Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹41.9 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹46.9 L+₹4.7 L (11.0%)Rejected-Finance 2 FLAT NO 2 B GEETHANJALI CLASSIK APARTMENT 9TH CROSS KAGGADASAPURA CV RAMAN NAGAR BANGALORE 560 093 | BENGALURU URBAN | KARNATAKA | 560093 | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹49.9 L+₹7.6 L (18.1%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹50.1 L+₹7.8 L (18.5%)Rejected-Finance 6TH CROSS STREET KAMARAJ NAGAR PALAYAMKOTTAI | PALAYAMKOTTAI | TIRUNELVELI | TAMIL NADU | 627002 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹50.3 L+₹8.0 L (19.0%)Rejected-Finance 101 1ST FLOOR JASOL RESIDENCY 14TH CROSS KANAKANAGAR R T NAGAR POST BANGALORE 560032 | BANGALORE | BANGALORE | KARNATAKA | 560032 | L5 | Rejected-Finance Not Lowest |
Tender Value
₹49 L
EMD Value
₹98,000
Closing Date
28 Nov 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NORTH BANGALORE
GARRISON ENGINEER NORTH BANGALORE T 64 MEANEE LINESMEG AND CENTRE BANGALORE 560042
SPL REPAIRS TO BLDG NO P 56 AT DEO AND PROVN OF CERTAIN SANCTION WORK FOR NCC OFFRS MESS AND BLDGS NO P 155 FMME UNDER AOR OF AGE B R MEG OF GE NORTH BANGALORE
2023_MES_626122_1
8435
Open Tender
Civil Works
Item Rate
180 days
BANGALORE
Class D Category a(i)
7 documents required · 7 mandatory
₹500
GARRISON ENGINEER NORTH BANGALORE
₹98,000
Yes
6 Jan 2024
1 Nov 2023
5 Dec 2023
1 Nov 2023
28 Nov 2023
21 Nov 2023
1 Nov 2023 - 21 Nov 2023
Amount
Demolition of Stone Slab and tiles of any description or thickness in floor, aprons etc, laid dry and pointed etc complete all as specified and as directed
Demolition of Reinforced Cement Concrete not exc 15 cm thickness (Below or above ground level) etc complete all as specified and as directed
Demolition of brick work / Stone Masonry / PCC Block masonry built in cement mortar of any description all as specified and directed.
Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for complete etc all as specified and as directed
Taking down chowkhats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each etc complete all as specified and as directed
Taking down chowkhats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4.0 Sqm each etc complete all as specified and as directed
Taking down cement plaster of any description hacking for key or raking out joint on old brick work/stone/concrete surface etc complete all as specified and as directed
Dismantling timber scantlings in fillet, rail, posts, rafter, purlins etc under 40 sq. cm in section, in any position as in framed work etc complete all as specified and as directed
Excavating in trenches, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for foundation etc for shafts, wells cesspits, manholes, piers holes etc not exceeding 10 Sqm on plan and not exceeding 1.5 mtr in depth and getting out in hard / dense soil etc complete all as specified and as directed
Excavating over areas, n exc 1.5 m deep and getting out in hard / dense soil etc complete all as specified and as directed
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm thick with soil etc complete all as specified and directed
Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 Km above the starting point etc complete all as specified and as directed
M&L MS Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates confirming to Fe 410 -W (Gde- E- 250) quality-A etc complete all as specified and as directed
S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in roof covering/ cladding to wall, fixed with self tapping screws etc incl dismantling of Asbestos cement (corrugated,semi corrugated, etc.) etc complete all as specified and as directed
S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPA as in ridges / valley to wall, fixed with self tapping screws incl dismantling of Ridges etc complete all as specified and as directed
S&F grid suspended false ceiling GI grid system of size 600x600mm with main runner, cross tee, and wall angle of suitable sizes as per manufacturers instruction. Ceiling suspended with 3mm dia GI wire hanger fixed with butterfly clips, hold down clips etc (Main runner, cross tee & wall angle of MS galvanized with PPPCGS) including 4mm thick HPSC self textured design pre primered non asbestos fibre cement building board fixed to false ceiling complete including taking down old ceiling including grids of any description complete all as specified complete all as specified.
