REPAIR AND MAINT OF LT PANELS MCCBS EARTHING CONNECTED CABLES WITH ALLIED WORKS AT OAF UNDER AGE EM OF GE 970 EWS

Amount

Excavation in trenches in soft / loose soil not exceeding 1.5 m in wide and not exc. 1.5m in depth for taking out / laying of under ground cable in trenches or cable ducts all complete all as specified.

Returning, filling in including spreading, levelling, watering and well ramming in layers, not exceeding 25 cm thick in soil after repairing / jointing and laying and testing of cables complete all as specified

Removing surplus soil to a distance not exceeding 50 m and deposited at a level not exceeding 1.5 m above from the starting point complete all as specified

M&L natural river sand as cushioning of cables including spreading and punning down all as per clause No 19.75 of SSR part -I all as specified. Note : punned thickness shall be measured for payment purpose

Supply and lay brick of conventional size 230x110x75mm locallly available as protection of cable in trenches complete all as specifed and as directed.

Taking down old unserviceable LT UG cable from any description (tranches, walls, ceilings.,etc) from various locations, including any length, supply and laying under ground LT cable XLPE insulated heavy duty armoured sheathed 1100 volts grade of cross sectional area 16 Sq mm, 4 core, with aluminium conductor with suitable size aluminium cable lugs and jointed in any description complete all as specified and directed. NOTE:- 1. Excavation , concrete cable protection bicks, pipe, PCC work for crossing/hard standing and sand for cushioning will be measured and paid separately. 2. Cost of aluminium cable lugs (eye lid/barrel/bottle neck type/ring type or any shape), gable gland, new nut bolt and washers of required size shall be deemed to be included in the unit rate quoted by the tenderer.

All as per item Sl No 06 above but of size 16 sqmm 2 core

All as per item Sl No 06 above but of size 25 sqmm 4 core

All as per item Sl No 06 above but of size 35 sqmm 3.5 core

All as per item Sl No 06 above but of size 50 sqmm 3.5 core

All as per item Sl No 06 above but of size 70 sqmm 3.5 core

All as per item Sl No 06 above but of size 95 sqmm 3.5 core

All as per item Sl No 06 above but of size 120 sqmm 3.5 core

All as per item Sl No 06 above but of size 150 sqmm 3.5 core

All as per item Sl No 06 above but of size 185 sqmm 3.5 core

All as per item Sl No 06 above but of size 10 sqmm 2 core

All as per item Sl No 06 above but of size 10 sqmm 4 core

S & F in repairs LT Control panel board, outdoor type,double door, padestal mounted, both side opening, overall size not less than 900 x 900 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 500 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over switch / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour with and including the following incoming and out going accessories all as approved and comprising as under : Location : Near GE 970 EWS JCO Mess -1

Incoming :-

a) MCCB 4 Pole, 315 Amp, 35 kA 415V - 01 No.

d) Copper wound with CTR 400/5 - 01 set.

e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

Outgoing :-

a) MCCB 3 Pole, 250 Amp, 35KA, 415V - 01 No.

b) MCCB 3 Pole, 100 Amp, 35 KA, 415V - 02 Nos.

c) MCCB 3 Pole, 63 Amp, 25 KA,415V - 01 No.

d) M & L for necessary grouting and fixing arrangements as reqd incl mounting nut, bolt and washers -01 Job

e) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.

S & F in repairs LT Control panel board, outdoor type,double door, padestal mounted, both side opening, overall size not less than 900 x 900 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 500 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over switch / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour with and including the following incoming and out going accessories all as approved and comprising as under : Location : Near GE 970 EWS JCO Mess-2

Incoming :-

a) MCCB 4 Pole, 250 Amp, 35 kA 415V - 01 No.

d) Copper wound with CTR 400/5 - 01 set.

e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

Outgoing :-

a) MCCB 3 Pole, 160 Amp,35KA, 415V - 01 No.

b) MCCB 3 Pole, 100 Amp, 35 KA ,415V - 01 No.

c) MCCB 3 Pole, 63 Amp, 415V,35 KA - 01 No.

d) 3 phase timer switch, 40 amp analog type, complete with relay and fixing arrangement etc -01 No

e) M & L for necessary grouting and fixing arrangements as reqd incl mounting nut, bolt and washers -01 Job

f) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.

S & F in repairs LT Control panel board, indoor type,double door, padestal mounted, both side opening, overall size not less than 1500 x 1200 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 2 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 500 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over switch /starter/ inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour with and including the following incoming and out going accessories all as approved and comprising as under : Location : At Doodh Ganga PH

Incoming :-

a) MCCB 4 Pole, 400 Amp, 35 kA 415V - 01 No

d) Copper wound with CTR 400/5 - 01 set.

e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

Outgoing :-

a) MCCB 4 Pole, 160 Amp, 35 kA 415V - 04 Nos.

b) MCCB 4 Pole, 63 Amp, 25 kA 415V - 02 Nos.

e) Indicator Lamps (LED type) showing R,Y, B phase - 04 set.

f) On load change over switch 4 Pole, 400 Amp, 415V - 01 No.

g) M & L for necessary fixing arrangements by drilling and provn of fdn bolts in the existing floor - 01 job

h) star delta starter for 60 HP pump set, complete with suitable size CTs, contactor, relayes, single phase preventer, on/off push botton red & green colour and othe accessories- 04 Nos

j) Angle iron base frame as reqd size as per above panel, total leg height as directed made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.

S & F in repairs LT Control panel board, outdoor type,double door, padestal mounted, both side opening, overall size not less than 900 x 900 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 400 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over switch / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and including the following incoming and out going accessories all as approved and comprising as under : Location : Near transformer 162 TA & Near transformer Sump pump House

Incoming :-

a) MCCB 4 Pole, 250 Amp, 35 kA 415V - 01 No.

e) Copper wound with CTR 250/5 - 01 set.

f) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

Outgoing :-

a) MCCB 3 Pole, 200 Amp, 415V,35KA - 01 Nos.

b) MCCB 3 Pole, 100 Amp, 415V ,35 KA- 02 Nos.

c) MCCB 3 Pole, 63 Amp, 415V,35 KA - 02 Nos.

d) 3 phase timer switch, 40 amp analog type, complete with relay and fixing arrangement etc -01 No

e) M & L for necessary fixing arrangements by drilling and provn of fdn bolts in the existing floor - 01 job

f) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.

S & F in repairs LT Control panel board, indoor type,double door, padestal mounted, both side openining overall size not less than 900 x 900 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 2 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 200 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over switch/ inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour and including the following incoming and out going accessories all as approved and comprising as under : Location : 14 WEU Pump House

Incoming :-

a) MCCB 4 Pole, 200 Amp, 35 kA 415V - 01 Nos.

d) Copper wound with CTR 250/5 - 01 set.

e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

Outgoing :-

a) MCCB 3 Pole, 63 Amp, 415V,35 KA- 04 Nos.

b) MCB 4 Pole, 32/40 Amp, 10 kA 415V - 03 Nos.

c) On load change over switch 4 Pole, 200 Amp, 415V - 01 No.

d) M & L for necessary fixing arrangements by drilling and provn of fdn bolts in the existing floor - 01 job

e) starter for 1.5 HP centrifugal pump set, complete with suitable size CTs, contactor, relayes, single phase preventer, on/off push botton red & green colour and othe accessories- 03 Nos

f) PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job

S & F in repairs LT Control panel board, outdoor type, padestal mounted/wall mounted as per site requirement, of suitable size size as per IS, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 3 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 200 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over switch / inter connections, common earth bus bar of at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour with and including the following incoming and out going accessories all as approved and comprising as under : Location : Near S/Complex

Incoming :-

a) MCCB 4 Pole, 100 Amp, 415V,35 KA - 01 No.

d) Copper wound with CTR 250/5 - 01 set.

e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

Outgoing :-

a)MCB DP/SPN, 20 Amp, 240V ,10KA- 10 Nos, 32 Amp, 240V ,10KA- 10 Nos.

b) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.

c) PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 job

S & F in repairs LT Control panel board, indoor type,double door, padestal mounted, both side opening, overall size not less than 1200 x 1500 x 450 mm, having independent compartment for bus bar, incoming feeder and each out going feeders, dust and vermin proof & lockable, factory made, fabricated out of 2 mm thick CRCA sheet suitable for 3 Phase 415 volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 500 Amp rating for 3 phase and neutral 4 wire system duly insulated with heat shrinkable type sleeves as per colour code, supported on epoxy insulators - 01 Set incl necessary copper cables of suitable size for MCCBs/MCBs / change over switch / inter connections, common earth bus bar of GI Strip 32 x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each out going and in coming cables in cable alley panel board and painted with powder coating in siemens grey colour with and including the following incoming and out going accessories all as approved and comprising as under : Location : Offrs S/Stn

Incoming :-

a) MCCB 4 Pole, 400 Amp, 35 kA 415V - 01 No.

d) Copper wound with CTR 250/5 - 01 set.

e) Indicator Lamps (LED type) showing R,Y, B phase - 01 set.

Outgoing :-

a) MCCB 3 Pole, 250 Amp, 35 kA 415V - 02 Nos.

b) MCCB 3 Pole, 160 Amp, 25 kA 415V - 02 Nos.

c) MCCB 3 Pole, 100 Amp, 25 kA 415V - 01 Nos.

d) MCCB 3 Pole, 63 Amp, 25 kA 415V - 01 Nos.

e) MCB 4 Pole, 40 Amp 415V ,10KA- 02 Nos.

f) 3 phase timer switch, 40 amp analog type, complete with relay and fixing arrangement etc -02 Nos

g) Angle iron base frame as reqd size as per above panel, total leg height 600 mm and grouting in side PCC 150 mm legs and made out of ISA 5050, 50 x 50 x 6 mm thick angle iron duly painted - 01 No.

h) PCC 1:3:6 (40 mm graded aggregate) Type C2 for foundation of angle iron legs frame work complete - 01 Job

Note for item No 18 to 101 : - (a) Rate for Interconnecting copper control cable along with necessary copper lugs shall be deemed to be included in the unit rate quoted . (b) The contractor should obtain necessary approval / layout /general arrangement for panel form Engg in Charge prior to commencement of work. the cost of the same shall be deemed to be included in the unit rate quoted . (c) Cost for connecting of existing old UG cable of any size / type to new incoming / out going terminals by cutting the required length, addn/altrn and provision of necessary cable lugs, cable glands, nut, bolt and washers etc shall be deemed to be included in the unit rate quoted .

S & F in repairs APFC Relays with auto set function having 6 + 1 steps 7 stage suitable for 415 Volts incl necessary connections all as directed.

S & F in repairs APFC Relays with auto set function having 4 + 1 steps 5 stage suitable for 415 Volts incl necessary connections all as directed.

S & F in repairs APFC Relays with auto set function having 3 steps 3 stage suitable for 415 Volts incl necessary connections all as directed.

S & F in repiars MPP type Box capacitor (Resin filled) three phase heavy duty type of capacity 20 to 50 KVAR rating suitable for 440 Voltage incl necessary connections all as specified.

S & F in repairs Copper wound with CTR 400/5 A rating all as directed.

S & F in repairs Copper wound with CTR 200/5A rating all as directed.

S & F in repairs Indicator Lamps (LED type) showing R,Y, B phase all as directed.

S & F in repairs MCB TPN 63Amps, 415 V as per all as specified.

S & F in repairs MCB TPN 32 amps 415 volts C series all as directed.

S & F in repairs MCB DP 32 Amps 240 volts C series all as direcetd.

S & F in repairs MCB SP 'C' series 10 Amps, 230V all as specified.

M & L for Earthing complete with galvanised steel earth plate, electrode,600x600x6.0 mm thick burried directly in ground (earth pit not less than 2.25m deep below normal ground level) connected to GI strip 32x 6 mm thick dia by mens of nuts, bolts, & washers of GI as shown in electrical plate No. 5 of SSR Part-I Connected to earthing ten point all as specified and including necessary earth pit PCC 1:3:6 chanber be 50mm thick PCC 1:2:4 chamber cover with 6mm dia mild steel reinforcement of 10 cm c/c spacing both ways in lieu of CI cover , watering arrangement shall be made with GI pipe light grade of 20mm dia including funnel and protection to earth lead shall be provided with GI pipe light grade 40 mm dia unto 7.5 from the earth plate electrode & refilling of soil etc including necessary excavation & earth work in any strata and PCC chamber including demolition of existing earth pit complete all as specified and directed.

