Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC Lowest | |
| 2 | L2₹27.8 L+₹2.4 L (9.50%)Rejected-Finance | L2 | Rejected-Finance Being other than L1 | |
| 3 | L3₹27.9 L+₹2.5 L (9.90%)Rejected-Finance | L3 | Rejected-Finance Being other than L1 | |
| 4 | L4₹28.3 L+₹2.9 L (11.3%)Rejected-Finance 103 HARIAKSH PLAZA HOSPITAL ROAD BHUJ KUTCH GUIARAT 370001 | BHUJ | KUTCH | GUJARAT | 370001 | L4 | Rejected-Finance Being other than L1 | |
| 5 | L5₹28.9 L+₹3.5 L (13.7%)Rejected-Finance | L5 | Rejected-Finance Being other than L1 |
Tender Value
₹35 L
EMD Value
₹70,000
Closing Date
2 Aug 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE NAMS
GE NAMS KHASA CANTT AMRITSAR
CERTAIN REPAIR TO PALERAM ENCLAVE AND SANGHARA ENCLAVE AT NAMS
2022_MES_537395_1
GE NAMS-40/2022-23
Open Tender
Civil Works
Item Rate
GE NAMS KHASA
CLASS D CATEGORY a(i)
7 documents required · 7 mandatory
₹500
GE NAMS
₹70,000
Yes
2 Sept 2022
12 Jul 2022
4 Aug 2022
12 Jul 2022
2 Aug 2022
26 Jul 2022
60 days
Amount
Taking down of shutter of any description size exc 1 sqm but n.exc 2 complete all as specified and directed.
S&F, 35 mm thick, 2nd class hard wood, factory made, glazed & skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. Sizes of members of shutters as specified in SSR Part I, Section 8, Clause 8.24 (a) complete all as specified and directed.
S & F factory made 35 mm thick plain, framed, panelled shutters with lock rail and panel of 9 mm thick BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on both faces and size of the members of shutter are as per IS – 1003 (Part – I) made of kiln seasoned & chemically pressure treated 2nd class hardwood rail and style complete all as specified and directed.
S&F for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides incl taking down shutter and cutting holes in frames of any type/wall and making good dismantled portion in PCC 1:2:4 type B-1 /cement plaster 1:4 as required and make finish good to the existing surface complete all as specified and directed.
S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel heaving a PVC sheet strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing.
S & F in repairs 18/19 mm thick prelaminated Particle board exterior grade, prelaminated both sides with decorative choice lamination , fixed with screws to timber/steel frame work as in cup board shutters/ shelves including 02 Nos 100mm aluminium handles, 01 No. 100mm hasp and staples including 6mm thick external teak wood lipping fixed to 18/19mm thick with nails and continous (piano) hinges mild steel bright finish or electrogalvanised wide of flap 40mm complete all as specified and directed.
Material & labour for box type steel window 1.25 mm thick made of ERW tube P-Section of size 60 x 25 mm double rebated outer frame comprise of glazed skeleton shutter(two gauged shutters and two glazed shutter) of ERW tube P-Section size 50 x 20 mm and 1mm thick one/two Nos openable leaf consisting of two Nos sash bar of T-Section 20x3mm welded to frame with one No Vertical mullion of ERW box type T-Section of size 60 x 25 mm and 1.25 mm thick and FI 2 mm thick welded / screwed to frame for fixing of glass including fittings and fixture like Handle, Tower Bolt, stopper, cleat, pintal hinges, hold fast etc. (a) Hold Fast, 150mm long of 120mm x 3 mm made to shape -04 Nos per window. (b) Handle of Z sec 20mm x 25mm, 100 mm long -1 No per leaf (c) MS Tower bolt 150mm long - 2 No per leaf (d) Z Sec 20mm x 25 mm, 100 mm long stopper - 1 No per leaf (e) Cleat 55 mm long of hollow square 15mm x 20mm x.63mm welded to hinge -1 No per leaf. (f) MS Pintal hinges of size 75mm x 12mm - 2 Nos per leaf (g) 10 mm square guard bar, 10 cm centre to centre. (h) 25x4 mm flat iron all around for joint of both frame. (j) One coat of Red oxide primer to MS window and guard bar. Note : Including taking down old steel / wooden window and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.
