ADDN / ALTN TO OR LIVING ACCN INCL TOILETS AT STN CELL HQ 101 AREA AND REVOCATION ADDN /ALTN TO TOILETS OF BLDG NO CANTT 20 AT ANJALEE COMPLEX AND PROVN OF ALUMINIUM PARTITIONS COVERING OF SHED AND ENTRY PROCH IN FRONT OF BLDG NO MES P 200 ( ECHS POL

Amount

AGE B/R SCHEDULE PART-I Taking down chowkats or frames n. exc 1.50 Sqm each with shutters (without taking off shutter from the frames) complete all as specified and as directed.

Dismantling floor, hearth , wall tiling including cement mortor bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 15mm bore of pipes complete all as specified and as directed.

Taking up or down steel tubing and disconnection, for 20mm bore of pipes complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing

S&F solid PVC door frame of size 50 mmx 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and as directed.

S&F 150 mm long aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and as directed.

S&F extruded aluminium alloy handles fabricated type anodised of size 150 mm complete all as specified and as directed.

S&F butt hinges 100 mm medium weight mild steel cold rolled and fixed complete all as specified and as directed.

S&F Aluminium alloy, anodised, sliding door bolt with hasp staple (bolt type) 300mm size and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks nexc 10 cm in width and settings in CM 1:4 type C1 1:3:6 (20mm graded aggregate) complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.18 sqm but n exc 0.36 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Labour only for chamfer , splays or arris in facework of Granite not exc 15mm wide complete all as specified and as directed.

Excavation in post holes not exiting 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete all as specified and as directed in soil loose soil.

M&L for steel work in tubular trusses incl special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 complete all specified and as directed

M&L for two coats of synthetic enamel paint on new steel surface exc 10 cm width or girth on 01 coat of primer (Red oxide Zinc chrome) incl preparation of new surfaces complete all as specified and as directed.

M&L for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs Brass CP angular stop cock fancy type with Capstan heads of complete all as specified and as directed make Jaguar/Marc/Parryware

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap complete all as specified and as directed.

M&L 75mm dia PVC(SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

S&F for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) bends 110mm dia complete all as specified and as directed

S&F PVC (SWR) bends 75mm dia complete all as specified and as directed

S&F Stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.

S&F PVC Connections 15mm size with PTMT Nuts of length 450mm and fixed, complete all as specified and as directed.

Supply and Laying Steel Water Tubing 15mm dia (Bore), Galvanised, ‘Medium Grade’ with all Fittings, fixed on Walls, Ceiling or laid in Floors or any other Situation, complete as all specified and as directed.

All as per Item No 30 above , but for 20mm dia (Bore).

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

S&F in repair Vitreous china WHB, white, flat back, size 550 x 400 mm including brackets, 32 mm waste coupling and 32 mm waste pipe all as specified and directed

S&F in repair Health faucet(ABS Body)mild steel chroumium plated suitable for 15mm dia pipe with 1.25metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F in repairs Vitreous China Rimless wall hung EWC including UF soft seat cover closed seat cover, hinges, accossories set size 370x545x370 complete all as specified and as directed. make Jaguar Cat Part No DRS -WHT - 37951 :- or equivalent in make cera, parryware or Hindware

S & F in repairs Towel rack 600mm long with lower hangers , stainless steel complete all as specified and as directed. make Jaguar Cat Part No:-AKP-35781PS or equivalent in Marc/Parryware/Prayag

S&F in repair single lever Basin mixer with popup waste with 450 mm long braided hoses of complete all as specified and as directed make Jaquar Cat Part No:- KUP-35051BPM or equivalent in Marc/Parryware/Prayag

S&F in repairs Soap dish holder complete all as specified and as directed make Jaguar Cat Part No:-AKP-35731P or equivalent in Marc/Parryware/Prayag

S&F in repairs Toilet roll holder with stainless steel flap complete all as specified and as directed Make Jaguar Cat Part No:- AKP-35753PS OR EQUIVALENT IN Marc/Parryware/Prayag

S&Fin repairs Towel ring sqare shape stainless steel of complete all as specified and as directed Make Jaguar Cat Part No:-AKP-35721P or equivalent in Marc/Parryware/Prayag

