Loading…
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Tender Value
Refer Docs
EMD Value
₹54,700
Closing Date
5 Sept 2025, 9:30 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Engineering Wing of Health and Family Welfare Department
Sri. Harish
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District
EWHFWD/2025-26/BD/WORK_INDENT1053
EWHFWD/2025-26/BD/WORK_INDENT1053
Reserved
Buildings
Two Tender Document System(Two Cover)
EWHFWD Executive Engineer Office Bengaluru
8 documents required · 8 mandatory
The Mandating satisfactorily completion as a prime contractor for at least any construction work of value not less than Rs.13.67 Lakh
Executed in any one year, the following minimum quantities of work: 1) RCC/PCC 66.00 Cum 2) TMT Steel 5031.00 Kgs. 3) Plastering 757.00 Sqm 4) Flooring -Ceramic / Vitrified Tiles / Granite / Dadoing 230.00 Sqm
The Tenderer or his identified sub-contractor should possess required valid electrical license for executing building electrification works issued by KPWD/Government electrical Inspectorate and should have executed similar electrical works totalling Rs. 1.83 Lakhs in any one year in the last Five year.
The Tenderer or his identified sub contractor should possess valid license for executing water supply/sanitary engineering works issued by BWSSB/KUWS&DB and should have executed similar water supply/sanitary engineering works totalling Rs. 1.20 Lakhs in any one year in the last Five year.
KPWD Class-III & Above Civil Contractor
Tenderers who meet the above specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under: Assessed available tender capacity- (AxNx5.0-B) where, A-Maximum value of civil engineering works executed in any one year during the last five years. N-Number of years prescribed for completion of the works for which Tenders are invited. B-Value of existing commitments and on-going works to be completed during the next 6 months
GST Registration Certificate
The tenderer should have been Achieved in at least One financial years a minimum financial turnover (in all classes of civil engineering construction works only) of value Rs. 54.65 lakhs. In the last five year i.e., 2020-21, 2021-22, 2022-23, 2023-24 and 2024-25
Liquid assets and/or availability of credit facilities of no less than Rs. 16.40 Lakhs (Credit lines/letter of credit/certificates from banks for meeting the fund requirement etc.,)
₹1,370
₹54,700
21 Aug 2025
21 Aug 2025
6 Sept 2025
25 Aug 2025
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District Dismantling Works
Demolishing RCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-charge PWD SR...
Demolishing brick work manually by mechanical means including stacking of serviceable material and disposal of unserviceable material to the appropriate disposal area as per direction of Engineer-in-c...
Dismantling of cement concrete platform along with curtain walls and base concrete etc. including stacking of useful materials near the site and disposal of unserviceable materials to the appropriate ...
Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete andstacking to the appropriate disposal area as per direction of Engin...
Loading and Unloading of Stone Boulder or Stone aggregates or Sand or Kankar or Moorum Tipper 5.5 m3 PWD SR 2023 24 Volume 3 Page No 3 Item no 1.1A ---- Complete with all lead and lift loading and unl...
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District GF Civil Works
Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm removal of stumps of trees cut earlier and disposal of unserviceable m...
Earth work in surface excavation by mechanical means for lowering & leveling the ground for all works other than foundation in all kinds of soils & upto depth not exceeding 300mm as per drawing and te...
Earth work excavation for Foundation by mechanical means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution li...
Providing and laying in position plain cement concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS...
Providing and injecting chemical emulsion for Pre-constructional Anti-Termite Treatment, creating continuous chemical barrier under and around the column pits, walls, trenches, basement excavation, to...
Providing and laying in position Reinforced cement concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixe...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Construction of Embankment by excavating the available approved Gravel/Murrum deposited at a place or borrow pits during or prior excavation with all lifts and lead, transportation to site, spreading,...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works Irrigation works & super structure works of bridges upto 3.50 m height. The gra...
Supplying fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints tying wi...