S & F mild steel box type ventilator fixed type with glazing bar with mesh & glass as per drg No. CEJZ/TD-06/07 dt 07.06.07 incl 12mm square guard bar 10cm c/c and two coat of synthetic enamel paint over one coast of primer complete all as specified and directed. Note : Including taking down old steel ventelator and making good dismantled portion with PCC 1:2:4 type B0 including hold fast PCC (four No’s for Each window) & around required plaster in CM 1:4 and match with existing finishing complete all as specified and directed by Engineer-in-charge.
M&L for preparation of new wooden Surfaces of any description, not otherwise, described, over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified as directed.
M&L preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified.
S&F Butt hinges medium weight size 100mm cold rolled mild steel welded to steel chowkhat and complete all as specified and directed.
S&F 150mm aluminium handle cast type anodised complete all as specified as directed.
S & F 150 mm aluminium anodised barrel tower bolt of extruded section with bright bolt complete.
S&F mild steel pressed handles, oval type stove enamelled 150mm for door.
S&F MS tower bolt stove enamelled black with bright bolt 150mm.
S&F MS sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on steple plate and fixed to 300mm long.
S&F in repairs MS sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts four on bolt plate and two on staple plate and fixed to 300mm long.
S&F in repair 300mm mild steel ordinary rat tail rod pattern spring including roller plate including fixing with nailsd/ bolts or welded compete all as specified.
S&F 3 mm thick sheet glass ordinary quality & glazing with oil putty in squares not exc. 0.50 sqm in each pane including Hacking out old broken glass of any thickness or size or description from the metal frame, punching or drilling out glass pins complete all as specified as directed.
S & F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
S & F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed.
M&L framed work as in doors of angle or other section complete drilled for fixing sheeting with all fitting and fixture complete all as specified and directed.
Dismantling of brick works in cement mortar complete all as specified and directed.
M & L for brick work with sub class 'B' bricks in cm (1:6) straight or curved on plan exc 6 mtrs mean radius, complete all as specified and directed.
ditto above but except bricks
Taking down cement plaster on brick or stone walls incl racking out joints etc,hacking for key, scrubing down with water etc & dispose off debris upto a distance exc. 500 mtrs but n.exc 1.5 Km where directed complete all as specified.
M&L, Rendering 15mm thick in CM 1:6 on of brick work or concrete surface finish even and smooth (w/o using extra cement) complete all as specified and directed..
M&L, Rendering 15mm thick in CM 1:4 on of brick work or concrete surface, finishes even and smooth (w/o using extra cement) complete all as specified and directed.
M&L, Rendering 10 mm thick in CM 1:3 over concrete surface as on ceiling finish even and smooth w/o using extra cement complete all as specified and directed.
M & L three coat of white wash incl preparation of new plaster surface of ceiling complete all as specified and directed.
M&L prepartion of new plastered surfaces of walls and applying two coat of Cement Based Paint over one coat of alkali resistant primer complete all as specified and directed.
M&L for preparation of new plastered surfaces of walls, pillars cornices etc and applying two coat of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and directed.
Supply only water proofing compound ISI marked complete all as specified and directed.
Material and labour for repairing of RCC projection, chajjas, facia,bands, shelves, beams, RCC railing, balcony and similar works by dismantling of loose/ disintegrated portion RCC at any height and in any situation (including provn of support, formwork and as required with wire mesh) and dubbing/ filling with PCC (1:2:4), type B-0, using 12.5 mm graded aggregate,15 to 25 mm thick after applying cement slurry @ 3 kg/sqm, finished even and smooth to desired shape and match with existing surfaces complete all as specified and directed.
Dismantling floor hearth or wall tiling incl cement mortar bedding removing serviceable tiles to stone and rubbish off the premises complete all as specified and directed.
S&F Glazed ceramic colour tiles in vertical surface 300x200mm x 7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 10mm thick cement plaster in CM 1:6 incl taking down old tiles / slab complete all as specified as directed.
S&F non skid ceramic light coloured/grained tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over and including 15mm thick screed bed in CM 1:6 in floor incl taking down old tiles / slab complete all as specified and directed
S&F Non Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm thick screed bed or bedding layers in CM 1:6. incl taking down old tiles / slab complete all as specified and directed.
M&L,Green marble 15-17 mm thick over cement screed bed laid on 15 mm thick CM 1:4 and jointed with grey cement slurry mixed with pigment ot match the shade of the slab / staircase / steps incl rubbing and polishing incl rounding to edge of marble incl dismantiling of stone slab and tiles of any discription or thickness in floors / aprons etc complete all as specified and directed.
Dismantling brick tiles or terracing single layer as in roofing complete all as specified and directed.
Demolition of mud in roofs, any thickness, including plastering and leeping (whether full thickness removed or only a part thereof) and dispose off debris from site exc 500 mtr complete all as specified.
M & L 50mm avarage thickness PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate as roof padding ,haunching, sub base floor incl water proof compound complete all as specified and directed.
M&L company approved applicator for preparation of roof surface & applying evenly a tack coat of industrial bitumen primer 85/25 grade @ 1.2 Kg/Sqm including APP based polymeric membrane minimum weighing 3 kg/sqm and minimum 3 mm thick reinforced wih polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application, joints to be touched hot and width of overlaps not be less than 150mm complete all as specified and directed.
M & L for applying two coats of undiluted thick of acrylic reinforcement liquid applied elastomeric water proofing membrane with UV resistance properties and solar refective properties over one coat of primer (1:3, Dilution:water) Note: Gap between each coat will be 6 hrs) complete all as specified and directed.(Make : Asian paint, Sika, Fosroc).
Demolition of cement concrete (un-reinforced)in ground floor and paving n. exc 15 cm thick below or above ground level & dispose off debris upto a distance exc. 500 mtrs where directed complete all as specified and directed.
M & L 50 mm thick PCC 1:3:6 type C-1 (using 20mm grade stone agg) as in plinth protection even and smooth without using extra cement complete all as specified.
Demolition of cement concrete ( Unreinforced) Roofs, floors (other than ground floors), and similar suspended work and dispose off debris upto a distance exc. 500 mtrs but n.exc 1.5 Km where directed complete all as specified and directed.
M & L for PCC 1:5:10 type E2 (using 40 mm graded stone aggregate as in sunken floor,sub base etc finish even and rough to receive further treatment complete all as specified and directed..
M&L, Rendering 10mm thick in CM 1:3 with WPC in sunken floor incl cleaning of surfaces complete all as specified and directed..
S & F in repair 15mm bore medium grade galvanized steel tubing with all fitting and fixed to concield in walls, celling or in floors etc complete all as specified and directed
S & F in repair 20mm bore medium grade galvanized steel tubing with all fitting and fixed to walls, celling or in floors complete all as specified and directed
S&F in repair 15mm bore bib tap cost copper alloy CP fancy type long body with crutch or butterfly handle screwed down iron pipe complete.
S&F in repair15mm bore angle cock cast copper alloy CP fancy type of long body screwed down high pressure with crutch or butterfly handle & screw both end for iron pipe or for Unions complete all as specified.
S & F in repair 15 mm Pillar taps, fancy type cast copper of long body alongwith capstan heads, chromium plated,swan neck screwed down high pressure , with or without coppered ‘H’ or ‘C’ with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified.
S&F in repair 15mm bore stop cock concealed long shank chromium plated fancy type screwed down high pressure with crutch or butterfly handle complete all as specified and directed.
S&F, in repair vitreous china squatting pan, Orrisa pattern size 580x440mm white incl PVC P trap, complete all as specified and directed .
S&F, in repair PVC flushing cistern low level white with all accessories of 10 ltrs capacity incl flushing pipe, brackets complete all as specified and directed.
S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with drainage board of size 915 x 460 mm with plugs, washers and PVC wastes pipe incl bedding in cement mortar on to dwarf wall or including fixing cantilever brackets of angle iron 50x50x6mm and connecting union to pipe, bowl size 410 x 330 x 160 mm complete all as specified as directed.
S&F in repair PVC waste pipe 32mm to 40mm dia (corrugated) for wash hand basin/sink complete all as specified and directed.
S&F in repair Stainless steel Plate Racks 1mm thick, 750x750x250mm and thickness of sheet shall be 0.63mm , with folded edge glossy finish complete all as specified as directed.
S&F in repair mild steel powder coated curtain rods 20mm dia of approved quality incl bracket, knobs etc complete all as specified as directed.
S & F in repair CP grating 125mm dia/hinged/ circular of approved make and fixing with cement mortar 1:3 as in repair all as specified.
Dismantling PVC pipe any dia fixed to Floor & wall with any type of joints.
S&F in repair PVC (SWR) pipe 110 mm dia single socketed with rubber ring joint incl MS bracket fixed in wall complete all as specified as directed.
S&F in repair PVC (SWR) bend 110 mm with access door complete all as specified
S&F in repair shower cast copper alloy with revolving joints incl shower arm 190mm long light baby with wall flange with chrominum plated brass screw complete all as specified and directed.
S&F tubular towel rail 600mm long, 20mm dia 'D' type CP rail with fixed in wall.
S&F in repair plastic seat cover white/coloured (as required at site) for water closet pedestal pattern with flat bottom and steel chromium plated hinging device complete all as specified and directed.
S&F in existing position the new vitreous chinaware wash down water closet (pedestal pattern) With plastic seat cover all as specified and directed .
S&F in repair 32mm bore Brass chromium plates bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap complete all as specified as directed.
S&F PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
S&F in repair wall mixer 3-in-1 system with provision for bath overhead shower 15mm bore (fancy type) cast copper alloy with capstan head, CP screwed down high pressure with long screwed both ends for iron pipe union complete all as specified. ( Make : Jaguar or equivalent directed by Engr-in-Charge )
S&F in repair vitreous chinaware wash hand basin light colour/white of size 550x 400cm flat back or angle stay, brass chromium plated waste coupling, chain, plug, porcelain rubber stopper, brackets,32mm bore PVC waste pipe of appropriate length complete all as specified and directed
S&F in repair PVC syphon kit suitable for low level flushing cistern complete all as specified and directed.
S&F in repair brass ball valve 20mm bore high pressure with polyethylene float and flynut complete screwed for iron pipe or brass ferrule brass road complete all as specified and directed.
S&F in repairs aluminium strip 30mm wide, 1.5mm thick and 1.00 metre length powder coated with rubber rings to be fixed with screws on bottom of existing shutters to guard from snakes/ frogs complete all as specified.
S&F in repair 150mm floor door stopper of aluminimum alloy body and tongue anodized with hard drawn steel spring
M&L 75mm thick cement concrete Type D-2 1:4:8 using 40mm graded stone aggregate as in sub base complete all as specified as directed.
M & L machine pressed glazed and coloured chequered tiles of size 300 x 300 x 25 mm thick laid over 15 mm thick screed bed in CM 1:6 bedded and jointed in neat cement slurry, incl dismantiling of stone slab and tiles of any description or thickness in floors / aprons etc complete all as specified and directed.
S&F in repair cast iron floor trap with grating including jointing to waste pipe to fixed in cement concrete type B1 1:2:4 size 75mm
Dismantiling of cast iron pipe including fitting jointed in cement or led joint 100 mm bore.
ditto but 75 mm bore
S&F in repair cast iron soil waste and vent pipe (sand cast) in any length with or without ears with cement joints fixed to wall 100mm bore all as specified and directed.
S&F in repair cast iron soil waste and vent pipe (sand cast) in any length with or without ears with cement joints fixed to wall 75mm bore all as specified and directed.
S&F in repair cast iron soil waste and vent pipe (sand cast) laid in trenches or in floor with cement joints 100mm bore all as specified and directed.
S&F in repair cast iron soil waste and vent pipe (sand cast) laid in trenches or in floor with cement joints 75mm bore all as specified and directed.
S&F stack clamp out of 50mmx5mm flat iron and 16mm dia round iron stay including bolts and nuts and securing end of stay to wall or roof
(a) 100mm bore
(b) 75mm bore
S&F CI branch pieces single equal or unequal ordinary or inverted (Spigot or socketed type) or paralet branches:-
(a) 100mm bore
(b) 75mm bore
S&F CI door bend
(a) 100mm bore
(b) 75mm bore
S&F cast iron vent cowl suitable for 100mm bore pipe
S&F for rotational moulded polyethylene 500 litres triple layer water storage tanks cylindrical vertical with closed top hoisted and fixed in position incl 20 mm dia float valve with aluminium fitting incl old disconnecting and taking down complete all as specified and directed.
BISHAN DASS
Santokh Singh and Associates
M/s Vijay Construction Co.
tarvinder singh
M/s MAHAJAN CONSTRUCTION CO.
H.B AND CO.
tarlok singh contractor
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .