Upgradation / Modification in the chamber of Worthy Chief Electrol Officer in 2nd Floor of Nirvachan Bhawan and Partition at Ground Floor.

Amount

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixed with dash fastener of required dia. and size including necessary filling up of gaps at junctions i.e, at top, bottom and sides with required EPDM rubber / neoprene gasket felt etc. Aluminum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminum snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge (glazing, panelling and dash fasteners to be paid for separately.) 22.1.1.2 Powder coated aluminum (minimum thickness of powder coated 50 microns)

Providing and fixing 12mm thick prelaminated particle board flat pressed three layer or graded wood particle board (conforming to IS: 12823 Grade-I type-II) in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-incharge. Pre-laminated particle board with decorative lamination on both sides.

Providing and fixing glazing in aluminum door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineerin-charge.With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg / sqm

Supply & Fixing of Wooden plywood 19mm thick for panelling of wall with wooden Planking incl . Cost of nails , corners complete

Wooden Panelling using Wooden planking, tongued and grooved in flooring/Panelling including fixing with iron screws complete:

Taking out existing UPVC door shutter, refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge.

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade, one or more coats on old work

Supply & Fixing of Wooden Executive Table of approved design & make

Supply of Executive Chair of approved design & make

Add Provision for Electrical Works

Note:- i) Including cost of all leads, lifts; & Carriage of material by Mechanical transport Complete.

JASMEET SINGH