S&F in repairs corner glass shelf with bracket complete all as specified and as directed of make Jaguar Cat Part No:ACN-1173 or equivalent in Marc/Parryware/Prayag

S&F in repairs CP over head shower square shape of size 150x150mm of make Jaquar cat part No:OHS-CHR-1605 with CP shower arm of size 400x25x25 mm square shape for wall mounted showers flange of make Jaquar Cat partNo-SHA-455L400 or equivalent in Prayag/Hindaware/parryware

S&F in repairs CP single lever wall mixer 3-in-1 system with provision for bath hand shower & overhaed shower complete with 115 mm long bend pipe connecting legs & wall flange (without hand & ober head shower) of make Jaquar cat part No:OPP-15125PM or equivalent in Parryware/Prayad/Hindware

S&F CP Hand shower 24x24 mm sqaure shape single flow with Air effect (ABS body & face plate chrome plated) with Rubit cleaning system of make Jaquar cat part No:HSH-35537 with flexible tube in chrome finish 1.5 m long with nuts of make Jaquar cat part No:SHA-571 or equivalent in Parryware/Prayag/Cera

S&F Free standing shower enclosure without stablizer glass 8/10 mm thick with chrome finish (Size 801 -1200 ht 1950 mm of Make Jaquar cat Part No JSE-CHR 810F0812H19X or equivalent in Parryware/Prayag/Cera

Dismantling Timber scantlings 40 sqmcm and over in section in any position framed work complete all as specified and directed

Taking down chowkat or frame exc 1.5 Sqm but n.exc 4 Sqm each (without taking off shutter from the frame) complete all as specified and as directed.

Demolition of Brickwork/solid concrete block work built in Cement mortar complete all as specified and as directed.

Demolition of cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

Dismantling Wall and Ceiling Boards (Fibre ,Pulp,insulation ,etc)or insulation boards /slabs/blankets ,any thickness,including cover fillets complete all as specified and as directed.

M & L PCC 1:4:8 type D2 (using 40 mm graded aggregate) as in Foundation filling and mass concrete complete all as specified and as directed.

M&L for Cement concrete type B-1, 1:2:4 (20mm graded aggregate complete all as specified and directed

M&L for wrought second class hard wood in scantlings unframed and fixed complete all as specified and directed

M&L for preparation of wood and wood based materials, new or old of any description and girth not otherwise described and treated with creosote oil complete all as specified

M&L for 2nd class hard wood Plain fillets square , rectangular or triangular in section , clean swan secured with nails sectional area exc 13 sqcm nexc 25 sqcm complete all as specified and as directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing

S&F powder coated (min powder coating 50 micron) anodised aluminium frame for doors, windows , ventilators plain or sliding type with one or more rebates including joining cleat for fixing etc complete all as specified and as directed

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.

M&L for 4.80 mm thick sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for 4.80 mm thick frosted sheet glass quality and glazing fixed to aluminium frame exc 0.50 sqm complete all as specified and as directed.

M&L for cement concrete 1:3:6 type C2, 75mm thick as in plinth protection finished even and smooth with out using extra cement complete all as specified and as directed.

M & L for PCC 1:3:6 C2 (40 mm graded aggregate) as in surface channels and drains complete all as specified and as directed.

Extra for forming fair finished drain or channel 30cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stop ends complete all as specified and as directed.

M&L for vitrified tiles lightshade (square /rectangular) polished area of each tiles nexc 0.36 sqm sqm in floors laid over and incl. 15 mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

All as Per Item no 66 above but in vertical surfaces such as skirting / dado laid over and incl. a backing coat of 10mm thk CM 1:3 complete all as specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 16/18 mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab all as directed.

Taking down plastering on lathing (other than wire-netting), without removing lathing, in lime or cement mortar (one side only measured in cases where both sides are plastered complete all as specified and as directed.

M&L for rendering 15m thick on fair faces of lathing wall in CM 1:4 finished even and smooth without using extra cement complete all as specified and as directed.

Supply only Integral waterproofing compound complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of lathing wall in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed..

