Nagarparishad malkichya imarati, shala, samajmandir, natyagruh rangkam karne shopping centre aadi imaratichi durusti karne.

Removing mud plaster including disposing of the spoils as directed with all leads, lifts etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 46.23 & PAGE NO.370

Removing old paint from steel and other metal surfaces and making the surfaces even with hand scrapping, scaffolding etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 35.18 & PAGE NO.276

Removing cement tiles, or marble or polished shahabad floor or dado without bed concrete including stacking the materials as directed with all leads, lifts etc. complete. As directed by Engineer in charge SSR OF 2022-23 ITEM NO. 46.19 & PAGE NO.370

Dismantling brick masonry in lime or cement mortar and stacking the materials as directed with all leads, lifts etc. complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 46.09 & PAGE NO.369

Providing and applying white-wash in two coats on old / new plastered or masonry surfaces and asbestos cement sheets including scaffolding and preparing the surface by brushing & brooming down etc. complete. Bd. P. I Page No. 411 SSR OF 2022-23 ITEM NO. 36.03 & PAGE NO.279

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete. As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 32.34 & PAGE NO.260

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 without neeru finish to concrete or brick surfaces, in all positions including scaffolding and curing etc. complete. Bd. L.2 Page No. 368 SSR OF 2022-23 ITEM NO. 32.03 & PAGE NO.256

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. Bd.L.7 Page No. 369 SSR OF 2022-23 ITEM NO. 32.11 & PAGE NO.257

Providing and applying Royale Luxury Emulsion of Asian / Berger / Nerolac / Dulex Paints or equivalent make on internal wall surface as detailed below Scrapping for surface with emery paper and wipe clean for area. Applying Asian / Berger / Nerolac / Dulex Paints or equivalent wall primer with brush by adding mineral turpentine oil by 8 to 10 % or water by 15 to 20% allowing to dry for 6 to 8 hoursAfter applying Asian / Berger / Nerolac / Dulex Paints or equivalent acrylic wall putty with appropriate prpportion of water of allow to dry for period of 4 to 6 hours of activity. Scrapping with emery paper and wipe clean Applying paints Royale Luxury emulsion 1st coat with brush water content water 40 to 45% or 65 to 70% by role Applying paints Royale luxury emulsion 2nd coat with brush with water content 40 to 45 % or 65 to 70 % by roller. (With prior approval of S.E.) As directed by Engineer in charge. SSR OF 2022-23 ITEM NO. 36.21 & PAGE NO.281

Providing and applying two coats Apex Ultima Puranature Anti-Pollution Or equivalent approved brand, paint should decomposes organic substances and inorganic gases(NOx, VOC’s, CO, SOx, formaldehydes, etc.) in presence of natural or artificial light. It contains Graphene and nanoparticles of titanium oxide. and Absorbs CO2 (4.8 kg/15 l). plaster crack should be filled by Acrylic base Crack seal /Textured Crack filler, Paint has to applied on one coat of Apex Ultima Puranature Anti-Pollution Primer or Equivalent. Warranty Should be given by the Manufaturer The work should be done by the Manufacturer Recommended applicator and he should be able to furnish stage wise onsite technical reports from the concerned company technologist. As directed by Engineer-in-charge SSR OF 2022-23 ITEM NO. 50.79 & PAGE NO.441