S & F in repairs galvanised iron strip 32 x 6 mm buried in ground / fixed on walls / ceilings by using suitable size GI saddles etc complete all as specified and directed.

Supply and fix or laying in trenches / on wall / poles / structures in repairs GI tubing light grade ofor road crossing for cable protection of the following sizes complete all as specified and directed.

50 mm dia

40 mm dia

Supply and fix in repairs clamp made up of GI strip 25 x 3 mm thick to fix in the RCC/PCC pole for fixing of street light connection cable of required length / size from bottom to top of the LT pole incl necessary GI nut, bolt and washers complete all as specified and directed.

M & L for Painting of steel tubular pole 9.0 mtr long, by applying one coat of aluminium paint after scraping / brushing and cleaning the rust on pole and cross arms . Alluminium painting will be done on pole above 1.5 m height from ground level and balance 1.5 m from ground level will be painted by alternate layer of black and white enamelled paint ( 30 cms each), pole Nos will be written on pole by black paint in yellow circle of 150mm dia complete all as specified and directed.

Supply and fix in repairs of LED Floodlight luminaire 240 watts capacity with secondary optics made in pressure die cast housing and heat sik in aluminium extrusion and IP66 Protection fixed in the AOL bracket of High mast light fittings complete all as specified and directed. Make : Bajaj Cat No BARFEG 240W LED /Philips / CG/Havells/Surya.

Supply and fix in repairs of LED Floodlight luminaire 200 watts capacity with secondary optics made in pressure die cast housing and heat sik in aluminium extrusion and IP66 Protection fixed in the AOL bracket of High mast light fittings complete all as specified and directed. Make : Bajaj Cat No BARFEG 200W LED /Philips / CG/Havells/Surya.

S & F in repairs MCCB 4 Pole, current rating 400 Amp, adjustable over load and short circuit with Micro processor release setting , breaking capacity 36 kA at 415V, 50Hz, of incl necessary spreaders / cable lugs / nut, bolt and washers if required complete all as specified and direcetd.

Ditto all as per item No 140 here in before but 4 pole 250 A, having breaking capacity 36 kA

Ditto all as per item No 140 here in before but 4 pole 200 A, having breaking capacity 36 kA

Ditto all as per item No 140 here in before but 4 pole 160 A, having breaking capacity 36 kA

Ditto all as per item No 140 here in before but 4 pole 100 A, having breaking capacity 36 kA

Ditto all as per item No 140 here in before but 4 pole 63 A, having breaking capacity 36 kA

S & F in repairs MCCB 3 Pole, current rating 400 Amp, adjustable over load and short circuit with Micro processor release setting , breaking capacity 36 kA at 415V, 50Hz, of incl necessary spreaders / cable lugs / nut, bolt and washers if required complete all as specified and direcetd.

Ditto all as per item No 146 here in before but 3 pole 250 A, having breaking capacity 36 kA

Ditto all as per item No 146 here in before but 3 pole 200 A, having breaking capacity 36 kA

Ditto all as per item No 146 here in before but 3 pole 160 A, having breaking capacity 36 kA

Ditto all as per item No 146 here in before but 3 pole 100 A, having breaking capacity 36 kA

Ditto all as per item No 146 here in before but 3 pole 63 A, having breaking capacity 36 kA

S & F in repairs Four Pole on load manual operated changeover switch in open execution with steel sheet enclosure of current rating 250 Amps complete all as specified and direcetd.

Ditto all as per item No 152 here in before but of capacity 400 A

M/S MIR SAJAD ENTERPRISES

M/S Sultan Enterprises

ms saleem enterprises

M/S Ghulam Mohammad Shalla

M/S M.Y Enterprises

FG CONSTRUCTION