M&L for plain cement concrete Type D-2 1:4:8 with using 40 mm graded stone aggregate as in foundations and mass concrete etc complete all as specified and directed
M&L block masonry of Pre-cast Cement concrete Type C1 1:3:6 (using 20 mm graded stone aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:6 etc complete all as specified and directed.
M&L for rubber Moulded Pre-cast Kerb stones of cement concrete Type B-1 1:2:4 (using 20mm graded stone aggregate) factory made, size, shape, pattern and finishes as approved, including rounding, chamfered or half round and bedded of perfectly leveled surface pointed and jointed in CM 1:4 including fixing etc complete all as specified and as directed
M&L Hard core with broken stone or boulder of gauge not exc 63mm, deposited, spread and levelled in layers not exc 15 cm thick water and rammed to a true surface etc all as specified and as directed
M&L 75 mm thick cement concrete type D- 2, 1:4:8 (using 40mm graded stone aggregate) as in sub base of flooing etc complete all as specified and as directed
M&L cement concrete type B-0 1:2:4 (using 12.5 mm graded stone aggregate) 25 mm thick as in sub base of flooring etc complete all as specified and as directed
M & L for Non - skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed
M & L Vitrified ceramic tiles 9 to 10 mm thick (Light Shade) (Square/rectangular) area of each tile not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed
All as per item No 24 above but as in skirting /dado incl backing coat 10 mm thick in CM 1:3 including dismantling floor, hearth or wall tiling etc complete all as specified and as directed
M&L Glazed ceramic coloured tiles 300X450X7mm thick as in skirting / dado, set and jointed in neat cement slurry and pointed in white or colour cement to match including backing coat 10 mm thick in CM 1:3 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed
M&L for 18 to 20mm thick Green Marble (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including grinding the edges half round and polishing including, laid over 15mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed
M&L for exterior grade, coloured glossy finish rubber pressed, cement concrete designer chequered tiles of size 30cm x 30cm x 25mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment to match the shade / colour / matrix of tiles as in floor including 15mm thick screed bed in CM 1:6 incl dismantling floor, hearth or wall tiling etc complete all as specified and as directed
M&L for machine presssd pre-cast concrete interlocking coloured paver Block of glass fibre reinforced glossy finished vibro compacted any shape and size confirming to IS-15658-2006 of 60 mm thick, M-35 grade to match with grey cement and pigment including 50 mm thick M Sand cushioning etc complete all as specified and as directed
M&L providing cement concrete type B0 1:2:4 (using 12.50mm graded stone aggregate) in copings, parapets and railing upto 60cm height, kerbs, water troughs/Chajjas and the like including weathering, slightly rounded or chamfered angles and throating as directed
M&L for 75 mm thick PCC 1:3:6, type C-1, (using 20 mm graded stone aggregate) as in plinth protection etc, finished even and smooth without using extra cement complete all as specified including joints filling with sealing compound Grade "A" complete all as specified and directed.
M&L for rendering 10 mm thick in CM (1:6) on fair faces of brick work or concrete / Stone masonry surface finsihed even and smooth (without using extra cement) etc complete all as specified and as directed
M&L for rendering 15 mm thick in CM (1:4) on other than fair faces of brick work or concrete/stone masonry surface finished even and smooth (without using extra cement) mixed with water proofing compound etc complete all as specified and as directed Notes : WPC shall be measured and paid seperately
M&L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surface finished even and smooth without using extra cement etc complete all as specified and as directed
Supply only water proofing compound (Liquid) complete all as specified and as directed.
S&F Factory made 1.25 mm thick pressed steel frame of size 125 X 60 mm for door with one ore more rebate includings necessary fixing lugs, locks strike plate etc complete all as specified and as directed
M&L for cement concrete 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast and filling of pressed steel chowkhat etc complete all as specified and as directed
M&L MS framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290-0 or Fe -E-165 etc complete all as specified and as directed
S&F factory made 35mm thick flush door shutter solid core construction with decorative choice lamination both sides of shutter, kiln seasoned and chemically pressure treated complete all as specified and as directed
S & F for solid PVC frame (Single Rebated) of size 50mm x 47mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete as sepecified and directed (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)
S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face and 2mm plain colour PVC sheet on back face etc. complete all as specified and as directed.
