MANUFACTURING AND SUPPLY OF RETRO REFLECTIVE SIGN BOARDS FOR SITE OFFICES AND HO SITES AT TELEMETRY

Amount

Manufacturing and supplying retro reflective sign boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type - IV of ASTM-D 4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D- 4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours). Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge.

Informatory rectangular sign boards of (0.910m x0.609 m (3.0' x 2.0') with double M.S Tee section ISMT 50x50x6 mm of support length of 2350 mm

Informatory rectangular Direction boards of 0.457m x0.274m (1.5' x 0.9') with single M.S Tee section ISMT 50x50x6 mm of support length of 2350 mm

Informatory rectangular sign boards for Telemetry ( of 0.609m x0.304 m (2.0' x 1.0')

Making , supplying and fixing of PYLON Board made out of ACP sheet of Aludecor/Eurobond make 3mm thick routered on all sides and fixed on to M.S Square tube of 1"x1" box type frame supported with 4"x4" Square Pipe to hold from the ground level on top ACP logo as per specs with L.E.D light for illumination embossed type names with inner cut type and letters sandwich tye flat with necessary pit taken below the ground level of 1.5'x1.5' x2' with necessary masonary materials filed with bolt & nut type duly and elegantly finished and direction of Engineer-in-charge. SIZE = 7' x 3'

Transportation charges for supplying of sign bards and direction boards at locations given in Table A of NIT

Arche Constructions