REPAIR TO JOINERY FLOORING WALL REPAIRS PLASTERING OF OFFICERS MD AND OTM ACCN AT AF STATION DEOLALI

Amount

Taking down chowkats with shutter (without taking off shutter from the frame) not exc 1.5 Sqm each.

All as item 1 herein before but exc 1.5 sqm but not 4 Sqm each

Taking down shutter of any description n.exc 1 sqm each.

All as per item No 3 here in before but exc 1 sqm and n.exc 2 sqm each.

Refixing shutters of any description in the same opening incl taking down and resecuring or easing and adjusting all as specififed not exc 1 sqm each

All as item 5 herein before but exc 1 sqm but not exc 2 sqm each

Cutting holes in stone walls built in cement mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 exceeding one brick wall and not exceeding two brick wall.

S & F 30 mm thick factory made second class hard wood glazed and skeleton shutters in windows, ventilators etc, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (b):

M & L 35 mm thick factory made second class hard wood plain framed factory made panalled shutters( two panels) with 12 mm thick veneered particle board with commercial face veneers on both side as panel inserts, styles & rails shall be of second class hard wood timber generally conforming to IS-1003(Part-I) (Door shutters) Kiln seasoned and chemically pressure treated.

S & F 35 mm thick second class hard wood factory made glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., divided in to squares with plain, chamfered or rounded mitred and rebated sash bars any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc; sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a).

S & F 40 mm thick Flush shutters, solid core construction, with particle board core and if both faces are covered with decorative face veneer with lipping/frame to match

S & F factory made solid panel PVC door frame of size 50mmx47mm out of 5mm wood grain printed PVC sheet & edges will be printed to match with printed sheet reinforced with M.S. square tube, all as per specification and drawing.

S & F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strips of 20 mm width stuck inside with solvent cement for stiles and single sides prelam PVC sheet and stile & rails having one side feathered edge and on other side 10mm (90°) bent edges & as gap insert for top rail & bottom rail; Panelling to be fitted in the M.S. frame welded/ sealed to the styles & rail with suitable PVC sheet beading, and joint together with solvent cement, all as specification and drawing.

S&F steel windows with side hung shutters including box type hinge of size 50 mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete with glazing bars, dovetailed or welded all as specified.

S&F steel windows with side hung shutter including box type hinges of size 50 mm with 'z' type steel handle and steel peg stay and 02 No.100 mm size MS tower bolts welded on each shutter complete without glazing bars, dovetailed or welded

S&F steel ventilators with top hung shutter including hinges, steel pegstay, tower bolt etc completed as specified

S & F steel windows or ventilators fixed type, with glazing bars.

S&F window guard bars welded in window/fixed independently in wooden frame conforming toFe-290 Gde E-165

M&L for holes round drilled or cut in hard wood dia of side nexc 15 mm

Hacking out old broken glass panes (any thickness size quality or description ) from wooden frame fixed with oil putty or beads area not exc 0.5 Sqm each all as directed

All as item 20 herein before but from metal frame incl punching or drilling out old glazing pins/spring clips and proividng new ones all as directed

S & F 3mm thick sheet glass ordinary quality and glazing with oil putty not exe 0.5 sqm in each pane.

M&L 2nd class HW plain solid straight chowkhats and frames worught framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete

M&L Preparing surfaces of wood and wood based materials, steel and iron work, new or old, of any description and girth, like ends of posts, backs of chawkats, and treated with tar or coal tar black paint

S&F 100 mm long Butt hinges, extruded aluminium ally with galvanished mild steel hinge pin anodised and fixed type B-21

S&F mild steel butt hinges medium weight cold rolled 100 mm size

All as item 26 herein before but 75 mm size

S & F 100 mm size aluminium anodised barrel tower bolt of extruded section .

S & F 200 mm size aluminium anodised barrel tower bolt of extruded section .

S & F in repairs 200 mm long Aluminium, anodised, barrel tower bolts of extruded section.

S&F 300 mm Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) & fixing clip of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed.

S & F in repairs 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.

S & F 100 mmm long extruded aluminium ally handles, fabricated type., anodised

S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F in repairs 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.

S & F aluminium plate type II Gate and shutter, hook & eye 125 mm size.

S & F in repair ordinary rat tails150 mm size pattern door springs including roller and roller plate complete.

S&F in repair 75 mm length floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor

S&F in repair ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed

S&F mild steel flat as in hold fast , wall ties angle cleat for security purline to wood trusses conforming to Fe 410 - 0 or Fe - 310 - 0

S & F stainless steel wire cloth, 0.36 mm dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples including necessary wooden bedding.

All as item 41 herein before but in repair for aluminium/steel/wooden window/door including for fixing necessary wooden bedding/iron staples/aluminium bedding

M&L two coats of synthetic enamel painting to wood and wood based material surfaces exc 10cm width or girth over a one coat of pink primer incl preparation.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete.

M & L rendering 15 mm thick plaster in cement mortar 1:6 on stone masonry surfaces or other than of fair faces of brick or concrete surfaces, finished even and smooth with 1 mm thick layer of sagol finish complete.

M & L for prepariation of New plastered surfaces and applying two coats of distemper oil emulsion over a coat of chalk whiting for preparatory to distempering on surfaces of walls.

M&L in repair for 18/19 mm thick prelaminated particle board, interior grade prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work in cup board shutters, partitions, shelves, cupboard drawers, pelmet boxes and similar work including taking down olds shutters/shelves.

M&L for external teak wood lipping, 6mm thick fixed with nails for particle board of 18/19 mm thick

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sq. Cm in section.

S & F second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with nails, cross sectional area exc 6 Sq cm and nexc 13 Sq. cm.

S & F in repair hasp and staple of size 125 mm, safety type, aluminium anodised with mild steel hinge pin including bolt to hing plate and fixed with screws.

M&L for taking down and refixing aluminium door/window shutter nexc 2.4 sqm each in the same opening after repair/replacement/changing defected/unservicable of powder coating anodised aluminium section and mild steel work, handle, locking device for door including necessary joining cleats glazing clips, rubber neaprene packing, anodised aluminium snap beading screws etc fixed in repair. Note :- (i) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing etc, in built handles for sliding windows & fitting of old glass. However, no element on account of weight will be taken into consideration for these item. (ii) Section of aluminium for repair/replacement shall be provided as per existing paid separatly and mild steel work, handle, locking device for door, wire mess will be paid separatly.

S&F powder coating anodised aluminium section for shutter/frame for door, window and ventilator complete all as specified.

S & F powder coated sections for doors and windows including frames of size as approved and fixed all as specified and directed (Note : (i) Paneling such as glass , Gauge etc will be measured and paid saperately.(ii) The rate quoted under this item deemed included for necessary jointing cleates, glazing clips, alluminium beading, screws, rubber packing and locking devices & in built handles for sliding windows. However, no element on account of weight will be taken into consideration for these item.(iii) Floor door spring/locks/tower bolts/ handles/ door closure/hinges for doors measured saparately.(iv) Size of door / windows shall be all as directed at site.(v) Grills will be measured saparately.(vi) Second class hard wood batten of appropriate size to be inserted inside the frame for fixing hinges and the same is included in the rate quoted.)

S & F plain sheet glass 5 mm thick tinted, fixed to aluminium doors/ windows / ventilators complete all as directed by Engr-in-Charge (Note:- Beading/rubber packing is included in the rates for aluminium sections above.)

S&F in repair double action floor door stoper/spring hydroulically regulated made up of minium 1.25 mm thick aluminium alloy sheet foundation bore, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty as in fixed including taking down and refixing aluminium shutter in the same opening.

S & F in repairs aluminium (diecast) body door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters of 700 mm in width & weight not more than 35 Kg.

S&F in repair Mortice lock brass 100 mm 4 lever vertical type fixed.

Dismantling Structural steel work including doors, gates but excluding framed truss etc.

S & F rolled mild steel framed work as in doors or gates of angle or other section confirming to Fe 410 - W, with gusset plates, rails braces, etc., complete, drilled for fixing of steel sheeting or other covering and hanging and fixing complete.

S & F 1.25mm thick mild steel, plain, black sheet in wall cladding, steel gates, etc., cut to size, holes punched including rounded headed screws, clout nails or revets and fixed to wood or steel framing or fixing to MS clamps with necessary bolts and nuts with plain 40mm lap joints welded to frame as directed.

S & F in repair 1.25 mm thick mild steel, plain, black sheet in wall cladding, steel gates, etc., cut to size, holes punched including rounded headed screws, clout nails or revets and fixed to wood or steel framing or fixing to MS clamps with necessary bolts and nuts with plain 40mm lap joints withr welded to frame as directed.

M & L for prepariation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer.

S&F mild steel butt hinges heavy weight cold rolled 125mm size

S&F mild steel sliding door bolt plate type black jappaned with bright bolt not less than 12 mm dia with and including 6 bolts and nuts four o bolt plate and two on staple 250 mm long

S & F 200 mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt.

S & F steel rolling shutters of 1.00 mm thickness laths without ball bearing as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated complete push & pull or manual type.

Taking down and refixing of steel rolling shutters (Approx size 2.6 x 2.6 Mtr) after repair/allinement of shutter, repair/greasing of ball bearing, greasing of all shutter where required etc complete all as specified and as directed by Engr in Charge

M&L Preparation of newly untreated surfaces of any description, over 10 cm in width or girth, not otherwise described and applying two coats of aluminium paint over a coat of aluminium oxide primer complete all as specified and directed by Engr-in-Charge.

M&L Preparation of old painted surfaces of any description, over 10 cm in width or girth, not otherwise described and applying one coats of aluminium paint complete all as specified and directed by Engr-in-Charge.

Dismantling ceiling boarding of any description fixed in any position with nails incl cover fillets/aluminium snap grid.

M & L for false ceiling work of aluminium snap grid system size 605x605mm for false ceiling with aluminium angles of size 23.5 mmx23.5,,x1.5mm fixed to wall with GI screws and aluminium tee of size 37.5x37.5x1.5mm in main and cross runners fixed 60 cm c/c including 3 mm dia hanging GI wire(upto necessary required length & 1.2 Mtr c/c) fixed to slopping roof (rafter/purlin/trusses) complete all as specified.and tied to existing roof/truss/rafters complete

M & L Non asbestos fibre cement building boards 4 mm thick (one side embosed design), fixed or laid/ inserted to Aluminium grid frame work in ceiling with clips all as specified and directed.

Fixing only in repairs Asbestos Cement Plain building boards/Non asbestos fibre cement building boards any thickness, fixed to timber/ Aluminium frame work with screws in ceilings.

M & L for prepariation of newly cement building boards surfaces of ceilings and applying two coats of white wash.

S&F in repairs Non asbestos fibre cement building boards 4mm thickness (one side embosed design), fixed to timber/ Aluminium frame work with screws in ceilings.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, walls etc.

M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6.

M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces of walls in cement mortar 1:4 finished even and fair.

M & L for prepariation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali resitant primer on surfaces of walls.

Dismantling of modular kitchen shutters/cabinets with frame all as directed.

S & F Modular shutters of MDF factory made finished boards 20mm thick with self closing hinges, powder coated handles,magnetic lock system etc for SS baskets fitted below the cooking platform complete all as specified.

Dismantling of modular kitchen stainless steel basket framing including all accessories all as directed

S & F Modular kitchen sliding type Stainless Steel Baskets with framing along with rail, overall depth of framing not less than 50 cm and exc 75cm including all necessary fitting and fixtures all as specified and directed by Engr-in-charge.

S & F Modular Kitchen cabinet along with shutters and shelves having depth not less than 30 cm with necessary partitions inside the cabinet with MDF factory made finished boards 20mm thick with self closing hinges, powder coated handles,magnatic lock system etc complete all as specified.

Demolition of cement concrete (unreinforced) in ground floors (below or above ground level) not exceeding 15cm thickness all as directed by Engr-in-Charge.

M & L 75mm thick PCC 1:3:6 mix type C2 as in plinth protection and surface to be finished fair without using extra cement .

M & L for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) all as specified.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in near cement slurry in floors with grey cement and pigment over 15 mm thick screed bed in CM 1:6

M & L for Cement concrete 1: 2:4 type B-1 (20 mm graded stone aggregate) as in edges for Coping.

Vinod Enterprises

M/s Nilesh Enterprises

shubham Enterprises

M/S KANNANS

MAHIMA CONSTRUCTION