S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete shall as specified and as directed
S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium door shutters, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing,handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified. Note - Glass and particle board shall be measured and paid separately under respective items.
S&F Powder Coating (minimum thickness of powder coating 50 micron) aluminium window and ventilator shutters, fixed/Sliding type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified complete all as specified etc. Note - Wire Cloth & Glass shall be measured and paid separately under respective items.
S&F Aluminium Powder Coating (minimum thickness of powder coating 50 micron frame in aluminium partions having horizontal & vertical distance between two frames not exc 1.00 m & section of size as directed by Engr-in-Charge of such type arrangement for fixing glass/pre-laminated board on both/one side complete with fixed in brick masonary/conc work by necessary drilling & rawl plug arrangement in (floor/glass/etc.) incl taking down existing wall partition etc complete all as specified and as directed Note - Glass / particle board shall be measured and paid separately under respective items.
S&F Box type Steel Windows/Ventilators double side shutters (Windows side hung type , Ventilators top hung) pressed steel frames made out CRC Sheet of 80x60x1.25mm double rebated, Shutters box type made out of CRC Sheet of 40x20x1.0mm , windows & ventilator shutter fixed made of glass and gauge fixed with box type hinges, Aluminium die cast handles for glass shutters, Iron flat type handles for mesh shutters, Telescopic stays, etc complete all as specified incl 12mm square guard bars/grill welded with steel frame (100mmc/c horizontically) all as specified and directed by Engineer-in-Charge. NOTE: (i) Payment under this item will be make combined for steel frames, steel shutters and Guard bar/Grill, However unit rate quoted shall deemed to include cost of beading, fittings such as handles, hinges,Telescopic stays, locking arrangements and fixing of glass and wiremesh etc. (ii) 4 mm thick sheet glass and 0.36 mm dia stainless steel wire mesh be measured and paid separately. (iii) Weight of Grill/Guard Bars, handle,hinges and locking arrangements shall not be accounted for payment purpose . (Note : All Windows/Vent design as per CECZ TD drg No 539)
S&F 8 to 9 mm thick prelaminated particle board, exterior grade, with both side decorative choice lamination & fixed with screws in Door / Partiton work etc complete all as specified and as directed
S & F 5.5mm thick tinted sheet glass and glazing with oil putty in squares exc 0.5 sq. m in each pane etc complete all as specified and as directed
S&F in repairs aluminium door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg with aluminium die cost body etc complete all as specified and as directed
S&F 4mm thick sheet glass of ordinary quality and glazing with oil putty or wooden beading to wooden frame or steel frame in squares n exc 0.50 sqm in each pane complete all as specified and as directed
S&F 4mm thick Figured glass, pin head type and glazing with oil putty in squares in exc 0.5 sq.m in each pane etcc omplete all as specified and as directed
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staple etc complete all as secified and as directed
S&F Aluminium anodised tower bolt 200 mm long of extruded section etc complete all as specified and as directed
S&F aluminium alloy, anodised sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy etc complete all as specified and as directed
S&F 100 mm thick butt hinges, medium weight, stainless steel and fixed etc complete all as specified and as directed
S&F 150 mm long aluminium handle, cast type, anodised etc complete all as specified and as directed
S&F 150 mm long Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed
S&F in repair sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmetc complete all as specified and as directed
S&F in repairs EWC with normal closing seat cover of size 540X375X415mm with S Trap incl connection to out going pipe, & seat cover and flushing pipe complete all as specified and as directed. (Make Cat no 4018 of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repairs white vitreous china one piece wash basin of size 560X410X180mm excluding taps but including 32 mm dia chromium plated fitting, PVC waste pipe 610 mm long and PVC connection 450 mm long complete all as specified and as directed
S&F in repairs Viterous China urinals, bowl type (back or corner wall type), complete including providing and fixing plugs, beddings urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; incl 40 mm dia PVC waste pipe 610 mm long and PVC connection 450 mm long, flush pipe, grating and Union for discharge pipe etc complete all as specified and as diected
S&F in repairs PVC deo flushing cistern valveless with flushing out valve, low level of 10 Ltr capacity white with inlet ball valve, float, flushing bend & handle including brackets & connection to pipe etc incl PVC connection 450 mm long complete all as specified and as directed (Make Cat no BA-502 of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repairs bib cock with flange fancy type cast copper alloy chromium plated with crutch or butterfly handle screwed down screwed for iron pipe or brass ferrule or fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9206 of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repairs 15 mm pillar taps swan neck type, chromium plated cast copper alloy fancy type complete all as specified and as directed. (Cat No PIS-14H Neptune series of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repairs angle cock with flange fancy type chromium plated brass cast copper alloy screwed down high pressure with crutch fixed for 15 mm dia bore pipe complete all as specified and as directed (Make Cat no 9210 of Prayag or equivalent make of Cera / Hindware / Jaguar).