M&L for 15mm rendering in cement mortar (1:6) on brick/concrete surfaces finished the surface even and smooth without using extra cement complete all as specified and as directed.

M&LSolid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing as per specifiecations and drawing complete all as specified and as directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 6mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

M&L 75mm dia PVC(SWR)floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

S&F cutting chases, pinning in concrete block workmaking good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades shelves, lintels etc, and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10cm girth complete all as specified and as directed.

M&L for preparation of new wall surafces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

Complete removal of existing wall treatment surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete

Complete removal of existing treatment on old wall surfaces and applying two finishing coat of oil bound distempering over 1mm of wall care putty complete all as specified and as directed.

S&F in repair Vitreous china (Pedestal pattern) WHB, white, flat back, size 550 x 400 mm including brackets, 32 mm waste coupling and 32 mm waste pipe complete all as specified and as directed.

M&L for 18/19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-work complete all specified and directed

S&F extruded aluminium alloy handles fabricated fancy type anodised of size 100 mm complete all as specified and as directed.

S&F 0.90 mm thick pvc decorative laminates type 1 of surface finish color and pattern as approved fixed with approved adhesive as per manufactures instruction complete all as specified and as directed.

S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs , washers and wastes, incl bedding in cement moartor on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe onerall size990x420 double bowl with size of 410x330x160mm complete all as specified and as directed

S&F for stainless steel drawer box 500mm of any colour with provn for double rail rolling system complete all as specified and directed by Engr-in-charge

S&F ball bearing drawer channel of size 600 mm long complete all as sspecified and as directed by Engr-in-charge

S&F for clip on cabinet hinge full overlay complete all as specified and directed by Engr-in-charge

Excavation in post holes not exiting 0.5 cum, getting out returing, filling in and ramming earth and broken hard core/rubble mixed with earth with around the layers not exiding 25 cm each layers watering and removing surplus soil to a distance not exceeding 50 cm making good complete all as specified and as directed.in soil loose soil.

M & L 40 mm thick PCC 1:2:4 type B1(20 mm graded) as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.

M/L precast cement concrete block massonry with solid blocks exc 10 cm in width and settings in CM 1:6 type C1 1:3:6 (20mm graded aggregate) complete all as specified.

M&L for Rendering 15mm thick on fair faces of concrete surface of wall in CM (1:4) finished even and smooth without using extra cement all as specified and directed

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 6mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

M & L 75mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

M&L for vitrified tiles darkshade (square /rectangular) polished area of each tiles not exc0.36 in floors laid over and incl. 20mm thk 1:6 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised door shutters , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , handles 2 nos in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.

M&L for preparation of new wall surface and applying two finishing coat of acrylic emulsion paint , anti fungal resistancr , dirt resistance exterior paint of required shade including primer coat on new surfaces complete all as specified and as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises) complete all as specified and directed.

Taking down shutters of any description exc.1.0 Sqm and n.exc 2.0 sqm each complete all as specified and as directed.

Taking down shutters of any description nexc.1.0 Sqm each complete all as specified and as directed.

M & L 100mm thick PCC 1:4:8 type D2 as in subfloors finished even and rough without using extra cement complete all as specified and as directed.

S&F powder coated(powder coating min 50 micron) anodised window and ventilator shutters side hung/sliding type without sash , aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips, rubber neoprene packing , anodised aluminium snap beading screws ,anodised aluminium fittings such as peg stays 150 mm long(1 no) hinges type B-21 100 mm long (2 no) suitable handle (1 no ) complete all as specified and as directed.

M&L for non-skid ceramic tiles (square /rectangular) 7 to 8 mm thick area of each tiles 0.18 sqm but not exc0.38 sqm in floors laid over and incl. 15mm thk 1:4 screed bed jointed pointed with coloured cement to match the tiles complete all as specified and as directed.

M&L for non skid ceremic white tiles 7 to 8mm thk area of each tile exc 0.06 sqm but n exc 0.11 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to mortar.Laid over and including15 mm thick cement screed bed in CM 1:6 complete all as specified and as directed.

