Virangana lakshmibai Jhansi- Upgradation and modification of telecom control office at DRM Office of JHANSI Division.

1-All items of CPWD DSR-2023

2-All items of of USSOR-2021

Item Breakup - 1-All items of CPWD DSR-2023

prepare the surface even and smooth complete. 13.37S INTERIOR FINISHING Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 13.41 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : 13.41.1 New work (two or more coats) over and Sqm 1000 185.65 185650 including water thinnable priming coat with 37 cement primer having VOC content less than 50 gram/litre 13.44S EXTERIOR FINISHING JHANSI DIVISION-ENGG/NORTH CENTRAL RLY Painting with synthetic enamel paint of 13.61 approved brand and manufacture to give an even shade : 38 13.61.1 Two or more coats on new work Sqm 20 155.9 3118 15.0 DISMANTLING AND DEMOLISHING 15.1S General Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 39 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 300 73.4 22020 15.41 Dismantling cement asbestos or other hard Sqm 300 56.35 16905 board ceiling or partition walls including 40 stacking of serviceable materials and disposal of unserviceable materials within 50 metres lead. 17.0 SANITARY INSTALLATIONS 17.1S General Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with 17.2 manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic Each 8 6515.55 52124.4 41 seat and lid Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm 17.7 C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 17.7.3 White Vitreous China Wash basin size 550x400 Each 10 2301.75 23017.5 42 mm with a pair of 15 mm C.P. brass pillar taps 17.31 Providing and fixing 600x450 mm bevelled edge Each 10 1607.95 16079.5 mirror of superior glass (of approved quality) 43 complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one 18.8 step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 44 18.8.1 15 mm nominal dia Pipes Metre 30 497.8 14934 45 18.8.2 20 mm nominal dia Pipes Metre 30 537.6 16128 18.49S C.P. BRASS FITTINGS Providing and fixing C.P. brass bib cock of 18.49 approved quality conforming to IS:8931 : 46 18.49.1 15 mm nominal bore Each 20 506.8 10136 Providing and fixing C.P. brass long nose bib 18.50 cock of approved quality conforming to IS standards and weighing not less than 810 gms. 47 18.50.1 15 mm nominal bore Each 20 820.7 16414 21.0 ALUMINIUM WORK JHANSI DIVISION-ENGG/NORTH CENTRAL RLY 21.1S General Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with 21.1 required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 21.1.1 For fixed portion 21.1.1.3 Polyester powder coated aluminium (minimum Kg 250 539.85 134962.5 48 thickness of polyester powder coating 50 micron) For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings 21.1.2 wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 21.1.2.3 Polyester powder coated aluminium (minimum Kg 200 643.45 128690 49 thickness of polyester powder coating 50 micron) Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium 21.2 doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 21.2.2 Pre-laminated particle board with decorative Sqm 15 1115.4 16731 50 lamination on both sides Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. 21.3 complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 21.3.2 With float glass panes of 5 mm thickness Sqm 40 1505.25 60210 51 (weight not less than 12.50 kg/sqm) 21.3.3 With float glass panes of 8 mm thickness Sqm 10 1685.4 16854 52 (weight not less than 20 kg/sqm) Total 6659003.80

Item Breakup - 2-All items of of USSOR-2021

Tractor with Trolley for local transportation or Hour other misc. works. Total 20069.00 JHANSI DIVISION-ENGG/NORTH CENTRAL RLY