S&F in repairs Glass Shelf 500 X125 mm with brass bracket etc complete all as specified and as directed (Make Cat no BEA-45 of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repair full corner Glass Shelf (with brass brackets) etc complete all as specified and as directed (Make Cat no BEA-52 of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repairs soap dish holder with glass etc complete all as specified and as directed (Make Cat no BA-25G of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repairs SS Grab bar Towel rail 450 mm long incl fixing arrangement etc complete all as specified and as directed (Make Cat no GM-04 of Prayag or equivalent make of Cera / Hindware / Jaguar)
S&F in repairs stainless steel towel ring incl fixing arrangement etc complete all as specified and as directed (Make Cat no BA-41 of Prayag or equivalent make of Cera / Hindware / Jaguar)
S & F 20mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.
S & F 25mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ ceiling or laying in floors incl taking down existing GI/CPVC pipe line etc complete all as specified.
S&F in repairs rotational moulded polythene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I capacity of tank 1000 ltrs incl 25 mm dia of bore ball float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic etc complete all as specified and directed
S & F 25 mm gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and including taking down old gate valve all as specified and as directed.
S&F in repairs 75 mm dia bore PVC (SWR) multi floor trap with grating including jointing with solvent cement etc complete all as specified and as directed
S&F 110 mm PVC, SWR pipes, single socketed in any length with rubber ring joint laid in floor /walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed
S&F 75 mm PVC, SWR pipes, single socketed in any length with rubber ring joint in floor /walls etc incl dismantling of existing pipe line and fittings etc complete all as specified and directed
S&F PVC bends (any radius) of 110mm dia with access door etc complete all as specified and as directed
S&F PVC vent cowls of 110mm dia etc complete all as specified and as directed
S&F PVC bends (any radius) of 75mm dia with access door etc complete all as specified and as directed
M&L for laying of DWCPE pipes line 150 mm Inner dia bore of pipe class SN-8 incl sealing of joints, fittings etc complete with collars incl demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.
M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.
M&L for PCC 1:2:4 type B-0 with using 12.50 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.
M&L for cutting into existing manholes for connecting new drains, internal dia of pipe 150 mm, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 tye B-1 smooth finished, and re-forming benching as required etc complete all as specified and as directed
M&L for Pre-cast RCC 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 etc incl demolition of existing RCC Slab of any description and in any position etc complete all as specified and directed. Note:- Reforcement steel will be measured and paid separately.
M&L for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, or securing with clips etc complete all as specified and as directed
Complete removal exising treatment (External/Internal wall /Ceiling) by means of wire brushing, sand paper, manually or mechanically up to visible of plastered surface incl rubbing and washing etc complete all as specified and as directed
M&L for 1mm thick wall care putty on wall including preparation of surface with sand paper etc to obtain smooth surface etc complete all as specified and as directed
M&L for Preparing new plastered surface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed
M&L for Preparing Old plastered surface of walls and applying two coats distemper oil emulsion, white or tinted over a coat of primer etc complete all as specified and as directed
M&L Preparing old or previously untreated Plastered / concrete surface of wall with complete removal of grass, algi, roots of any other foreigh mtrl of any description including brooming down with steel wire brushing scrapping down smoke soot's ,moulds,moss and efflorescence,salts ,trading oil and greasy spots etc and Applying two or more coats of 100% premium acrylic emulsion paint (Apex Ultima) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company depot tinted) with silicon additives @ 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm including filling the cracks etc with crack filling material as per manufacturers instructions complete all as specified and as directed.