Providing and laying in position Reinforced cement concrete for all Sub structures of building Irrigation works Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 m ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg m3 and minimum compressive strength of 4.00 N mm2 conforming to IS 2...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing M.S. grills of required pattern in frames of windows etc with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to steel w...
Providing and fixing 1mm thick MS sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround door ...
Providing and fixing IS 12817 marked stainless steel butt hinges withstainless steel screws etc. complete 125x64x1.90mm ---- Complete with all lead and lift loading and unloading charges etc., work sh...
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 200x10mm ---- Complete with all lead and lift loading and unloading charges etc., work should b...
Providing and fixing chromium plated brass handles of 100 125 mm with necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out...
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. Complete ---- Complete with all lead and lift loading and unloading charges etc., work should...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc complete ---- Complete with all lead and lift loading and unloading charges etc., work should be ca...
Providing and fixing expansion hold fasteners on C.C R.C.C. Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- Com...
Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE (Thermo Plastic Elastom...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface ceiling including rounding off corners wherever required smooth rende...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...
Providing and applying white cement based putty of average thickness 1 mm of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spec...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand ...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, ex...
Fixing glazed Ceramic Vitrified floor tiles with cement based high polymer modified quick set tile adhesive (Water based) conforming to IS: 15477 in average 3mm thickness ---- Complete with all lead a...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal s...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Applying priming coat With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron steel works including preparing the surface after thorougly cleaning oi...
Painting with black anti-corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil grease, ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil grease dirt...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust mortar drops and foreig...
roviding and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc. including welding, grinding buffing, polishing and making curvature (wherever required) and fitting...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District FF Civil Works
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works Irrigation works and super structure works of bridges upto 3.50 m height The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works Water works Irrigation works & super structure works of bridges upto 3.50 m height The gra...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works Irrigation works & super structure works of bridges upto 3.50 m height The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The ...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/welding joints, tying ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x100x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing Salwood frames of doors, windows, clerestory windows, ventilators and other frames, wrought, framed or assembled including making plaster groves (excluding cost of cement concrete and side c...
Fixing of door frame in an existing opening including embedding frame in floor and walls after cutting masonry for holdfasts for embedding holdfast in cement concrete 1:3:6 of 20mm and down size grani...
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel...
Providing and fixing flush door shutter made out of solid core block board type, well seasoned , chemicaly treated hard wood battens and internal frame with minimum 45 mm wide wooden frame alround doo...
Providing and fixing IS : 12817 marked stainless steel butt hinges withstainless steel screws etc. complete :125x64x1.90mm ---- Complete with all lead and lift loading and unloading charges etc., work...
Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete :200x10mm ---- Complete with all lead and lift loading and unloading charges etc., work should ...
Providing and fixing chromium plated brass handles of 100/125 mm with necessary screws etc. complete ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out...
Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work shoul...
Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. ---- Complete with all lead and lift loading and unloading charges etc., work should be...
Providing and fixing expansion hold fasteners on C.C. /R.C.C./Brick masonry surface backing including drilling necessary holes and the cost of bolt etc complete.Fastener with threaded dia 12 mm ---- C...
Providing & fixing of 3 track x 2 panel sliding windows made out of multi chambered UPVC(Matching to RAL-9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastome...
Providing & fixing of louvered ventilator made out of multi chambered UPVC(Matching to RAL 9016) sections and with minimum TiO2(Titanium Dioxide) at 6PHR with TPE(Thermo Plastic Elastomer) and lead fr...
Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface ceiling including rounding off corners wherever required smooth rende...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick/stone masonry including rounding off corners wherever required smo...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spe...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand &...
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622, of approved make in all colours, shades, exc...
Fixing glazed Ceramic Vitrified floor tiles with cement based high polymer modified quick set tile adhesive (Water based) conforming to IS 15477 in average 3mm thickness. ---- Complete with all lead a...
Providing and laying 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nomin...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops an...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required...
Applying priming coat: With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron steel works including preparing the surface after thorougly cleaning o...
