10 mm

Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: HSR:30.54 30.54.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm)

Hacking of CC flooring including cleaning for surface etc. complete as per direction of the Engineer-in-Charge. HSR:30.18

Removing of old aluminium partion door with glass and board 12mm & refix at required size as per site requirement and including new glass/board as required as per site condition complete in all respect with the direction of Engineer in charge. NS

Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete HSR:12.48 12.48.2 20 mm dia

Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete : HSR:12.73 12.73.2 100X58X1.90 mm

Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. HSR 32.47 32.47.1 With 16 mm thick bevelled tegular mineral fibre false ceiling tile (NRC 0.55 to 0.6

Electrical Wrok Items Wiring main and sub mains in two single core for phase and neutral wire and one single core for earth wire PVC insulated Copper conductor cable 1100 Volts grade in PVC Conduit etc as required.( HSR 23.3.6) 23.3.6.1 1 run of Size 1.50 Sqmm(1/1.40mm)

23.3.6.6 2 run of Size 1.50 Sqmm(1/1.40mm)

Wiring for Light/Fan/call bell point with modular type switch/socket and GI box, Modular type face plate etc in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe. (HSR 23.4.1) 23.4.1.1 Group A

Wiring for Light/Fan/call bell point in 1.5 sqmm FRLS PVC insulated copper conductor cable in 1.6 mm thick PVC conduit pipe, without separate control switch (HSR 23.4.3) 23.4.3.1 GROUP -A

Wiring in PVC conduit system for 3-pin 5amp. Plug point by using 2 no 1.5 sqmm FRLS copper wire and 1 no 1.5 Sqmm FRLS copper wire , including providing 1 no 5/6 Amp 3/5 pin Modular type socket and 1 no 5/6 Amp Modular type switch required GI Box ,modular face plate etc complete as required (HSR 23.4.4) 23.4.4.1 Group A

Wiring in PVC conduit system for 3-pin 15amp. Plug point by using 2 no 4 sqmm FRLS copper wire and 1 no 4 Sqmm FRLS copper wire for earthling , including providing 1 no 15/16 Amp 3/6 pin Modular socket and 1 no 15/16 Amp Modular switch required GI Box , modular face plate etc complete as required (HSR 23.4.5) 23.4.5.1 Group A

Supply and erection of PVC CONDUIT ISI marked (Medium) recessed in wall/ceiling etc. including the cost of PVC bends, inspection boxes, iron hooks and cement concrete etc. complete in all respect up to the entire satisfaction of Engineer-in-Charge of work. (HSR 23.7.6) 23.7.6.2 PVC pipe of 25 mm dia.

23.7.6.3 PVC pipe of 32 mm dia.

23.7.6.4 PVC pipe of 40 mm dia.

Providing and fixing GI concealed sheet metal boxes with inner and outer face plate including concealing the box in wall and fixing in position with inner plate and face plate with all labour and material required for the job complete in all respects. HSR 23.8.10 23.8.10.1 1 & 2 Modules including combined plate for Telephone and data

23.8.10.2 3 Modules

23.8.10.4 6 Modules

23.8.10.6 12 Modules

Providing and fixing modular type accessories of approved make in existing box including fixing and making necessary connections, complete in all respect. HSR 23.8.11 23.8.11.1 5 amp 1 way switch

23.8.11.3 15 amp 1 way switch

23.8.11.4 5 amp Socket

23.8.11.5 15 amp 6 pin Socket

23.8.11.7 step type Fan Regulator 2 modules 300 watt

23.8.11.8 Telephone Socket outlet modular type

23.8.11.10 Blanking plate

23.8.11.11 RJ 45 computer data socket outlet for cat 6 or cable modular type

Supply and erection of Modular case circuit breaker single pole/4 pole on existing wall/pedestal/Panel including bounding to earth and making necessary connections required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. HSR 23.22.1 23.22.1.9 4 pole MCCB 6 amp to 100 amp , 25 KA

MCCB Enclosure made of Sheet Steel suitable for mounting MCCB of following ratings HSR 23.22.2 23.22.2.1 MCCB up to 125 A FP

Supply and erection of miniature circuit Breaker 240/415 V in the existing distribution board including making necessary connections:- (HSR 23.22.5) 23.22.5.1 6 amp. to 32 amp Single Pole

23.22.5.3 6 amp. to 32 amp. double pole

23.22.5.8 40 amp to 63 amp. MCB's FOUR POLE

Supply and erection of sheet steel enclosure 1pole/2pole/4pole on wall/on existing pedestal complete as required. HSR 23.22.3 23.22.3.2 S.P.N or DP encloser suitable for DP MCB

Supply and erection of double door sheet steel enclosure distribution board suitable for MCBS and ELCBS etc. recessed in wall including bonding to earth with all labour and material required to complete the job in all respect up to the entire satisfaction of the Engineer-in-Charge of the work. (HSR 23.22.4) 23.22.4.5 TPN DB Horizantal type double door type 4 way

23.22.4.6 TPN DB Horizantal type double door type 6 way

23.22.4.7 TPN DB Horizantal type double door type 8 way

Supply and erection of MS cable tray , duly pained as required including erection of the same on wall or ceiling with necessary fixture and other material required to complete the job in all respect up to the entire satisfaction of Engineer-in Charge of the work HSR 23.23.6 23.23.6.1 MS perforated cable tray painted with powder coating 100 X 50 X 2 mm

Supply and laying of multicore telephone cable conductor size 0.51 mm bright annealed copper conductor PVC insulated and sealed in existing pipe/channel and making necessary connection complete in all respect up to the entire satisfaction of the Engineer-in charge of the work.(HSR 23.23.8) 23.23.8.1 2 pair telephone wire

Lying and fixing of cable on surface /cable tray etc as required (HSR 24.2.5) 24.2.5.2 16 sqmm to 35 sqmm 2 to 4 core

Supply and erection of suitable compression type brass cable glands for underground Cable :-(HSR-24.2.7) 24.2.7.3 25 sqmm to50 sqmm Cable 2 to 4 Core

Supply of following size XLPE/PVC insulated LT cables (i) 4 core x 35 sqmm Aluminum conductor armoured cable MAKE- Havells/KEI/Filonex /Poly Cab (N.S)

Supply,erection, testing and commissioning of AC ceiling fan 1200 mm sweep size totally white in clour suitable for single phase 230 volt, 50 Hz AC supply complete with motor,capacitor, conopy and down rod upto lenth 4 feet complete as required. Make Orient, Havells,Bjaj, (NS)

Supply,installation, Testing & commissioning of false ceiling LED Luminaires 15 watt Make- Havells /Philips with LED driver including connections with 0.75 sqmm PVC insulated copper conductor 2 core flexible circular cable upto 3 metre complete the job in all respects up to entire satisfaction of engineer-in-charge of the work (N.S.)

S/E/I/T/C of following sizes of ventilation fan (PVC body) suitable for single phase 230 volts, 50 Hz AC supply complete with motor, capacitor, louvers / shutters , and required size 12mm thick ply sheet with 2 coat paint etc. complete as required. Make- Orient / Indoasian/ Havells N.S. (i) 250mm sweep size

PAWAN KUMAR CONTRACTOR