M & L Glazed ceramic Coloured Tile 300x450x7mm/300x600x7 mm thick in Skirting, Dados, etc., Set and Jointed in Neat Cement Slurry and Pointed in White or Colour Cement to match laid over a backing coat of 10mm thick CM 1:4 screed, complete all as specified and as directed.

M&L for 20mm thk granite slab ( as in table top rubbed and polished) as in counter basin fixed in CM 1:4 , pointing in white cement 1:2 using granite dust with admixture of pigment to match complete including dismantling the existing slab complete all as specified and as directed.

M&L for rendering 15mm thick on fair faces of brick work in CM 1:6 finished even and smooth without using extra cement complete all as specified and as directed.

S&F Gl frame work for snapgrid false ceiling comprising of Gl perimeter channnel 0.55 mm thick with Main T- flange of 25 mm and web of 30 mm fixed to surrounding wall angle with flange and web 25 mm each , Cross T with flange 25 mm and web 25 mm fixed to main T, Main T is suspended from soffit @ 1200 mmm c/c using GI wire of 2mm thickness GI frame will be 60 x 60 cm to recieve E-board ceiling complete all as specified and as directed .

M&L 4mm thick E Board 600x600 mm prepainted fibre boards ceiling designer/decorative type with different designs as approved by the Engr-in-charge fixed or laid in ceiling timber /GI/ aluminium frame work in ceiling flat or sloping complete all as per manufacturer instruction.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement supplying and fixing in the fram at site as per specification and drawing

M&L 2nd class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid ,rounded or chamfered ,put together with glue pinned at joints , supplied and fixed complete all as specified and as directed.

S&F 30 mm thk Flush door shutters solid core construction with block board core and ply wood face pannels commercial veneered on both faces complete all as specified and as directed.

M&L applying two coat of synthetic enamel paint over 10 cm width or girth over a coat of pink primer on new wood surface complete all as specified and as directed.

S&F aluminium anodised 150 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F aluminium anodised 100 mm long barrel tower bolts with cast or sheet barrel and rolled or cast bolts and fixed complete all as specified and as directed.

S&F aluminium cast type handles fabricated type of size 150 mm complete all as specified and as directed.

S&F aluminium cast type handles fabricated type of size 100 mm complete all as specified and as directed.

S & F in repairs Vitreous China EWC with P or S Trap including seat cover closed pattern with flat bottom and cover and MS CP hinging device, PVC flush bend pipe incl PVC Flushing Cistern 10 LITRE capacity, Low Level Valve Less, Symphonic Action type, White, with Inlet, Ball Valve, Float and Handle including 32mm dia PVC Flush Pipe, a Pair of Cast Iron Brackets duly Painted/ Erecting Stand including Cutting and Pinning in Ends, Making Good Disturbed Surfaces in Cement Mortar 1:3 including taking down unserviceable Flushing Cistern and connected Items of any description, complete all as specified and as directed.

S&F in repairs vitreous China clay wash hand basin of size 550x400mm oval shape table top complete all as specified and as directed

S&F in repairs Soap dish holder complete all as specified and as directed.

S&F Towel ring Towel Ring of PTMT fixed with and including chromium plated brass screws and wooden//plastic cleats (Minimum wt 90 gms)

S&F 15 mm bore CP health Foucet cock with Flexible pipe 1.25 m long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed.

S&F in repairs Toilet roll holder with stainless steel complete all as specified and as directed

S&F in repairs 15 mm Brass CP angular stop cock fancy type with Capstan heads fixed complete all as specified and as directed.

S&F Bib taps cast copper alloy with crutch or butterfly handle , screwed down for iron pipe fancy type chromium plated complete all as specified and as directed.

S&F in repairs Brass chromium plated bottle traps 32 mm dia for wash basins with inlet and outlet screwed for pipe or connections incl necessary packing uniun and cap complete all as specified and as directed.

M&L for 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

M&L for 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints ,laid in trenches or in floors complete all as specified and as directed.

S&F PVC(SWR) 75mm dia vent cowls complete all as specified and as directed.

S&F Stack clamps out of 75mm by 5mm flat iron and 16mm dia round iron stays ,incl bolts and nuts and securing ends of stays to wall or roof.

M&L for complete removal of existing treatment of wall and applying two coats of Oil bound distemper, over 1 mm thick wall care putty including necessary preparation of wall surfaces complete all as specified and as directed.

AGE E/M SCHEDULE PART -II Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, PVC conduit not less than 20 mm dia with accessories, concealed on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLSH, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable modular or pressed steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light/fan point controlled by one switch.

Description all as per Srl item No 138 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No. 138 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 138 above but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified.

Supply and fixing modular switch 1 way 6 A with cover plate and frame 230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor, Vinay

Supply and fixing modular bell push 1 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular switch 2 way 6 A module 230/250 volt , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fixing modular switch 1 way 16 A with cover plate and frame230/250 volt , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. Make : Cona , Plaza, Anchor .

Supply and fixing modular sockets with cover plate and frame 6A 2/3 pin combined 2 module 230/250 Volts, 50 Hz , AC supply, ISI Marked, with cover plate complete all as specified and directed.

Supply and fixing modular sockets 6A/16A 2/3 pin combined 2 module with cover plate and frame 230/250 Volts, 50 Hz , AC supply, ISI Marked, with white cover plate with frame complete all as specified and directed. ake : Cona , Plaza, Anchor, Vinay

Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one .

Supply and fixing round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F LED Luminaries 600mm x 600mm 36 watt, 220 V, AC recessed type with hifg efficiency PMMA diffuser soft galre free light complete with driver, holders and LED lamps suitable for roof ceiling including connecting up with 3 core flexible wire complete all as directed and specified.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specified and as directed.. Make : Cona , Plaza, Anchor .

S & F Exhaust fan 230 volts , 250mm,plastic body including making all electric connection complete all as specified and as directed including cutting of hole on wall and makng good disturbed surface of wall and outer wooden box for fan fix on wall complete all as specified and as directed.

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Supply and fix MCB DP, 240 Volts, 40 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's.complete all as specified and directed

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia concealed on wall/ceiling in PVC conduit, medium grade ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall along with one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion including taking down old wiring etc complete all as directed. Note: (i) Two runs of 4 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM. (ii) Cutting of chases in the wall of appropriate size shall be carried out with electric cutter machine . (iii) Necessary plastering in the disturbed surface of wall and distempering /white washing to match the existing colour shall be included in the unit rate quoted.

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete all as shown in Electrical Plate No 3 of SSR part -I.

S & F for water heater storage type (Geyser) vertical type of capacity 25 ltrs, 5 Star rated tank, electrically operated, AC 230 Volts, including 04 Nos of hold fastner nuts of suitable size,plug top etc including fixing complete all as specified and directed.

M & L for Point wiring with 4 Sq mm copper conductor single core flame retardant PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC caping and casing surface type and accessories of suitable size ISI marked and MS pressed steel terminal boxes of 1.6 mm thick of suitable size duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement incl provision of 3 mm thick bakelite hylem sheet for mounting the switches / sockets/ regulators etc including running up of 4 Sq mm copper conductor flame retardant PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified.

S & F Switch socket combination 2 in 1 multipurpose 3/5 pin 15 amps flush type complete all as specified and as directed.

Supply and lay GI tubing medium grade ISI marked in floor/ on wall with and including all fittings such as bends, tees,sockets,reducers,elbows, unions, etc of size 15 mm dia complete all as specified and as directed.

M & L for PVC connection pipe (copper) chromium plated 15 mm dia both end threaded incl brass coupling bolt cone washer complete , length of pipe is not less than 600 mm suitable for Hot/ cold water system complete as all specified and directed.

S & F Bib cock 15 mm dia cast copper alloy with butter fly handle, screwed down, screwed one ends for pipe of 15 mm dia complete all as specified and directed.

S & F Stop valves, cast cooper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed but fancy type chromium plated off size 15 mm dia complete all as specified and directed.

Material and labour for point wiring with single core PVC insulated unsheathed cable of size 1.5 Sqmm nominal area with multi-stranded FRLSH copper conductor, 1100 Volt grade drawn through and including PVC non metallic surface casing capping of suitable size with all fitting and accessories including PVC modular board of suitable size for housing/mounting the modular switches/ sockets, etc top covered with plastic laminated sheet 3mm thick including 1.5 Sqmm PVC insulated unsheathed single core FRLSH copper conductor earth continuity wire connected to common earth dolly complete for one light/fan point controlled by one way switch including making good disturbed surfaces complete all as specified and directed.

All as per Item No. 167 above but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 2.5 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 2.5 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed.

Description all as per Srl item No.168 above but with 2.5 Sqmm cable for socket outlet point 5 Amp on Independent board complete all as specified and as directed.

Supply and fixing switch 1 way 6 A module 230/250 volt , AC supply, ISI Marked, complete all as specified and directed.

Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed.

Supply and fixing LED security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection including bracket, clamps etc complete all as specified and directed

Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length) complete all as specified and as directed.

Taking down carefully copper/aluminum point wiring light/fan/sockets out let/power point complete (fittings such as switches, sockets, ceiling rose, pendent holders, light fittings etc. are to be measured separately) and/or drawing out from existing conduit/batten and making good disturbed surface of walls/floors/ceiling, complete all as specified and as directed.

Supply and fixing LED batten fittings 1x 20 Watt complete including LED light driver, holder, LED lamp and connection up to ceiling rose with three core wire fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type wall mounted, warrenty of tank 7 years, warrenty of heating element 4 years complete product warrenty 2 year includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation all as specified and directed

S&F heat resistant PVC connection pipe for hot and cold water 450mm long 15mm dia all as specified and directed.

Supply & laying galvanized steel tubing, medium grade laid in trenches/floor/wall and joined including necessary fittings such as bends, elbow, tees, sockets, etc for 15mm dia pipe all as specified and directed.

Supply and Fix of Angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Minimum weight 15mm-90gms) all as specified and directed

S & F single pole and neutral enclosure with a two pin and earth plug and socket with one single pole MCB complete all as specifided and as directed

Supply and fix in repair MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 100 Amps rated busbar with neutral link, 4 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection, including taking down complete all as specified and directed.

Material and labour for Point wiring with 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor drawn through and incuding medium grade, ISI marked, in PVC Casing capping on wall/ceiling and incuding provision of 1.50 Sqmm single core PVC insulated , unsheathed cable FRLS, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor and connected to common earth dolly with suitable size of lugs, including mild steel sunken box/metal flush box with suitable steel terminal boxes made out of 1.6 mm thick mild steel sheet metal conforming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly and coated with two coats of anti corrosive paint over a coat of red oxide primer both internally and externally including provision of new 3 mm thick plastic laminated sheet top cover for housing the switches , socket outlets, fan regulators etc. with brass screws and brass washers and making good the disturbed surfaces as per existing for one light point controlled by one switch. Note :- Switch, socket and fan regulators to be measured and paid for separately .

Description all as per Srl item No.182 above but for socket outlet point 5 Amp on same board.

Description all as per Srl item No.182 above but for socket outlet point 5 Amp on Independent board.

Description all as per serial item No 182 bove but with 4 sqmm cable for 3 pin 15 Amps switch socket outlet (Power point) complete all as specified and as directed.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps complete all as specified and as directed.

Supply and fix socket (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5/15 Amps, flush type, 240 volts complete all as specified and directed.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size including taking down old unserviceable one complete all as specified and as directed.

Supply and fixing of hot water Geysers of 25 ltrs capacity 5 star rated vertical type includng fixing of bolts , nuts grouted into the wall , and necessary cement work , making good of disturbed surface of wall , giving electric and water connection and testing after installation complete all as specified and as directed.

Supply and fix in repairs MCB, single pole 240 volts 6 to 32 Amps capacity fixed in DB's complete all as specified and as directed.

M & L Sub main wiring with two run single core 6 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 V including 20 mm dia Cassing capping ISI marked with all accessories such as Tees, elbows, junction boxes etc, as required fixed on wall alongwith one run of 6 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board and testing on completion inculding taking down old wiring etc complete all as specified and as directed. .Note: (i) Two runs of 6 sqmm and one run of 6 sqmm cable and one run of PVC conduit shall be measured as one RM.

M/S T N CONSTRUCTION