Painting with black anti corrosive bitumastic paint of approved brand and manufacture to give an even shade :Two coats on new work including preparing the surface after thorougly cleaning oil grease, ...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil, grease dir...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade :Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and for...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes channels plates etc including welding, grinding, buffing polishing and making curvature (wherever required) and fitting t...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace Chajjas Sunken portion of WC Bathroom cold applied P...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District TF Civil Works
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height The g...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works and super structure works of bridges upto 3.50 m height The...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The g...
Providing and laying in position Reinforced cement concrete for all Super structures of building , Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height The g...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...
Providing and laying in position Reinforced cement concrete for all Super structures of building Road works, Water works, Irrigation works & super structure works of bridges upto 3.50 m height. The gr...
Supplying, fitting and placing TMT FE 550/550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping welding joints, tying ...
Providing and laying in position Reinforced cement concrete for all Sub structures of building, Irrigation works, Sub structure works of bridges, Drain works & other parallel works from 0.50m to 3.50 ...
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 6 mm cement plaster finished with a floating coat of neat cement of mix :1:3 (1 cement: 3 fine sand) to concrete surface ceiling including rounding off corners wherever required smooth rende...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing 20 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement to brick stone masonry including rounding off corners wherever required smo...
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer over the plastered wall surface to prepare the surface even and smooth complete as per spe...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Forming groove of uniform size in the top layer of plaster as per approved pattern including repair to the edges of panels and finishing the groove complete as per specifications and direction of the ...
Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt dust, mortar drops and ...
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 g litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required s...
Applying priming coat: With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) including preparing the surface after thorougly cleaning oil grease dirt...
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade Two coats on new work after thoroughly brooming the surface to remove all dirt, dust, mortar drops and fore...
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding buffing, polishing and making curvature (wherever required) and fitti...
Providing and laying water proofing treatment to the Roof with PU based single component elastomeric pure polyurethane based coating on New terrace/Chajjas/Sunken portion of WC:Bathroom, cold applied ...
Providing 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix: 1:4 (1 cement: 4 fine sand) to brick masonry including rounding off corne...
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District WS GF
Providing and fixingPVC waste pipe for sink or wash basin including PVC waste fittings complete 40mm dia pipes From wash basin waste lines ---- Complete with all lead and lift loading and unloading ch...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc. for EXTERNAL WORKS w...
PVC pipe - OD 75mm and 6 Kg sqcm waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in C...
PVC pipe - OD 110mm and 6 Kg sqcm sanitary lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer ...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS 5382 leaving 10mm gap for thermal expansio...
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382,leaving 10mm gap for thermal expans...
PVC pipe - OD 75mm and 6 Kg sqcm - (Shaft Drainage) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engine...
PVC pipe - OD 110mm and 6 Kg sqcm - (Shaft Drainage) ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engin...
Providing, fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring solvent cement followed by application ...
Supplying, fixing, testing and commissioning of Counter basin consisting of size: 420 x 590 x 195, Shape oval of ISI or BIS Standards.complete as directed by the Engineer in charge.(Rate approved Well...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular ...
Providing and fixing C P brass shower rose with 15 or 20 mm inlet 150 mm diameter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specifi...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality and make as approved by Engineer in charge ---- Complete with all lead and lift loading and unloading char...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 g. ---- Complete with all lead and lift loading and unloading charges etc., wo...
Providing and fixing white vitreous china extended wall mounting water closet of size 780x370x690 mm of approved shape including providing & fixing white vitreous china cistern with dual flush fitting...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.Pflush bend with fittings & CI brac...
Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc., complete as directed by the Engineer in charge. ALD-577 ( Jaguar make or Equale...
Providing & fixing White vitreous china water closet squatting pan (Indian type) along with "S" or "P" trap including dismantling of old WC seat and "S" or "P" trap at site complete with all operation...
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard ...
Providing and fixing white vitreous china laboratory sink with C.I. brackets, CP brass chain with rubber plug, 40 mm C.P brass waste and 40mm CP brass trap with necessary C.P. brass unions complete, i...
Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model): CON-CHR-347KN for pantry sink with CP wall flange etc. Standard make confirming to ISI standa...
Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including...
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets, cutting and making good the wal...
Supplying and fixing PCC Pedestal 450 x 250 x 200mm with MS sloted angle iron brackets supports with necessary drilling holes to suit the insertion of pipe clamps deburning etc., as per detailed drawi...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipe...
Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not ...
Supplying, installing, testing and commissioning of approved make full way lever operated forged brass ball valve of brass body with forged brass hard chromeplated steel ball tested to a pressure not ...
Brass bib-cock 15 mm dia ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work
Providing and constructing load bearing wall with Solid Concrete blocks of size 400x200x200mm having block density more than 1800kg/m3 and minimum compressive strength of 4.00 N/mm2 conforming to IS 2...
Providing 15 mm cement plaster with cement mortar 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement on the rough side of single or half brick wall including rounding off corne...
Providing and placing on terrace (at all floor levels) polyethylene water storage tank,IS:12701 marked,with cover and suitable locking arrangement and making necessary holes for inlet,outlet and overf...
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District WS FF
Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fittings complete 40mm dia pipes, From wash basin waste lines ---- Complete with all lead and lift loading and unloading ...
Providing and fixing normal gauge polythene pipes of approved quality with special flange compression type fittings of approved make including trench excavation and refilling etc for EXTERNAL WORKS wi...
PVC pipe - OD 75mm and 6 Kg sqcm waste lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in C...
PVC pipe - OD 110mm and 6 Kg sqcm sanitary lines ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer ...
Providing fixing, testing and commissioning of deep seal PVC multi inlet floor trap of self cleansing design moulded or fabricated with CP grating, rubber ring solvent cement followed by application o...
Supplying, fixing, testing and commissioning of Counter basin consisting of size 420 x 590 x 195, Shape oval of ISI or BIS Standards.complete as directed by the Engineer in charge (Rate approved Welln...
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular ...
Providing and fixing C P brass shower rose with 15 or 20 mm inlet 150 mm diameter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specifi...
Providing and fixing CP Brass 15 mm nominal dia Single lever telephonic wall mixer of quality & make as approved by Engineer in charge ---- Complete with all lead and lift loading and unloading charge...
600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm weighing not less than 190 g ---- Complete with all lead and lift loading and unloading charges etc., work...
Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc complete as directed by the Engineer in charge ALD-577 ( Jaguar make or Equalent ...
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C I b...
Supplying, fixing, testing and commissioning of CP health faucet Hand operated spray unit (instant type) CP Crutch etc complete as directed by the Engineer in charge. ALD-577. ( Jaguar make or Equalen...
Providing and fixing Stainless Steel A ISI 304 (18 8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm including painting of fittings and brackets, cutting and making goo...
Supplying, fixing, testing and commissioning of Sink Cock with Swinging Casted Spout (Wall Mounted Model) CON-CHR 347KN for pantry sink with CP wall flange etc Standard make confirming to ISI standard...
Providing and fixing in position Exposed Part Kit of Concealed Stop Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange (Compatible with ALD-087FT) ( Jaguar make or Equalent ) including...
Providing and fixing wash basin with C.I brackets, 15 mm C P. brass pillar taps, 32 mm C P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the wa...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i c fixing the pipe with cla...
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, ic fixing the pipe with clam...
Brass bib-cock 15 mm dia ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer in Charge of the work
Construction of Aysuhman Arogya Mandir at Mudahadadi, Davanagere Taluk in Davanagere District Electrical Works
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1 5Sqmm (Phase and Neutral) and 1x1 0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirm...
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1 5Sqmm (Phase and Neutral) and 1x1 0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirm...
Supplying and wiring adopting loop system in existing PVC Conduit or casing capping using 2x1 5Sqmm (Phase and Neutral) and 1x1 0 sqmm (Earth wire) FRLS multi strand PVC insulated copper wire (confirm...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or C C ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or C C ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or C C ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or C C ...
Supplying and flush mounting powder coated or galvanized metal box suitable for mounting modular switch plates The box should be firmly flush mounted after due groove cutting in Brick or Stone or C C ...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal...
Supplying and fixing superior quality modular switch mounting polycarbonate plate with necessary supporting back plate with required nos of machine screws bolts nuts etc complete on the existing metal...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps One Way Switch ---- Complete with all lead and lift loading and unlo...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps Two Way Switch ---- Complete with all lead and lift loading and unlo...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps Three Way Socket ---- Complete with all lead and lift loading and un...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 Stepped Fan Regulator ---- Complete with all lead and lift loading and unlo...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 Amps Bell Push ---- Complete with all lead and lift loading and unloading...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 32Amps DP Switch ---- Complete with all lead and lift loading and unloading...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 6 or 16 Amps universal socket ---- Complete with all lead and lift loading ...
Supplying and fixing of modular switch and connected accessories on existing modular switch plate as per IS 3854 and IS 1293 TV or Telephone socket ---- Complete with all lead and lift loading and unl...
Supplying and fixing one of 230 volts Ding dong bell and a flush type bell push with gang box fixed on necessary wooden or rawl plugs using NF screws with Remote Ding Dong Bell ---- Complete with all ...
Supplyin and Fixing Metal Fan Box with Round Hook ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direction of Engineer...
Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends metal or PVC junction boxes adhesive paste etc and running before concreting the slab The conduit sho...
Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends metal or PVC junction boxes adhesive paste etc and running before concreting the slab The conduit sho...
Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends metal or PVC junction boxes adhesive paste etc by groove cutting in wall and fixing by bracing U or J...
Supplying heavy gauge PVC conduit pipe dia mm thick confirming to IS 2509 with suitable size bends metal or PVC junction boxes adhesive paste etc by groove cutting in wall and fixing by bracing U or J...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...
Wiring for lighting or power circuit using one of FRLS PVC insulated 1100V grade multistrand copper wire with low conductor resistance single core in open or concealed system of wiring with specified ...
Supplying and fixing regular MCB distribution boards on wall or wood board I flush mounting using required clamps bolts nuts etc. with provision for fixing suitable type capacity MCB's single phase I ...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON or OFF energy cross-3 with Short circuit breaking c...
Supplying fixing and wiring Earth Leakage Miniature Circuit Breaker [ELMCB] 240 or 450V up to 300mA sensitivity on existing wood or panel board 16-25 A 2 pole ---- Complete with all lead and lift load...
Supplying and drawing Flexible Multicore Cable manufactured with electrolytic grade flexible copper with low conductor confirming to IS 8130-1984 and (Virgin) PVC insulation sheathed suitable for work...
Supplying fixing wiring earth electrode for grounding conduits I C cut out and other equipment's on the meter board using 40 mm dia 2 90 mm thick GI pipe 2 5 m long buried in a pit The pit should be f...
Supplying of feet PVC Batten with integrated LED tube W with high quality diffuser with Life of 25000 burning hours and 70% lumen maintenance with CRI 80 Power Input: 220-240V at 50 or 60Hz and Power ...
Supplying of recess mounting nonintegrated type LED down light W luminaire comprising of pressure diecast or extruded aluminum housing with spring loaded false ceiling clA LED of Power or COB with CCT...
Supplying and fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI 70% efficacy 80 lumen per W life 25000 burning hours and Compliance to I...
Supplying and fixing of retrofit type LED bulb W with OPAL acrylic diffuser comprising of LED source with CCT 6500 degree K CRI 70% efficacy 80 lumen per W life 25000 burning hours and Compliance to I...
Supply of LED Streetlight luminaire with pressure die cast aluminium housing body for optimal thermal dissipation Lamp compartment comprising of anti glare clear diffuser with Injection moulded polyca...
Supplying and Fixing of Special Type pigmy and candle lamp Operating voltage range from 180V to 265V 50Hz AC power Supply ---- Complete with all lead and lift loading and unloading charges etc., work ...
Supplying exhaust fan of 1440 RPM of 300mm (12") size with bracket blades complete for light duty suitable to operate on 230V 50Hz AC Supply ---- Complete with all lead and lift loading and unloading ...
Supplying capacitor type ceiling fan complete with down rod blades shackle canopies etc for operation on 230 volts 50 cycles Single phase AC supply conforming to ISS-374-1979 and with double ball bear...
Fixing all types and all capacities of fluorescent or false ceiling or spot light or CFL or LED fittings indoor on the wall or ceiling or rafters or girders using 23 or 0 0076” twin twisted PVC insu...
Fixing one exhaust fan after making a suitable nitch in the wall and finishing with cement mortar and colouring to match the existing wall or brackets with bolts and nuts and a 5 amps ceiling rose wit...
Supplying and fixing telescopic M S bracket fabricated by using 0 5m length 4” dia telescopic M S pipe with 2” dia 1 5m long M S bracket and are welded with suitable angle using 6mm thick M S shee...
Fixing halogen or metal halide or SVL or IL or LED floodlight fitting over existing pole or wall ceiling including clamps bolts nuts and wiring using suitable capacity wires ---- Complete with all lea...
Fabricating supplying and mounting MS box made out SWG suitable for floor I wall mounting fully weather proof with provision for better heat dissipation provided with hinged front cover equipped with ...
Supplying amps rated 3phase with neutral bus bar using required capacity electrolytic aluminum strips covered with heat shrinkable coloured PVC sleeve mounted on phenoliciFRP or DMC insulator which ar...
Supplying and fixing angle iron frame work iabricated out of M S angle iron and M S flat with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint 40x40x6mm ---...
Supplying and fixing angle iron frame work iabricated out of M S angle iron and M S flat with bolts washers etc and painted with 2 coats of red oxide and then two coats of approved paint 50x100x50x6mm...
Supplying and fixing Moulded Case Circuit Breaker (MCCB) over the existing wood or panel board using necessary screws bolts nuts and wiring complete Protection of Overload and Short circuit with therm...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON or OFF energy cross-3 with Short circuit breaking c...
Supplying and fixing miniature circuit breakers on existing MCB distribution boards using necessary fixing materials and 'C' Type curve indicator ON or OFF energy cross-3 with Short circuit breaking c...
Supplying and fixing of Porcelain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 32 A ---- Complete with all lead and lift loading and unloading charges e...
Supplying and fixing of Porcelain fuse channel with cut out on existing wooden or panel using necessary nuts bolts and washers 63 A ---- Complete with all lead and lift loading and unloading charges e...
Supplying of on load change over switches 4 poles AC-23A Duty 415V 50Hz AC Supply With all accessories (SM Enclosure Sheet Metal Execution) upto 63 A ---- Complete with all lead and lift loading and u...
Supplying fixing and wiring rotary selector switch suitable for Ammeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and...
Supplying fixing and wiring rotary selector switch suitable for Voltmeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification a...
Supplying fixing and wiring 3 Phase Digital Ammeter or Voltmeter ---- Complete with all lead and lift loading and unloading charges etc., work should be carried out as per the Specification and direct...
Supplying and fixing of LED type panel board indicating lamp with required colour suitable for 230 or 440VAC 50 Hz 12 or 24V D C ---- Complete with all lead and lift loading and unloading charges etc....
Supplying fixing and wiring 50 or 5 to 400 or 5A 5VA burden Current Transformer Class 0 5 accuracy with Tape Wound ---- Complete with all lead and lift loading and unloading charges etc., work should ...
Supplying fixing and wiring Electronic Trivector Meter (ETV) 5 to 20A single phase Class-1 Accuracy with Temper Proof Energy Meter ---- Complete with all lead and lift loading and unloading charges et...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
30-KW-3_1053-Mudahadadi (ST).docx
Tender Document • 0.77 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .