SPECIAL REPAIRS REPLACEMENT OF BER PUMP SETS UNDER AGE EM NO II OF GE U SECUNDERABAD

Amount

Supply,install,testing and commissioning of 10hp,3-ph,415volts,50hz, submersible pumpset comprising of submersible motor, pump minimum 8 no. of stages with minimum head in meters is 95-38 meters and minimum discharge capacity 12-36 cubic meter per hour (m3/hr),minimum rpm 2880,outlet size 65mm dia,cast iron- casing,stainless steel - impller, stainless steel -motor shaft,stainless steel- pump shaft, stainless steel - motor housing,diffuser-cast iron,finished rotor -copper,NRV-cast iron, suction-cast iron,thrusht bearing -carbon +stainless steel,Insulation-B class,type of cooling- water filled,IP 68-protection suitable for borewell size 150mm/200mm/250 dia,inclduing taking out old un serviceable pump set from exisiting borewell by removing/lifting of GI column pipe from borewell and disconnect the all electrical/mechanincal connections from the pump and lowering the new pump set,GI column pipes, including making of electrical/mechanical connection to new pump set includng replacement of wornout GI sockets/couplings(not exceeding 06nos),cutting/rethreading the exisiting damaged pipe complete all as directed by engr-in-charge.

Supply,install,testing and commissioning of 7.5hp,3-ph,415volts,50hz, submersible pumpset comprising of submersible motor, pump minimum 6 no. of stages with minimum head in meters is 71-28 meters and minimum discharge capacity 12-36 cubic meter per hour (m3/hr),minimum rpm 2880,outlet size 65mm dia ,cast iron- casing,stainless steel - impller, stainless steel -motor shaft,stainless steel- pump shaft, stainless steel - motor housing,diffuser-cast iron,finished rotor -copper,NRV-cast iron, suction-cast iron,thrusht bearing -carbon +stainless steel,Insulation-B class,type of cooling- water filled,IP 68-protection suitable for borewell size 150mm/200mm/250 dia,inclduing taking out old un serviceable pump set from exisiting borewell by removing/lifting of GI column pipe from borewell and disconnect the all electrical/mechanincal connections from the pump and lowering the new pump set,GI column pipes, including making of electrical/mechanical connection to new pump set includng replacement of wornout GI sockets/couplings(not exceeding 06nos),cutting/rethreading the exisiting damaged pipe complete all as directed by engr-in-charge.

Supply,install,testing and commissioning of 6hp,3-ph,415volts,50hz, submersible pumpset comprising of submersible motor, pump minimum 6 no. of stages with minimum head in meters is 70-31 meters and minimum discharge capacity 6-27 cubic meter per hour (m3/hr),minimum rpm 2880,outlet size 50mm dia ,cast iron- casing,stainless steel - impller, stainless steel -motor shaft,stainless steel- pump shaft, stainless steel - motor housing,diffuser-cast iron,finished rotor -copper,NRV-cast iron, suction-cast iron,thrusht bearing -carbon +stainless steel,Insulation-B class,type of cooling- water filled,IP 68-protection suitable for borewell size 150mm/200mm/250 dia,inclduing taking out old un serviceable pump set from exisiting borewell by removing/lifting of GI column pipe from borewell and disconnect the all electrical/mechanincal connections from the pump and lowering the new pump set,GI column pipes, including making of electrical/mechanical connection to new pump set includng replacement of wornout GI sockets/couplings(not exceeding 06nos),cutting/rethreading the exisiting damaged pipe complete all as directed by engr-in-charge.

Supply,install,testing and commissioning of 5hp,3-ph,415volts,50hz, submersible pumpset comprising of submersible motor, pump minimum 5 no. of stages with minimum head in meters is 59-23 meters and minimum discharge capacity 12-36 cubic meter per hour (m3/hr),minimum rpm 2880,outlet size 65mm dia ,cast iron- casing,stainless steel - impller, stainless steel -motor shaft,stainless steel- pump shaft, stainless steel - motor housing,diffuser-cast iron,finished rotor -copper,NRV-cast iron, suction-cast iron,thrusht bearing -carbon +stainless steel,Insulation-B class,type of cooling- water filled,IP 68-protection suitable for borewell size 150mm/200mm/250 dia,inclduing taking out old un serviceable pump set from exisiting borewell by removing/lifting of GI column pipe from borewell and disconnect the all electrical/mechanincal connections from the pump and lowering the new pump set,GI column pipes, including making of electrical/mechanical connection to new pump set includng replacement of wornout GI sockets/couplings(not exceeding 06nos),cutting/rethreading the exisiting damaged pipe complete all as directed by engr-in-charge.

Supply,install,testing and commissioning of 4hp,3-ph,415volts,50hz, submersible pumpset comprising of submersible motor, pump minimum 5 no. of stages with minimum head in meters is 55-14 meters and minimum discharge capacity 3.6-25.2 cubic meter per hour (m3/hr),minimum rpm 2880,outlet size 50mm dia ,cast iron- casing,stainless steel - impller, stainless steel -motor shaft,stainless steel- pump shaft, stainless steel - motor housing,diffuser-cast iron,finished rotor -copper,NRV-cast iron, suction-cast iron,thrusht bearing -carbon +stainless steel,Insulation-B class,type of cooling- water filled,IP 68-protection suitable for borewell size 150mm/200mm/250 dia,inclduing taking out old un serviceable pump set from exisiting borewell by removing/lifting of GI column pipe from borewell and disconnect the all electrical/mechanincal connections from the pump and lowering the new pump set,GI column pipes, including making of electrical/mechanical connection to new pump set includng replacement of wornout GI sockets/couplings(not exceeding 06nos),cutting/rethreading the exisiting damaged pipe complete all as directed by engr-in-charge.

Supply,install,testing and commissioning of 3hp,3-ph,415volts,50hz, submersible pumpset comprising of submersible motor, pump minimum 3 no. of stages with minimum head in meters is 33-8 meters and minimum discharge capacity 3.6-25.2 cubic meter per hour (m3/hr),minimum rpm 2880,outlet size 50mm dia cast iron- casing,stainless steel - impller, stainless steel -motor shaft,stainless steel- pump shaft, stainless steel - motor housing,diffuser-cast iron,finished rotor -copper,NRV-cast iron, suction-cast iron,thrusht bearing -carbon +stainless steel,Insulation-B class,type of cooling- water filled,IP 68-protection suitable for borewell size 150mm/200mm/250 dia,inclduing taking out old un serviceable pump set from exisiting borewell by removing/lifting of GI column pipe from borewell and disconnect the all electrical/mechanincal connections from the pump and lowering the new pump set,GI column pipes, including making of electrical/mechanical connection to new pump set includng replacement of wornout GI sockets/couplings(not exceeding 06nos),cutting/rethreading the exisiting damaged pipe complete all as directed by engr-in-charge. Note for Item No 01 to 06 Depth of the borewells between 200 feet to 450 feet (approx)

Supply,install,comprising & testing of horizontal mounted monoblock pumpset of capacity 10 Hp,3-ph,50Hz,415 volts comprising of motor & pump capacity 2900rpm (minimum),discharge capacity of 10-40 liters per second at 23.5 - 9.6 meters head(minimum) with inbuilt strainer,suction & delivery pipe size is 80mmx65mm with necessary base plate for Pump set using angle iron of suitable size for base and frame complete as required at site including foundation bolts of suitable dia and suitable length including necessary civil works & PCC works complete to withstand the vibrations and following features all as per manufacturer instructions and including disconnection &taking out old unserviceable pump setincluding dismantling of damaged PCC from its existing location complete all as specified and directed (a) Motor shall be energy efficent motor conforming to IS-12615 (b) Body & pre filter made of cast iron. (c)prefilter basket made of stainless steel grade 304 (d)Shaft made of Stainless steel. (e)Sealing arrangement - Gland packing. (f) Impeller made of Stainless steel. (g)casing made of cast iron. (h)IP-55, F-class insulation. (i)Motor body made of Cast iron

Supply,install,comprising & testing of horizontal monoblock pumpset of capacity 7.5 Hp, 3-ph,50Hz,415 volts comprising of motor & pump capacity 2900rpm (minimum),discharge capacity of 19.0-11.1 liters per second at 16-30 meters head(minimum) with inbuilt strainer,suction & delivery pipe size is 80mmx65mm with necessary base plate for Pump set using angle iron of suitable size for base and frame complete as required at site including foundation bolts of suitable dia and suitable length including necessary civil works & PCC works complete to withstand the vibrations and following features all as per manufacturer instructions and including disconnection &taking out old unserviceable pump set including dismantling of damaged PCC from its existing location complete all as specified and directed (a) Motor shall be energy efficent motor conforming to IS-12615 (b) Body & pre filter made of cast iron. (c)prefilter basket made of stainless steel grade 304 (d)Shaft made of Stainless steel. (e)Sealing arrangement - Gland packing. (f) Impeller made of Stainless steel. (g)casing made of cast iron. (h)IP-55, F-class insulation. (i)Motor body made of Cast iron

Supply,install,comprising & testing of horizontal monoblock pumpset of capacity 5 Hp , 3-ph,50Hz,415 volts comprising of with motor & pump capacity 2900rpm minimum), discharge capacity of 8.5-5.8 liters per second at 20-36 meters head(minimum) with inbuilt strainer,suction & delivery pipe size is 60mm x 50mm with necessary base plate for Pump set using angle iron of suitable size for base and frame complete as required at site including foundation bolts of suitable dia and suitable length including necessary civil works & PCC works complete to withstand the vibrations and following features all as per manufacturer instructions and including disconnection &taking out old unserviceable pump set including dismantling of damaged PCC from its existing location complete all as specified and directed (a) Motor shall be energy efficent motor conforming to IS-12615 (b) Body & pre filter made of cast iron. (c)prefilter basket made of stainless steel grade 304 (d)Shaft made of Stainless steel. (e)Sealing arrangement - Gland packing. (f) Impeller made of stainless steel. (g)casing made of cast iron. (h)IP-55, B-class insulation. (i)Motor body made of cast iron.

Supply,install,comprising & testing of horizontal monoblock pumpset of capacity 3 Hp , 3-ph,50Hz,415 volts comprising of with motor & pump capacity 2900rpm minimum), discharge capacity of 5.7-2.0 liters per second at 12-36 meters head(minimum) with inbuilt strainer,suction & delivery pipe size is 50mm x 40mm with necessary base plate for Pump set using angle iron of suitable size for base and frame complete as required at site including foundation bolts of suitable dia and suitable length including necessary civil works & PCC works complete to withstand the vibrations and following features all as per manufacturer instructions and including disconnection &taking out old unserviceable pump set including dismantling of damaged PCC from its existing location complete all as specified and directed (a) Motor shall be energy efficent motor conforming to IS-12615 (b) Body & pre filter made of cast iron. (c)prefilter basket made of stainless steel grade 304 (d)Shaft made of Stainless steel. (e)Sealing arrangement - Gland packing. (f) Impeller made of stainless steel. (g)casing made of cast iron. (h)IP-55, B-class insulation. (i)Motor body made of cast iron.

Supply,install,comprising & testing of horizontal monoblock pumpset of capacity 1 Hp , 3-ph,50Hz,415 volts comprising of with motor & pump capacity 2900rpm minimum), discharge capacity of 1.7 - 0.4 liters per second at 16-32 meters head(minimum) with inbuilt strainer,suction & delivery pipe size is 25mm x 25mm with necessary base plate for Pump set using angle iron of suitable size for base and frame complete as required at site including foundation bolts of suitable dia and suitable length including necessary civil works & PCC works complete to withstand the vibrations and following features all as per manufacturer instructions and including disconnection &taking out old unserviceable pump set including dismantling of damaged PCC from its existing location complete all as specified and directed (a) Motor shall be energy efficent motor conforming to IS-12615 (b) Body & pre filter made of cast iron. (c)prefilter basket made of stainless steel grade 304 (d)Shaft made of Stainless steel. (e)Sealing arrangement - Gland packing. (f) Impeller made of stainless steel. (g)casing made of cast iron. (h)IP-55, B-class insulation. (i)Motor body made of cast iron.

Supply,install,comprising & testing of Jet pumpset of capacity 1.5Hp , 1-ph,50Hz,230 volts comprising of with motor & pump capacity 2900rpm (minimum),discharge capacity of 3600 - 720 liters per hour at 9 -36 meters depth to low water level (i.e suction lift) (minimum) with inbuilt strainer,suction & delivery pipe size is 40mm with necessary suitable base plate & foundation for Pump set including necessary civil works & PCC works complete to withstand the vibrations and following features all as per manufacturer instructions and including disconnection &taking out old unserviceable pump set including dismantling of damaged PCC from its existing location complete all as specified and directed. (a) Motor shall be energy efficent motor conforming to IS-12615 (b) Jet unit made of cast iron. (c)Motor body made of cast iron (d)Shaft made of carbon steel. (e) Impeller made of cast iron. (f)casing made of cast iron. (g)IP-44, B-class insulation. (i) Note: for item No.07 to 12: PCC work shall be measured and paid separately (ii) Note for item No.1 to 12: Old Unservecable pumpsets shall be handed over to AGE E/M-II(U) store yard. Make:Kirloskar/CG/Beacon

Supply,install,comprising & testing of ejection dewatering submersible pumpset of capacity 5Hp , 3-ph,50Hz,415 volts comprising of with motor & pump capacity 2900rpm (minimum),discharge capacity of 625-260 liters per minute at 16-22 meters head(minimum) Pipe size is 65mm with necessary foundation for Pump set to withstand the vibrations and following features all as per manufacturer instructions and all as specified and directed. (a) Motor shall be energy efficent motor conforming to IS-12615 (b)Impeller : Cast Iron (c)Delivery Casing : Cast Iron (d)Motor Body : Cast Iron (e)Pump Shaft : Carbon Steel (h)IP-68, B-class insulation. Make:Kirloskar/Jhonson/Beacon/CG

Design, fabrication, supply and errecting connecting and testing totally enclosed out door type 3.15mm thick,LT Cubical DOL starter panel board of size not less than 50cmx50xcmx30cm, 3 Phase 4 wire system ,double door front and back openeing type sloped canopy(Hood) on top extended , cable alley, provision of knock out type plates for various sizes of cable up to 25Sqmm Sqmm 4 Core in and out, CPRI approved factory made fabricated out of 3.15mm thik CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls , Panel mounted on suitable size of angle iron frame thick duly painted & it shall be fixed from 45cm of ground level and embeded in PCC 1:3:6 type C1, 20cm below ground level and 15cm above ground level including taking down old unserviceable and consisting the following provisions:-

Design, fabrication, supply and errecting connecting and testing totally enclosed LT Cubical DOL starter panel board of size not less than 50cmx50xcmx30cm, 3 Phase 4 wire system indoor type 2mm ,double door front and back openeing type sloped canopy(Hood) on top extended , cable alley, provision of knock out type plates for various sizes of cable up to 25Sqmm Sqmm 4 Core in and out, CPRI approved factory made fabricated out of 3.15mm thik CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy power coated mat finish of SIEMENTS GREY structral RAL 7032 shade colour, built in industrial type locking arrangement on front and back and pre wired with PVC insulated multi stranded copper conductor for controls , Panel mounted on suitable size of angle iron frame thick duly painted & it shall be fixed from 45cm of ground level and embeded in PCC 1:3:6 type C1, 20cm below ground level and 15cm above ground level including taking down old unserviceable and consisting the following provisions:- Make for Item No.14 & 15: MCB: L&T/Havells/Siemens,DOL starter: L&T/BCH,Single phase preventor: Minilec/GIC

Supply and laying PCC (1:3:6) 20mm graded aggregate type C1 for foundation complete all as directed by Engr-in-charge

Supply and laying PCC (1:2:4) type B2 40mm graded aggregate for foundation long complete all as directed by Engr-in-charge

M&L for flushing of the existing borewells of size 200/250 mm dia upto 300 feet depth by drilling machine by mechanically method into the above well connected to a pneumatic compressor after taking out the submersible pumpset with necessary hoisting equipment and flushing the bore well complete with compressor air and flushing bore well till discharge of fresh water is obtained subject to satisfactory job completion.

Supply and fixing of Flat Three Core 2.5Sqmm PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump sets,1100volts laid in borewell/surafce/wall/trench including necessary cable end terminations & cable gland,clamps complete all as directed by Engr-In-Charge

Supply and fixing of Flat Three Core 4.0Sqmm PVC Insulated & PVC Sheathed Industrial Cable for Submersible Pump sets,1100volts laid in borewell/surafce/wall/trench including necessary cable end terminations & cable gland,clamps complete all as directed by Engr-In-Charge Make for item No.18&19: Havells/FInolex/Finecab

S&F gun metal gate valves ISI marked with iron wheel head and both ends screwed with both ends for GI pipe and fixed and complete all as directed by Engineer-in-Charge. Make for item No.:- ZOLOTO/ LEADER/ ZEITH

25mm dia

40mm dia

50mm dia

Supply and laying GI tubing medium grade with fittings such as Tees,beand,union,elbow, nipple,collor,sockets, reducer,clamps etc,fixed any height of wall,surface, celing,laid in trenches,under ground etc including taking down old unserveable one complete all as specified and directed for the following sizes Make for item no. 21 to 21.03:Tata/jindal

50 mm dia

40mm dia

25 mm dia

Removing old unserviceable column pipe as obtained from lowering of submersible pump set and S&F new GI column pipe 50mm dia, heavy duty, ISI marked, 3 metre length each, both ends machine threaded with long threaded socket complete all as directed by Engr-in-Charger.

M&L for cable joint for water proof cable of 3 core 4.00 sqmm flat copper cable including testing and commissioning complete all as directed by Engineer-in-Charge.

M&L for cable joint for water proof cable of 3 core 2.5 sqmm flat copper cable including testing and commissioning complete all as directed by Engineer-in-Charge.

Supply and fix 50 mm Gun-metal NRV screwed both ends for GI pipe and fixed etc all as directed

Supply and fix 40 mm Gun-metal NRV screwed both ends for GI pipe and fixed etc all as directed

Supply and fix 25 mm Gun-metal NRV screwed both ends for GI pipe and fixed etc all as directed

SANJEEV CONSTRUCTIONS

Srinivasa Consructions

Haasith constructions

POWER CONSTRUCTION COMPANY