PROVN OF REPLACEMENT OF EXISTING OH 11 KV HT AND 433 KVA LT INTO UNDERGROUND CABLE NETWORK ALONGWITH ALLIED INFRA AT HAFT CHINAR GRN UNDER GE 970 EWS.

Amount

Supply, laying, testing and commissioning XLPE cable, PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 11000 Volts grade (earthed), of size 185 sqmm 3 core, laid in trenches/ floor/ duct/ fixed on poles through GI tubing, complete all as specified and as directed.

S&F in repairs cable jointing kit for 11KV grade cable for outdoor termination, heat shrink type joint, complete with jointing material and accessories, suitable for 3 core XLPE armoured aluminium conductor cable of size 120 to 185 sqmm, complete all as specified and as directed.

S&F mild steel cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending cold or hot, drilling holes for bolts, in any shape or size as indicated or directed and inclusive two coat of synthetic enamel paint over one coat of red oxide zinc chrome primer after prepration the surface, complete all as specified and as directed.

Supply, laying, testing and commissioning XLPE cable, PVC insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cable, heavy duty with aluminium conductor 1100 Volts grade (earthed), of size 6 Sqmm 4 core, laid in trenches/ floor/ duct/ fixed on poles through GI tubing, complete all as specified and as directed.

All as per ser item No 4.00 here-in-before, but of size 10 Sqmm 4 Core.

All as per ser item No 4.00 here-in-before, but of size 16 Sqmm 4 Core.

All as per ser item No 4.00 here-in-before, but of size 25 Sqmm 4 Core.

All as per ser item No 4.00 here-in-before, but of size 35 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 50 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 70 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 95 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 120 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 150 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 185 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 240 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 300 Sqmm 3.5 Core.

All as per ser item No 4.00 here-in-before, but of size 400 Sqmm 3.5 Core.

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 1200mm x 1000mm x 450mm, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 1000 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 1200mm x 1000mm x 450mm, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 1000 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed:-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 1200mm x 1000mm x 450mm, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with aluminium bus bar of 350 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 1200mm x 1000mm x 450mm, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with aluminium bus bar of 350 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 1200mm x 1000mm x 450mm, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with aluminium bus bar of 600 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 750mm x 600mm x 400mm or of suitable size to accommodate MCCBs, MCBs etc, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with aluminium bus bar of 350 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 750mm x 600mm x 400mm, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with aluminium bus bar of 300 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed:-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 1200mm x 1000mm x 450mm, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with aluminium bus bar of 400 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 750mm x 600mm x 400mm or of suitable size to accommodate MCCBs, MCBs etc, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with copper bus bar of 400 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 700mm x 600mm x 400mm or of suitable size to accommodate MCCBs, MCBs etc, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with Aluminium bus bar of 400 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

S&F in replacement LT Control panel board, outdoor type, double door, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 750mm x 600mm x 450mm or of suitable size to accommodate MCCBs, MCBs etc, CPRI approved, IP-52, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with Aluminium bus bar of 200 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

Dismantling and taking down the existing LT/HT insulators of any type from any description from existing position with all accessories and depositing to E/M store yard or where, complete all as specified and as directed.

Dismantling cross-arms of MS channel or angle sections etc of any description and type and depositing to E/M store yard for or any other place where directed for further disposal, complete all as specified and as directed.

Dismantling stay assembly, complete all as specified and as directed. Note : Demolition of concrete, etc. and excavation measured separately.

S&F LT busbar panel board with 4 pole 40 Amp, incommer MCCB, breaking capacity 16 KA, outdoor type, door cubical type, pedastal mounted, slopy roof, front and back both side opening, overall size not less than 600mm x 450mm x 250mm, CPRI approved, IP-48, having independent compartment for bus bar, incoming feeder and each outgoing feeders, dust and vermin proof & lockable, factory made, fabricated out of 3.15 mm thick CRCA sheet, suitable for 3 Phase 415 Volts 50 Hz, AC supply, bus bar chamber with Aluminium bus bar of 150 Amps rating for 3 Phase and neutral 4 wire system duly insulated with heat shrinkable type sleeveless as per colour code, supported on epoxy insulators - 01 set including necessary copper cables of suitable size for MCCBs/MCBs/change over switch/inter connections, common earth bus bar of GI strip of size 32mm x 6 mm at bottom with panel board at two earth terminals, cable glands with independent plates at bottom for each outgoing and incoming cables in cable alloy panel board and painted with powder coating in siemens grey colour and provision for the following incoming and outgoing accessories, all as approved and comprising as under, complete all as specified and directed :-

M&L for earthing complete with galvanised steel earth plate electrode of size 600mmx600mmx6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) connected to GI strip of size 25mm x 4mm by means of nuts and bolts, check nuts and washers of GI and connected to earthing test point and earth dolly all as shown in electrical plate No 3 of MES SSR part I, testing on completion including necessary excavation and earth work in hard/dense soil, PCC(1:3:6) chamber, 50mm thick PCC 1:2:4 chamber cover with 8mm dia mild steel TMT reinforcement of 10cm c/c spacing both ways, watering arrangement shall be made with GI pipe light grade of 20mm bore incuding funnel and wire mesh and protection to earth lead shall be provided with GI pipe light grade grade, 40mm bore upto 7.5 from the earth plate, electrode & refilling of soil and removal of surplus soil to a distance not exc 50 mtr, complete all as specified and as directed.

All as per ser item No 33.00 here-in-before but using galvanised iron strip 32 x 6mm as earthing lead.

S&F in repair street light bracket made out of GI tubing 32/40mm dia, light grade of approx length 1.2 mtr long bend to shape suitable for security light fittings with necessary MS clamps-02 Nos with one coat of anti corrosive primer and two coats of aluminium paint including nuts, bolts, washers etc, complete all as specified and as directed.

S&F in repair thermoplastic cable junction box/distribution board IP-65 with knockouts for cable entry of size 10 to 25 Sqmm x 4 core including fastering clamp with LT pole, box size 333 x 233 x 120mm hinged cover with locking arrangements including with terminals TPN strip, with 01 No MCB SP 6A, complete all as speficied and as directed. Make :Hensel or equivalent of sintex.

M&L for sub main wiring FR insulated unsheathed, multistrand copper conducor PVC cable 2 runs of size 2.5 Sqmm for phase and neutral and 1.5 Sqmm for earthing, drawn through rigid PVC conduit pipe/ casing caping of suitable size fixed on wall/ ground/ ceiling etc, complete all as specified and as directed. Note :- Colour code shall be followed as per IS specification.

Excavation in trenches in hard/dense soil, not exc 1.5 mtr wide and not exc 1.5 mtr in depth for laying of cables/errection of pole etc, complete all as specified and as directed.

Returning, filling in trenches including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and directed.

Removing excavated soil to a distance not exc 1.5 mtr above the starting point and deposting where directed at a level, complete all as specified and as directed.

M&L for dry river sand, laid in trenches for cable protection, as 8cm thick below the cable and 15cm thick above the cable, complete all as specified and as directed in para-19.75 of SSR 2009 Part-I. Note :- Punned thickness of sand shall be measured & paid.

Supply and laying brick of conventional size 230 x110 x 75mm locally available as protection of cable in trenches, complete all as specified and as directed.

M&L for straight through joint (LT), heat shrink type for under ground PVC insulated and PVC sheathed armoured heavy duty XLPE cables with aluminium conductor including jointing kit, including making joints for the cable of size 6 to 16 sqmm 4 core cable including testing and commissioning, complete all as specified and as directed.

All as per ser item No 43.00 here-in-before, but of size 25 to 50 Sqmm x 3.5/4 core.

All as per ser item No 43.00 here-in-before, but of size 70 to 120 Sqmm x 3.5 core.

All as per ser item No 43.00 here-in-before, but of size 150 to 185 Sqmm x 3.5 core.

All as per ser item No 43.00 here-in-before, but of size 240 to 300 Sqmm x 3.5 core.

M&L for LT indoor/outdoor end joint, heat shrink type for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 20 to 50 sqmm 4/3.5 core cable including testing and commissioning, complete all as specified and as directed.

M&L for LT indoor/outdoor end joint, heat shrink type for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 70 to 120 sqmm 3.5 core cable including testing and commissioning, complete all as specified and as directed.

M&L for LT indoor/outdoor end joint, heat shrink type for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 150 to 185 sqmm 3.5 core cable including testing and commissioning, complete all as specified and as directed.

M&L for LT indoor/outdoor end joint, heat shrink type for under ground PVC insulated and PVC sheathed armoured heavy duty cables with aluminium conductor including jointing kit, including making joints for the cable of size 240 to 300 sqmm 3.5 core cable including testing and commissioning, complete all as specified and as directed.

M/S Sky Engineers

CHINAR CONSTRUCTION TRADERS

ALCO ENGINEERSPVT LTD