M&L for Preparation of new or previously un-treated steel and iron surfaces of any description, over 10 cm in width or girth , not otherwise described and painting with two coats of synthetic enamel paint over a coat of red oxide primer etc complete all as specified and as directed
M&L for preparing new concrete surface and applying two coat of synthetic enamel paint over a coat of primer etc complete all as specified and as directed
S&F in repairs stainless steel decorative curtain rod of 25 mm bore with wood finishes incl fancy finale caps cap (02 nos in each curtain rod) etc complete all as specified and as directed
S&F in repair Brass Chromium Plated designer Bracket for curtain rod of dia 25 mm dia made out of SS Flat not less than 20 mm wide 1.50 mm thick and overall length not less than 160 mm fixed with screws min 2 Nos with Rawl Plug of size not less than 50 mm long etc complete all as specified and as directed
Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-3—Earthwork) to a distance of exc 1.0 Km but not exc 1.50Km , beyond the lead included in the rates, including loading, unloading and stacking at the destination etc complete all as specified and as directed
Taking down carefully aluminium/ copper wiring/power point wiring (light, fan, socket or power) complete including fittings such as switches ceiling roses, regulators, sockets light fittings, fans etc and making good the disturbed surface of walls, ceiling etc incl painting with same colour of the back ground complete all as specified and as directed by Engineer-in-Charge.
Point wiring complete concealed with 1.5 Sqmm single core PVC insulated unsheathed cable 1100 volts grade multi stranded with FRLS copper conductor conforming to IS 694 drawn through and incl non-metalic rigid PVC conduit medium grade ISI marked incl accessories concelaed type wiring incl GI/ MS branded sunken boxes suitable for normal concealed on walls including plastic/heylam laminated sheet top cover 3 mm thick/modular frame and cover of suitable module fixed with cadmium plated iron screws for housing modular/normal type switches, switch socket outlets, fan regulators etc., incl provision of 1.5 Sqmm PVC insulated single core multi stranded copper conductor cable as earth continuity conductor and connecting to common earth dolly, all as specified and as directed.for the following:- One light point controlled by one switch
All as per item No.100 above but for One fan/Exhaust point controlled by one switch/regulator
All as per item No.100 above but for One 3 pin socket out let 5 Amps on independent board
All as per item No.100 above but for One 3 pin socket out let 5 A on same board
All as per item No.100 above but for One bell / buzzer point controlled by bell push
All as per Srl item No 100 here-in-before but for 16 Amps socket outlet by using 2.5 Sqmm PVC insulated unsheathed copper conductor multi stranded on independent board including provn of 2.5 Sqmm PVC insulated solid copper conductor continus as earth wire. Note for Item No 100 to 105 :- (i) The earth wire for the points in the same circuit can be looped from point to point (ii) Earth wire shall be taken inside the conduit (iii) Cost of terminal box is deemed to be included in the item rate quoted for point wiring
S&F in replacement of ceiling rose, surface bakelite type 65 x 50 mm, 2 to 3 terminals all as specified and as directed.
S&Fswitch piano flush type single pole one way 5 Amps.
S&F switch socket combination 2 in 1, 3 pin 6 and 16 Amps flush type universal all as specified and as directed.
S&F switch socket combination 5 pin 2 in 1, 5 A flush type all as specified and as directed.
S&F socket outlet 2 in 1, 3 pin 5 A all as specified and as directed.
S&F stepped type electronic fan regulator flush switch type all as specified and as directed.
S&F LED batten suitable for indoor applications 20 Watts, 4 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLAB 20 WH LED P or its equivalent in Havells / Philips / CG.
S&F LED batten suitable for indoor applications 10 Watts, 2 feet with extruded aluminium housing & integrated LED channel complete with all accessories including taking out old fittings all as specified and directed. Make: Bajaj, Cat No.BCLSB 10 WH or its equivalent in Havells / Philips / CG.
S&F Angle holder PVC/polycarbonate type all as specified and as directed.
S&F 2' x 2' Recess mounted LED Luminaire 36 Watts white powder coated CRCA housing with LEDs seamless front frame with flate white high transmission arcylic cover complete with all accessories all including taking out old fittings as specified and directed. Make: Bajaj, Cat No : BZRSQL 36W GZi WH or equivalent Makes & model in Havells / Philips / CG.
M&L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground vertically to a depth not less than 2.25 mtr below ground level with top edge of earth plate at a depth not less than 1.5 mtr connected to galvanized earth lead wire 4 mm dia as earth lead up to 7.5 mtr long by means of nuts, bolts, thimbles,check nuts and washers etc made of galvanized iron connected to earthing test point all as shown in electrical plate No 3 of SSR Part-I 2010 and as specified or indicated and testing on completion incl earth work and excavation in any type of soil PCC (1:3:6) type C1 chamber, pre cost slab 40mm thick in cement concrete (1:2:4) type B1 with 8 mm dia MS bars reinforced at 10 cm centre to centre both ways incl funnel with watering pipe wire mesh and lugs, incl test point complete all as specified and as directed.
S&F in replacement of MCB DB TPN 6 way suitable for MCCB TPN as I/C with double door type 415 volts with 200 Amps rated busbar for housing MCBs as specified and as directed.
S&F in replacement of MCB DB SPN 8 way double door type 240 volts with 200 Amps rated busbar as specified and as directed.
S&F MCCB 4 pole 415 volts 100 Amps 16 KA, fixed type including taking out old unserviceable MCCB complete all as specified and as directed
S&F MCB single pole 240 volts 5 to 32 Amps in repairs complete all as specified and as directed
S&F MCB SPN 240 volts 32 Amps in repairs complete all as specified and as directed
S&L sub main wiring 1100 volts grade multistranded FRLS copper conductors, two runs of single core 4 Sqmm along with one run of 4 Sqm PVC insulated single core multistranded copper conductor cable as earth continuity conductor drawn through suitable PVC conduit all as specified and as directed inculding dismantling and removing old unsv submain complete. Note : 3 runs of cable and one run of conduit will be measured as unit length.
M&L in replacement of XLPE insulated, sreened, PVC bedded, galvanised steel strip or wire armouned power cables (heavy duty) with aluminium conductor, 1100 votls grade, cross sectionl area 35 Sqmm, 4 core laid in poles.
M&L for GI tubing light grade 50mm with all accessories for cable protection fixed on poles / bldgs incl necessary MS clamps, bolts and nuts etc all as specified and as directed.
Supply and fixing LED 30 W building security light having high power LED with pressure die cast housing prismatic polycarbonate diffuser, IP 66 protection ingress protection and impact resistance of IK08. 4kV inbuilt surge protection with Top opening driver cover for easy maintenance. all as specified and as directed. Make:- Bajaj Cat No.ENXT P 30L WH SY PC SD or equivalent make in Havells / CG / Philips.
S&F Bracket made out of GI tubing medium grade 25/32 mm bore, approx length 1.5 m long including MS clamps made out of MS flat iron 25 x 6 mm, nuts, bolts, washers etc including applying two coats of aluminum paint over a coat of red oxide primer including removing the old existing GI bracket from bldg complete all as specified and directed.
S&F single pole and neutral enclosure with two pin and earth plug and socket complete with 240 Volts one single pole MCB 20 Amp fixed in repairs
S&F LED street light fittings with pressure die cast housing with toughned glass, IP-66 protection etc of 72W LED Street Light Fixtures. Make : Bajaj Model No ZELA P 86L WH PO TG SD or equivalent make of Havells/Crompton/ Phillips.
S&F Street light bracket made out of 40 mm dia light grade of 1.5 Mtr length, bend in to shape including GI baracket of suitable size and thickness, fixed with nuts and bolts of suitable size.
Sreyas Enterprises
Shanmuga Constructions
M/S POTHIRAJ AND CO
Vasavi Electricals
M/S SIRI BUILDERS
Shanthi Construction
JAIHIND ENTERPRISES
J PUSHPALATHA ENGINEER AND CONTRACTOR
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .